KMPM5W - Earphones Krüger&Matz - Free user manual and instructions

Product type	Headphones
Brand	Krüger&Matz
Model	KMPM5W
Wireless technology	Bluetooth
Bluetooth version	4.0
Supported Bluetooth profiles	A2DP 1.2, AVRCP 1.4, HSP 1.2, HFP 1.6, CVC 6.0
Audio codecs	SBC, AAC, apt-X
Bluetooth range	Up to 10 m
Talk time	Up to 7 hours
Standby time	Up to 240 hours
Music play time	Up to 8 hours
Active noise cancellation	Yes
Protection rating	IPX4 (splash-resistant)
Built-in microphone	Yes
Multi-point connection	Yes (up to 2 devices)
Frequency response	20 Hz - 20 kHz
Impedance	16 Ω
Sound pressure level (SPL)	91 ± 3 dB
Power supply	Rechargeable battery via micro USB port
Care and cleaning	Use a damp cloth, no chemical cleaners
Safety	Do not use at high volume or while driving

Frequently Asked Questions - KMPM5W Krüger&Matz

How to turn the Krüger&Matz KMPM5W headphones on and off?

To turn on, press and hold the multifunction (MF) button for about 2 seconds until the blue LED flashes twice. To turn off, press and hold the same button for about 3 seconds until the red LED flashes twice.

How to pair the headphones with a smartphone?

Make sure the headphones are off. Press and hold the MF button for about 5 seconds until the LED flashes alternately red and blue (pairing mode). Enable Bluetooth on your phone and select 'KMPM5W' from the device list. If required, enter the PIN '0000'.

How to skip to the next or previous track?

To skip to the next track, press and hold the volume up (+) button for about 2 seconds. For the previous track, press and hold the volume down (-) button for about 2 seconds.

How to answer or reject a call?

To answer an incoming call, briefly press the MF button. To hang up, press MF again. To reject a call, press and hold the volume up (+) button.

How to use the dual phone connection function?

After pairing the first phone, turn off the headphones. Pair the second phone in the same way. Turn off and then on the headphones. Then press the + and - buttons simultaneously to activate dual connection. On the second phone, select the headphones from the Bluetooth list.

What is the battery life of the headphones and how to charge them?

Battery life is about 8 hours of music playback, 7 hours of talk time, and up to 240 hours of standby. To charge, plug the provided micro USB cable into the charging port and into a USB charger or computer. The red LED indicates charging, it turns blue when fully charged. Use only original accessories.

Are the headphones water-resistant?

Yes, they have IPX4 certification, meaning they resist splashes and sweat, but should not be submerged or exposed to strong water pressure.

How to clean the headphones?

Use a soft, slightly damp cloth to wipe the surface. Never use chemical cleaners or harsh detergents. Avoid getting water into the openings.

What to do if the headphones do not connect?

Make sure the headphones are in pairing mode (red/blue flashing LED). Check that your phone's Bluetooth is on and that the headphones are not already connected to another device. Try turning the headphones off and on again, then reset the Bluetooth connection on your phone by forgetting the device.

Is it possible to use the headphones while driving?

No, it is prohibited to use headphones while driving a vehicle (car, motorcycle, bicycle, etc.) as it can reduce awareness of surrounding sounds and compromise your safety. Use them only in situations where you can hear ambient noises.

USER MANUAL KMPM5W Krüger&Matz

Wireless earphones KMPM5

OWNER'S MANUAL

Bezpečnostní pokyny

Simple line drawing of an oval shape with no text or symbols

Read the instruction manual carefully before first use and keep it for future reference.

- Minimize the volume on your audio device before connecting the earphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout entire time of using the earphones. To prevent damage to your hearing, do not raise the volume too high.

- Do not use the earphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling). Never use the earphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.

- Stop using the earphones if you feel a tinnitus, hearing discomfort, irritation or have other adverse reactions.

- Do not subject the earphones to strong impact.

- Protect this product from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.

- Never use this device if it is damaged.

- Use only authorized accessories.

- Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for check-up/repair.

- Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

Product description

1. Volume up/Next /Reject call/Transfer call
2. Multifunction button MF: Turn on/Pairing mode /Play/Pause/Turn off /Answer call/End call
3. Volume down/Previous
4. LED indicator
5. micro USB slot
6. MIC

Pairing (with one device)

1. Make sure the earphones are powered off.
2. To enter into the pairing mode, press and hold the multifunctional button for 5 seconds until red LED & blue LED flash alternately.

3. Activate your phone (or device) Bluetooth function and search for external devices. You'll see a list of available devices; find and connect with the earphones.

4. Enter "0000" PIN if necessary.

Pairing (with two devices)

This earphones support 2 devices multi-connection. It can pair with two mobile phones simultaneously, and take the call from any of them.

1. After completing pairing with the first phone, turn off the earphones.
2. Then re-do the paring procedure with another phone.
3. Once the pairing is finished, restart the earphones. The earphones will automatically connect to the phone (or device) that was connected before disconnecting.
4. Short press the “volume +” and “volume -” keys simultaneously, it will enable the multipoint connect function. From the list of found devices on another mobile phone, select the earphone to connect it. Now, the earphones are connected with two devices simultaneously.

Operation

• Power on: press multifunction button for 2 seconds. Blue LED flashes 2 times. Earphone turn on.

- Power off: press multifunction button for 3 seconds. Red LED flashes 2 times, then the earphones turn off.

• Volume adjust: press ,Volume up' or , Volume down' buttons to change volume level.

- Play/Pause: press multifunction button to pause music playback. Press it again to resume playback.

- Previous: press and hold for 2 seconds, Volume down' button to go to previous track.

- Next: press and hold for 2 seconds, Volume up' to go to next track.

- Answer call: press multifunction button to answer the incoming call.

• End call: short press multifunction button.
- Reject call: press and hold the ,Volume up' button to reject a call.
- Transfer call: during a phone call, press and hold ,Volume up' button, call switches to mobile phone. Press and hold ,Volume up' button again, call switches back to earphone.
- Last number redial: in standby status, press earphone multifunction button twice to redial the last number. In case of multipoint connection with two phones, the redial will be performed from the phone connected first.
- Battery Capacity status: when earphone is connected to iOS devices, iOS devices shows the earphone battery power status in the upper right corner.

Operation LED Status
Power on Blue	LED flashes 2 times
Power off Red	LED flashes 2 times
Pairing Red LED & Blue LED flashes alternately
Standby Blue	LED flashes 3 times every 5 seconds
Incoming call Blue LED blinks
Low battery Red	LED flashes 2 times every 2 seconds
Charging Red	LED keep lighting during charging. Blue LED keep lighting charging finished

Sound quality with apt-X® code

Featuring the apt-X code, the earsets can connect wirelessly to any apt-X® enabled devices, vastly improves the quality of Bluetooth streaming, delivering

CD-quality sound.

Charging

Connect the earphones to AC charger or a computer USB port. Red LED keeps lighting during charging. Once the charging is completed, the blue LED is on.

Note:

• use only original accessories to charge the earphone.
• charge the earphone if it has not been used for more than 12 months.

Specification

• Frequency Response: 20 Hz - 20 KHz
- Impedance: 16 Ω
- SPL (Sound pressure level): 91 ± 3 dB
- Bluetooth version: 4.0
- Bluetooth profiles: A2DP 1.2/AVRCP1.4/HSP1.2/HFP1.6/CVC6.0
• Supports SBC, AAC
- apt-X® audio technology
- Noise reduction function
• Wireless range: up to 10 m
- IPX4 water-proof
• Build in microphone
• Supports connection with 2 devices
- Earphone battery power status (iOS only)
- Talk time: up to 7 h
- Stand-by time: up to 240 h
- Playback time: up to 8 h

Specifications are subject to change without prior notice.

"The Lechpol company declares that product KMPM5 is consistent with the essential requirements and other relevant provisions of directive 1999/5/EC. The proper declaration for download from www.lechpol.eu"

English Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.

Made in China for LECHPOL Zbigniew Leszek, Miętne, 1 Garwolińska Street, 08-400 Garwolin.

Abstract curved line drawing with no text or symbols

FR

Abstract wavy line pattern with gradient shading, no text or symbols present

www.krugermatz.com

Krügera-Matz is a registered trademark