AEG SB2500 - Blender

SB2500 - Blender AEG - Free user manual and instructions

Find the device manual for free SB2500 AEG in PDF.

📄 40 pages English EN Download 💬 AI Question ⚙️ Specs
Notice AEG SB2500 - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
SKIP

Frequently Asked Questions - SB2500 AEG

User questions about SB2500 AEG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Blender in PDF format for free! Find your manual SB2500 - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SB2500 by AEG.

USER MANUAL SB2500 AEG

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

Visit our website to:

AEG SB2500 - 1

Get usage advice, brochures, trouble shooter, service information: www.aeg.com/webselfservice

AEG SB2500 - 2

Register your product for better service: www.registeraeg.com

AEG SB2500 - 3

Buy accessories and consumables for your appliance: www.aeg.com/shop

CUSTOMER CARE AND SERVICE

When contacting Service, ensure that you have the following data available:

  • Model Number
  • PNC number
  • Serial number

The information can be found on the rating plate.

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes.

COMPONENTS

A. Spill-proof drinking lid
B. Spill-proof drinking lid with carry handle*
C. Blend bottle
D. Blade assembly
E. On-Off button

F. Blender base
G. Power cord
H. Cooling stick
I. Thermo cover

  • Certain models only

Picture page 2-3

GETTING STARTED

Before first use: Clean the blender according to the instructions in "Cleaning and Care". Fill the bottle with ingredients. Caution! Do not exceed the maximum filling volume: 600 ml. Do not mix dough, mashed potatoes, meat etc.
2 Fasten the blade assembly on the open end of the bottle, by turning it counterclockwise. Caution! The blades and inserts are very sharp!
3 Place the blender base on a flat, level surface. Plug into a power outlet.
Turn the bottle upside down. Push down the bottle into the blender base and rotate it counterclockwise to lock. Note: When locked, the symbol on the blender assembly should be aligned with 0 on the blender base. Caution! To reduce risk of injury, never place the blade assembly on the base without the bottle properly attached.
5 Push and hold the On-Off button to start mixing. The indicator light will illuminate until the On-Off button is released. Release the On-Off button to stop mixing. Caution! If the motor stalls, turn the blender off immediately, unplug the appliance and let it cool for at least 10 minutes.
When the ingredients are fully mixed: Release the On-Off button to stop mixing. Make sure the motor has stopped completely, then turn the bottle clockwise to loosen it. Remove the bottle from the blender base. Replace the blade assembly with the drinking lid.

USING THE COOLING STICK* (*CERTAIN MODELS ONLY)

The cooling stick cools down and maintains the temperature of your freshly prepared blends.
Unscrew the cap of the cooling stick (H) and fill it with tap water until the MAX mark. Screw the cap back on the cooling stick and place it in the freezer until the water freezes.
Screw the frozen cooling stick on the drinking lid with carry handle (A). Attach it on the blend bottle (C).

The cooling stick can be cleaned in a dishwasher.

USING THE THERMO COVER* (CERTAIN MODELS ONLY)

Thermo cover performance: Keeps liquids at the same temperature longer, whether cold or hot beverages.

Place the bottle into the cover and close the zipper.

CLEANING AND CARE

10 Unplug the appliance. The Tritan plastic bottle and lid are dishwasher-safe. Please wash the blades by hand. Caution! The blades and inserts are very sharp!
Clean the blender base with a damp cloth. Caution! Never immerse the blender base in water! Do not use abrasive cleaners or scouring pads when cleaning the appliance.

Enjoy your new AEG product!

SAFETY ADVICE

Read the following instruction carefully before using the appliance for the first time.

  • This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance.
  • The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate!
  • Never use or pick up the appliance if:

  • the supply cord is damaged,

  • the housing is damaged.

  • If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person, in order to avoid hazard.

Always place the appliance on a flat, level surface.
- Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.

