Vintage Tube Overdrive TO800 - Guitar BEHRINGER - Free user manual and instructions

USER MANUAL Vintage Tube Overdrive TO800 BEHRINGER

Thank you for showing your condence in us by purchasing the Behringer VINTAGE TUBE OVERDRIVE TO800. This high-quality eects pedal is ideally suited for giving electric guitars maximum exibility with classic overdrive sounds that capture every nuance of your playing—from smooth overdrive to screaming tube sounds. Thanks to its high-performance features you get tube-like vintage-style distortion, smooth sustain and super fat tone.

(1) The DRIVE control adjusts the intensity of the overdrive eect. (2) The LEVEL control adjusts the output level. (3) The TONE control allows you to shape your overall sound. (4) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.(5) Use the footswitch to activate/deactivate the eect. (6) Use this ¼" TS IN connector to plug in the instrument cable. (7) The ¼" TS OUT connector sends the signal to your amp. Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit. ◊◊ The TO800 has no on/o switch. As soon as you insert the jack into the in connector, the TO800 begins running. When not using the TO800, remove the jack from the in connector. This extends the life of the battery.The SERIAL NUMBER is located on the bottom.V 1.0

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

Impedance 500 k Impedance 1 k Power Supply 9 V𝌂, 100 mA regulated PSU-SB-CN Behringer 220 VAC adaptor China PSU-SB-EU Behringer 230 VAC adaptor Europe PSU-SB-JP Behringer 100 VAC adaptor Japan PSU-SB-SAA Behringer 240 VAC adaptor Australia PSU-SB-UK Behringer 240 VAC adaptor UK PSU-SB-UL Behringer 115 VAC adaptor USA Power connector 2 mm DC jack, negative center Battery 9 V type 6LR61 Power consumption 30 mA Physical/Weight Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄" (H x W x D) approx. 54 x 70 x 123 mm Weight approx. 0.73 lbs / 0.33 kg Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.3

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC. Full text of EU DoC is available at https://community. musictribe.com/ EU Representative: Music Tribe Brands DK A/S Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark