VATTENSTEN - Lighting IKEA - Free user manual and instructions

Product type	LED luminaire
Brand	IKEA
Model	VATTENSTEN
Usage	Indoor only
Power supply	5 VDC, max 3A, 15W
Light source	Non-replaceable LED
Cable length	Approximately 1.5 m
Main functions	Fixed intensity accent lighting
Maintenance	Clean with a damp cloth, avoid strong detergents
Safety	Do not disassemble, do not immerse, check cable and transformer regularly
Mounting	Permanent adhesive tape (non-removable)
Cuttable	Yes, at the marked locations, with the device unplugged
Compliance	Class 2 or limited power source (LPS)
Color temperature	Not specified (estimated 3000K)
Protection rating	IP20 (indoor dry)

Frequently Asked Questions - VATTENSTEN IKEA

Can I cut the VATTENSTEN LED strip?

Yes, the strip can be cut at the marked locations. Make sure the device is unplugged before cutting.

How do I clean the VATTENSTEN luminaire?

Clean with a damp cloth. Avoid strong detergents that could damage the surface.

Can I replace the LEDs of the VATTENSTEN?

No, the LEDs are integrated and non-replaceable. Do not disassemble the product, as the diodes can cause eye injury.

What type of power supply should I use for the VATTENSTEN?

Use a Class 2 or LPS LED power supply with an output of 5 VDC, max 3A, max 15W.

Is the adhesive tape removable?

No, the mounting tape is permanent. Removing it may damage the underside of the lamp.

Can I use the VATTENSTEN outdoors?

No, the luminaire is designed for indoor use only. Do not expose it to moisture.

What should I do if the cable is damaged?

If the cable, transformer, or other parts are damaged, do not use the product and replace it.

How to mount the VATTENSTEN?

Use the provided adhesive tape. Make sure the surface is clean and dry before application.

Is the VATTENSTEN dimmable?

No, the light intensity is fixed. There is no dimming function.

Can I submerge the VATTENSTEN in water?

No, never immerse the product in water. This could cause an electric shock or damage the luminaire.

USER MANUAL VATTENSTEN IKEA

Design and Quality
IKEA of Sweden

English

IMPORTANT SAFETY INSTRUCTIONS

For indoor use only.

Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used.

Important information! Keep these instructions for future use.

2 AA-2324197-3

CAUTION!

The light source of this product is non-changeable light diodes (LED).

Do not disassemble the product, as the light diodes can cause damage to the eyes.

Do not immerse in water.

Cleaning

Use a damp cloth, never a strong cleaning agent.

English

1. Wipe the surface dry where the tape will be used with a clean and dry cloth.
2. The assembly tape is permanent and is not intended to be removed. You might damage the surface under the lamp if you try to remove the tape.
3. Please keep the unused fittings for future use.

English

WARNING

Deviation from the assembly instructions may result in a risk of fire or electric shock.

English

Only for use with LED driver with Class 2 output or Class 2 Power supply or Limited Power Source (LPS): rated 5 VDC, max. 3A, max. 15W.

SAVE THESE INSTRUCTIONS

4 AA-2324197-3

François

CONSIGNES DE SECURITÉ IMPORTANTES

The light strip can be cut at the marks. Make sure that the device is unplugged when you cut.

François