  • Do not immerse the appliance in water or any other liquid.
  • Do not let cord hang over edge of table or counter, do not let cord contact hot surface, including the stove.
  • Never use accessories or parts made by other manufactures not recommended or sold; may cause a risk of injury to persons.
  • Make sure the motor has completely stopped before disassembling and cleaning.
  • Avoid contact with moving parts. Contact could result in injury!
  • The blades and inserts are very sharp! Danger of injury! Caution when assembling, disassembling after use or when cleaning! Ensure that the appliance is disconnected from the mains supply.
  • Do not use the appliance for other purpose than its intended use.
  • Do not attempt to bypass the safety interlock system that powers the appliance on.
  • Never process boiling liquids (max 80^ ).
  • Do not let this appliance run for more than 1 minutes at a time using heavy loads. After running for 1 minutes with heavy loads, the appliance should be left to cool for at least 10 minutes.
  • When the mixer is subject to heavy use for chopping hard, dry substances such as nuts, the blades may become blunt. The mixer is not suitable for crushing ice, e.g. for cocktails. It is possible to add nuts occasionally to a mixture as long as this is not done on a continuous basis, as this will blunt the blades.

  • Do not use this appliance to stir paint. Danger, could result in an explosion!

  • Do not exceed the maximum filling volume as indicated on the appliance.
  • This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION
The appliance does not turn on. The appliance is not connected to a power source.Connect the appliance to a power source.
The bottle and blade assembly is not installed correctly in the blender base. The safety interlock system prevents the machine to power on.Install the bottle and according to instructions in “Operating instructions”.
Contact authorized service.
The motor stalls during operation. If the motor stalls, turn the blender offimmediately, unplug the appliance and let it cool for at least 10 minutes.
Ingredients are too large. Cut all firm fruits and vegetables into pieces no larger than 1.8 cm2to 2.5 cm2.
Wrong ingredients. The appliance intended use is production of beverages. Add fruits, vegetables or similar. Never mix ingredients such as dough, mashed potatoes, meat or similar.

RECIPES

MAXIMUM PROCESSING TIME WITH HEAVY LOAD MAXIMUM CAPACITY
1 min 600 ml
RECOMMENDED BLENDING SPEED
Recipe Ingredients Quantity Time
Pureeing raw vegetablesCarrots 40 g
Potatoes40g
Onions40 g
Water80 ml
Pureeing cooked vegetablesOnions25g
Carrots 50 g
Potato50g
Zucchini50g
Water100ml
Pitaya and cauliflowerWater120ml
Pitaya½ - ½pcs
Carrots ¼ - ½ pcs
Cauliflower30g
Pineapple-apricots SmoothiePineapple in slices 60 g
10 S x (4-6) timesD
Yoghurt 75 g
Apple and cauliflowerApple 1/4 - 1/2 pcs
Cauliflower 30-50 g
Lemon 1/4 pcs
Water 120 ml
VitamineApple 40 g
Banana50g
Papaya100g
Milk150ml
Celery and tomatoCelery200g
Tomato1/2pcs
Water 120 ml

GB

DE

ES

FR

GR

NL

PT

DISPOSAL

AEG SB2500 - DISPOSAL - 1

This symbol on the product indicates that this product contains a battery which shall not be disposed with normal household waste.

AEG SB2500 - DISPOSAL - 2

This symbol on the product or on its packaging indicates that the product may not be treated as household waste. To recycle your product, please take it to an official collection point or to an AEG service center that can remove and recycle the battery and electric parts in a safe and professional way. Follow your country's rules for the separate collection of electrical products and rechargeable batteries.

AEG reserves the right to change products, information and specifications without notice.

DEUTSCH

600ml bottle Cooling Stick

Ref: ASBS1

PNC: 900168900/0

AEG SB2500 - DEUTSCH - 1

Chopper

Ref: ASBC1

PNC: 900168902/6

AEG SB2500 - DEUTSCH - 2

2x 300ml bottle

Ref: ASBEB2

PNC: 900168109/8

AEG SB2500 - DEUTSCH - 3

2x 600ml Bottle Covers

Ref: ASBBC1

PNC: 900169030/5

AEG SB2500 - DEUTSCH - 4

2x 300ml Bottle Covers

Ref:ASBBC2

PNC: 900169031/3

AEG SB2500 - DEUTSCH - 5

CoffeeGrinder

Ref: ASBG1

PNC: 900168901/8

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : AEG

Model : SB2500

Category : Blender