AT 2582 - Toaster SEVERIN - Free user manual and instructions

USER MANUAL AT 2582 SEVERIN

Labeled diagram of a modern toaster with numbered parts for identification and assembly reference.

Automatiktoaster

Before using the appliance, the user should read the following instructions carefully.

Familiarisation

1. Toast slot
2. Housing
3. Crumb tray
4. Power cord storage (on underside of appliance)
5. Continuously adjustable browning control knob
6. Bread roll warming top
7. Operating lever
8. Power cord with plug
9. Rating label (on underside of appliance)
10. Defrost function with indicator lamp
11. Eject button with main indicator lamp
12. Warm-up function with indicator lamp

Connection to the mains supply

The appliance should only be connected to an earthed socket installed in accordance with the regulations.

Make sure that the supply voltage corresponds to the voltage marked on the rating label.

This product complies with all binding CE labelling directives.

Important safety instructions

- There is always a danger that bread may catch fire, e.g. if it is toasted more than once or comes into contact with the heating elements. Therefore ensure that the appliance is not positioned or operated in close proximity to curtains or any such inflammable materials. Do not leave the appliance unattended during use.

- In order to prevent damage to the housing, do not position the appliance on or near hot surfaces or open flames such

as hot-plates or gas flames.

• Caution: the accessible housing surfaces become very hot during operation. Burns can occur from touching the hot parts.
  ● Always position the appliance on a level heat-resistant surface.
  ● Before the appliance is used, the main body as well as any attachment fitted should be checked thoroughly for any defects. Should the appliance, for instance, have been dropped onto a hard surface, it must not be used any longer: even invisible damage may have adverse effects on the operational safety of the appliance.

- Do not cover the toast slot during operation.

- Do not try to remove bread from the toaster with your fingers or insert any other objects (eg knives, forks) into the toast slot as the heating elements carry a live current.

● The power cord should be regularly examined for any signs of damage. In the event of such damage being found, the appliance must no longer be used.

- Do not allow the power cord to touch hot surfaces.

- Do not let the power cord hang free.

● Always remove the plug from the wall socket after use, and also - in case of any malfunction, - when fitting or removing the warming top, - when cleaning the appliance.

- When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself.

● The appliance is not intended to be operated by means of an external timer or separate remote-control system

● This appliance is not intended for use by any person (including children) with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person

responsible for their safety.

● Children should be supervised to ensure that they do not play with the appliance.
- No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with.
● This appliance is intended for domestic use only and not for commercial applications.
- In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The address can be found in the appendix to this manual.

Operation

General information

• Day-old, dry bread darkens faster than fresh bread. For brown bread, adjust the browning control to a higher setting than for toasting white bread.
• Do not use slices which are too thick or too big, as they may become stuck in the toaster. The thickness of the slices to be toasted should not exceed 25 mm.
• In case of problems or malfunctions during use, and before cleaning, always remove the plug from the wall socket.
• To remove a slice stuck in the toast slot, use a blunt wooden implement (eg a brush handle). Never touch the metal heating elements.
• Variations in bread type, humidity content and thickness of the slices result in different degrees of browning. The bread should therefore be kept in a sealed wrapping.

Before using for the first time

• Clean the toaster thoroughly (see General care and cleaning).
• Switch on the toaster without any bread inserted and go through at least five toasting cycles at the maximum

temperature setting.

• Allow the toaster to cool down between cycles.
• Note: the operating lever locks down only when the plug is inserted.
• When switching on the appliance for the first time, the toaster may emit a slight smell and a little smoke, but this will disappear after a short while. Ensure sufficient ventilation.

Adjusting the degree of browning

The desired degree of browning can be varied by turning the adjustable browning control knob.

Light: turn the control knob anti-clockwise.

Dark: turn the control knob clockwise.

In the case of sliced bread specifically intended for toasting, we recommend a browning control setting of 3 to 4.

