12757 - Can opener Rösle - Free user manual and instructions

Frequently Asked Questions - 12757 Rösle

USER MANUAL 12757 Rösle

Line drawing of a mechanical tool or tool with a circular component and handle (no text or symbols)

Technical line drawing of a mechanical clamp or tool with no visible text or symbols

Diagram showing a mechanical assembly with two cylindrical components connected by ropes, before and after a close-up of a wire loop (no text or symbols present)

4. Reinigung

Thank you for choosing the superior quality Can Opener with pliers grip by RÖSLE. It's a wise choice and one that will prove the test of time as a durable top quality product. To make sure you get optimum results and long-lasting service from your new kitchen utensil, we've compiled some important information plus tips for optimal use and aftercare, as well as safety guidelines.

1. Outstanding product features at a glance:

The RÖSLE Can Opener with pliers grip makes opening all standard food cans or pet food tins* easy and convenient.

→ Easy positioning of the Can Opener with pliers grip onto the can top.
→ Ergonomically shaped thumbscrew for smooth and effortless turning.
→ Safe work due to lateral cutting which avoids the creation of sharpedges along rim and lid.

→ Integrated pliers for lifting lid from can base. The lid can be re-used as a cover for the tin.
→ Neat work is guaranteed – the Can Opener with pliers grip does not come into contact with the food.
→ Almost completely manufactured in robust 18/10 stainless steel – durable, hygienic and easy to clean.
→ Hanging Ring for easy storage – ready to hand in RÖSLE's Open Kitchen.

1. Close-up of the Can Opener with pliers grip

1 2 3 4 5 6

1. Hanging Ring
2. Handles
3. Thumb-screw
4. Transport wheel (below thumb-screw)
5. Cutting wheel
6. Lid lifter (pliers)

3. Use

Place the can on a fl at work surface. Open the handles.

Position the can opener onto the upper rim of the tin with the thumbscrew facing upward and the front piece pointing toward the center of the can. Slide the can opener into position.

Line drawing of a mechanical tool or tool with a circular component and handle (no text or symbols)

Press the handles together. The tin is now firmly held.

Turn the thumb-screw clockwise until one complete circle around the tin as been cut.

Technical line drawing of a mechanical clamp or tool with no visible text or symbols

Open the handles and lift away the can opener. The tin lid can now be lifted off by hand.

Alternatively the lid can be lifted off using the lid lifter (integrated pliers) that are positioned on the side.

Diagram showing a mechanical assembly with two cylindrical components connected by ropes, before and after a close-up of a wire loop (no text or symbols present)

4. Cleaning

Regular cleaning of the can opener is not necessary since it does not come into contact with can contents. However, it is advisable to check for food remnants after use each time. These can be removed with a washing-up brush under running water. After washing, dry the Can Opener with pliers grip well.

The Can Opener with pliers grip should never be put into a dishwasher for cleaning since the specially hardened steel of the cutting wheel may corrode under the influence of strong cleaning agents and this could lead to impaired function.

5. General Safety Guidelines

The Can Opener with pliers grip must not be used as a toy and should be handled with caution. Please keep out of the reach of children.

General Information and Warranty

This item is covered by the statutory warranty. The warranty applies to deficiencies of the article caused by a material and/or manufacturing defect. The statutory warranty period commences from the date shown on the invoice/receipt. Please keep your invoice/receipt in a safe place for proof of warranty.

In case of questions or doubts, please contact the merchant from whom you purchased the product.

Keep this instruction manual for future reference.

Service and Contact

For questions or suggestions, please use our contact form at www.roesle.com/service.

We wish you long lasting service from your new RÖSLE Kitchen Utensil.

Your RÖSLE-Team

Chère Cliente, cher Client RÖSLE,

Line drawing of a mechanical tool with a circular component and handle (no text or symbols)

Technical line drawing of a mechanical clamp or tool with circular base and handle (no text or symbols)

Diagram showing a mechanical assembly with two cylindrical components connected by ropes, before and after a close-up of a coiled cable (no text or symbols present)

4. Entretien