Corvette 8X42 - Binoculars BRESSER - Free user manual and instructions
Find the device manual for free Corvette 8X42 BRESSER in PDF.
Frequently Asked Questions - Corvette 8X42 BRESSER
User questions about Corvette 8X42 BRESSER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Binoculars in PDF format for free! Find your manual Corvette 8X42 - BRESSER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Corvette 8X42 by BRESSER.
USER MANUAL Corvette 8X42 BRESSER
natural_image
Black binoculars with visible lenses and no text or symbols on the device itself
BRESSER®
text_image
Prohibition sign with sun and eye symbol, crossed by a diagonal lineBRANDGEFAHR!
This instruction manual was created for various models in our series of binoculars. Pages 2-7 present the relevant features in pictures. Depending on the model you have purchased, this chapter of the manual covers the binoculars in full or in part. As a result, please pay attention to the letters (P, R or C) to make sure that a chapter applies to your model.
Please read this manual carefully and completely before using the binoculars.
Your
BRESSER Team
P = Porro prism model · R = Roof prism model · C = Compact model
General Safety Informations!
RISK of physical injury!
Never look through this device directly at or near the sun. There is a risk of BLINDING YOURSELF!
Children should only use this device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children. There is a risk of SUFFOCATION.

natural_image
Prohibition sign with sun and eye symbol (no text)Fire/Burning RISK!
Never subject the device - especially the lenses - to direct sunlight. Light ray concentration can cause fires and/or burns.
RISK of material damage!
Never take the device apart. Please consult your dealer if there are any defects. The dealer will contact our service centre and send the device in for repair if needed.
Do not subject the device to temperatures exceeding 60°C!
BINOCULARS
List of Parts
① Centre axle
②a Twist-up eyecups
or
②b Rubber eyecups
3 Dioptre adjustment
4 Body of the binoculars
5 Lens tube
6 Central focussing wheel
⑦ Eyepiece
8 Objective lens
9 Threaded tripod connection
10 Image circle with correctly set eye distance
Eyepieces for spectacle wearers P R C
Depending on the model, your binoculars are equipped with either twist-up eyecups (2a) or rubber eyecups (2b). Since there is a larger distance between the binocular eyepiece and the pupil for those wearing glasses, both eyecup varieties can be adjusted individually.
Twist-up Eyecups (2a)
Screw in the twist-up eyecups (2a) to use the binoculars while wearing glasses. If you are not wearing glasses, unscrew the eyecups to achieve the required distance from the pupils. OR
Rubber Eyecups (2b)
To use the binoculars while wearing glasses, turn the rubber eyecups (2b) towards the sides and down. If you are not wearing glasses, leave the eyecups in the upright position to achieve the required distance from the pupils.
Adjusting the eyepiece distance P R C
The distance between the eyes differs between individuals. To achieve perfect interaction between your eyes and the eyepieces of your binoculars set the angle at the centre of the binoculars (1) so that you see a circular image (10). Note this setting for later use.
Adjusting the focus P R C
Look through your binoculars with your right eye closed. Now adjust the image for your left eye using the centre wheel (6) until it is sharp and
clear. Close your left eye and adjust the image for your right eye using the dioptre ring (3) until it too is sharp and clear.
Mounting the binoculars on a tripod PR
Your binoculars have a threaded tripod connection (9) built in. The required tripod adapter is available as an optional accessory (Art. No. 19-16000 or 19-16500). With this accessory, you are able to mount your binoculars on a tripod with a DIN mounting thread (e.g. Art. No. 49-22100).
TIPS on cleaning
Lenses (eyepieces and/or object lenses) should be cleaned with a soft, lint-free cloth (e.g. micro-fibre) only. Do not use excessive pressure - this may scratch the lens.
Dampen the cleaning cloth with a spectacle cleaning fluid and use it on very dirty lenses.
Protect the device against dirt and dust. Leave it to dry properly after use at room temperature. Then put the dust caps on and store the device in the case provided.
JUMELLES
Chère cliente, cher client,
text_image
Prohibition sign with sun and eye symbol crossed out, indicating no protection or absence of visual signsDANGER D'INCENDIE!
natural_image
Prohibition sign showing sun above eye and no text or symbolsGEVAAR voor brand!
text_image
Prohibition sign with sun and eye symbol, crossed out by a diagonal linePERICOLO DI INCENDIO!
text_image
Prohibition sign with sun and eye symbol crossed out, indicating no protection or absence of visual signstext_image
Prohibition sign with sun and eye symbol, no text presentRISCO DE INCÊNDIO!
text_image
Prohibition sign with sun and eye symbol, crossed out by a diagonal lineΚΙΝΔΥΝΟΣ ΠΥΡΚΑΓΙΑΣ!
text_image
Prohibition sign with sun and eye symbol crossed out, indicating no protection or absence of visual signsKIKKERTER
Produktoversigt
text_image
Prohibition sign with sun and eye symbol crossed out, indicating no protection or absence of visual signsTULIPALON VAARA!
text_image
Prohibition sign with sun and eye symbol, crossed out by a diagonal lineNEBEZPEČÍ POŽÁRU!
natural_image
Prohibition sign with sun and eye symbol (no text)NIEBEZPIECZEŃSTWO POŻARU!
text_image
Prohibition sign with sun and eye symbol, no text presentОПАСНОСТЬ ПОЖАРА!
GB Warranty & Service
The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.bresser.de/warranty_terms.