Operation

• After adjusting the browning control, insert the bread into the toast slot and press the operating lever down. The indicator lamp will go on.
• Once the desired degree of browning is reached, the toaster switches off automatically; the slices are ejected, and can be removed once the indicator lamp goes off.
• Easy lift-out: to facilitate lifting the bread slices out, push the operating lever up.
• To achieve regular browning when toasting several slices in succession, allow the toaster to cool down for 60 - 90 seconds after each cycle.
  ● The toasting time may be shortened as a result of fluctuations in the power supply.
• Do not cover the toast slot during operation.

Defrost function

The defrost function may be used in addition to the normal action when toasting deep-frozen bread. This will extend the toasting process. This function is shown by the indicator lamp.

Warm-up function

The warm-up function is suitable for reheating bread which has already been toasted. Caution: do not warm up buttered bread. After activating the toasting function, the warm-up function can be used in addition. This function is shown by the indicator lamp.

Interrupting the toasting cycle

If you want to interrupt the toasting cycle, press the eject button. The toaster will switch off and the slices are ejected.

Warming up rolls, buns etc.

● Always remove the plug from the wall socket before the warming top is fitted or removed.
- To warm up rolls, buns or other bakery items, fit the warming top on to the toast slot.
- Insert the plug into a wall socket.
- Place the items to be warmed up on the top, adjust the browning control to a medium setting and then push down the operating lever to switch on the toaster.
- Once the browning cycle is complete and the appliance has automatically switched off, turn the roll or bread over and repeat the cycle.
- Do not place the items directly on the toast slot.

General care and cleaning

● Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely.
● To avoid the risk of electric shock, do not clean the toaster with water and do not immerse it in water.
- Do not use abrasives or harsh cleaning solutions.
- The housing and the warming top may be wiped with a dry or slightly damp lint-free cloth.

Crumb tray

During use, any bread crumbs falling down are collected in the crumb tray. To empty the tray, pull it out sideways.

Power cord storage

Unwind the power cord completely before operation and make sure it is kept well away from the appliance.

Allow for a sufficient cooling-down period before winding up the power cord after use.

Disposal

Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points.

Guarantee

This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse.

This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase.

F

Czech Republic / Slowak

Republic

ARGO spol. s r.o.

Žihobce 137

CZ 342 01 Sušice

Tel.: [phone]

Fax: [phone]

Narva: CENTRALSERVICE,

Tallinna 6A, tel: [phone]

Haapsalu: Teco KM OÜ,

Jalaka 1A, tel: [phone]

Pikk 1B, tel: [phone]

Bahar Administration and

Commercial Center

No. 668, 7th Floor, Ave.

South Bahar

TEHRAN-IRAN

Tel.: [phone]

e-mail: [e-mail]

Internet: www.iranseverin.com

Italia

via Dino Col 52r-54r-56r,

I - 16149 Genova

Green Number: 800240279

Tel.: [phone]

Fax: [phone]

e-mail: [e-mail]

Jordan

F.A. Kettaneh

P.O. Box 485

Amman, 11118, Jordan

Tel: [phone]

e-mail: [e-mail]

Korea

Euko Trading

Namho B/D 3F, 194-6,

Neungpyeong-Ri

Opo.Eup, Gwangju-Si,

Kyunggi-do

Korea 464 892

Tel: [phone]

Fax: [phone]

Service Hotline: [phone]

Latvia

SERVO Ltd.

Mr. Janis Pivovarenoks

Tel: [phone]

[e-mail]

Lebanon

The Right Angle S.A.L.

Boulos Building

Hazmieh- Damascus Highway

P.O. Box 1656-09

BEIRUT, Lebanon

Tel.: [phone] and 3

Fax: [phone]

e-mail: [e-mail]

Luxembourg

Ser-Tec

Serbia and Montenegro

tel: [phone]

tel: [phone]

fax: [phone]

Finland

Oy Harry Marcell Ab

Rälssitie 6, PL 63

01511 Vantaa