CENIODIGIN104 - Uncategorized Crestron - Free user manual and instructions

USER MANUAL CENIODIGIN104 Crestron

Read these instructions.

Keep these instructions.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the equipment. When a cart is used, use caution when moving the cart/equipment combination to avoid injury from tipping over.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Disconnect power prior to connecting or disconnecting equipment.

Do not install in direct sunlight.

The apparatus must be installed in a way that the power cord can be removed either from the wall outlet or from the device itself in order to disconnect the mains power.

Prevent foreign objects from entering the device.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing. Objects filled with liquids, such as vases, should not be placed on the apparatus.

To prevent electric shock, do not remove cover. There are no user serviceable parts inside. Only qualified service personnel should perform service. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This is an apparatus with Class I construction. It shall be connected to an electrical outlet with an earthing ground terminal. IMPORTANT: This device can be used with Class 2 output wiring.5 • Safety Instructions Safety Instructions — Doc. 6607C Waste Electrical & Electronic Equipment Directive The Waste Electrical & Electronic Equipment (WEEE) directive marking on a product indicates that it should not be disposed of with general waste. Instead, you are encouraged to reuse or recycle the product in accordance with Directive 2012/19/EU of the European Union. Proper disposal of this product will help prevent potential negative effects on the environment and human health, which could otherwise be caused by inappropriate waste handling. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. For information about recycling this product, please contact your household waste disposal service, your original distributor, or Crestron. Contact If you have any questions, please contact Crestron. North and South America: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 USA Europe, Middle East, and Africa: Crestron Europe BV Oude Keerbergsebaan 2, 2820 Rijmenam, Belgium VAT No. BE0699.717.121 Australia and New Zealand: Crestron ANZ PTY. Ltd. Level 5, 15 Help Street, Chatswood NSW 2067, Australia Asia: Crestron Singapore Pte. Ltd. 30, rue Cecil #21-05, Tour Prudential 049712 de Singapour Phone: Please visit crestron.com to find the phone number for Crestron support in your region. Email: satisfaction@crestron.com or support@crestron.comSafety Instructions — Doc. 6607C Safety Instructions • 6 中文，简体 (Chinese, Simple)

OU D'ÉLECTROCUTION, N'EXPOSEZ PAS

GEPLAATST WORDEN. WAARSCHUWING: