JL026079NPF - Lifebuoy JILONG - Free user manual and instructions

Product type	Lifebuoy
Brand	JILONG
Model	JL026079NPF
Article number	JL026079N / JL026079NPF
Number of users	1 (adult/child from 0 to 14 years)
Maximum load	80 kg
Safety distance from shore	10 meters
Buoyancy	Flotation stability, requires balancing effort
Inflation	Hand or foot pump recommended. Do not use high pressure air. Inflate all chambers completely.
Deflation	Open the valves and press on the inner rubber lining to release air.
Main material	PVC (plastic film)
Use	Pool only
Supervision	Always supervise children in the water. Designate a single person responsible for safety.
Safety	Does not protect against drowning. Reserved for swimmers. Prohibited for non-swimmers. Do not use in offshore wind or currents.
Assembly instructions	Installation by an adult, takes about 10 minutes. Choose flat ground without sharp objects.
Maintenance	Clean with clean water, dry in shade. Do not use acidic or alkaline detergent. Store indoors, avoid frost and direct sunlight exposure.
Repair	Repair patch provided for small punctures (up to 2.5 cm). For larger damage, use silicone or rubber glue.
Minimum storage temperature	5 °C
Estimated lifespan	Varies depending on maintenance, avoid prolonged sun exposure to extend lifespan.
Package contents	Buoy, repair patch (if applicable), user manual.

Frequently Asked Questions - JL026079NPF JILONG

What is the maximum weight supported by the JL026079NPF buoy?

The JILONG JL026079NPF buoy supports a maximum load of 80 kg. It is essential not to exceed this limit to ensure safety.

How many people can use this buoy at the same time?

This buoy is designed for 1 user (adult or child from 0 to 14 years). Do not use with multiple people.

Does the buoy protect against drowning?

No, the JILONG buoy does not protect against drowning. It is reserved for swimmers and requires constant adult supervision.

Where can I use this buoy?

Use is restricted to swimming pools only. Do not use at sea, in currents, or in offshore wind.

How to properly inflate the buoy?

Use a hand or foot pump. Inflate all air chambers slowly and completely. Do not use high pressure air and do not inflate by mouth.

How to maintain and clean the buoy?

Clean with clean water, dry in shade. Do not use acidic or alkaline detergent. Avoid direct sunlight exposure to extend its lifespan.

What to do in case of a leak or puncture?

For small holes (up to 2.5 cm), use the provided repair patch. For larger damage, apply silicone or rubber glue after cleaning.

How to store the buoy in winter?

Clean it, dry it, fold it into its original packaging and store it indoors. Avoid temperatures below 5 °C to prevent damage to the plastic.

Is the buoy suitable for children who cannot swim?

No, the product is reserved for swimmers. Children who cannot swim should not use it, even under supervision.

What dangers should be avoided during use?

Avoid sharp objects, jumping and diving, rough play. Never leave the buoy deflated. Supervise children at all times.

USER MANUAL JL026079NPF JILONG

Thank you for choosing the products manufactured by Jilong Company. Before using, please read the manual carefully and keep it with original package for future reference.

Definition

Warning

No protection against drowning

Design working pressure

Mandatory instruction

Swimmers only

Read instructions first

Max. load capacity

Fully inflate all air chambers

Always supervise children in water

Device provides floating stability

Device requires balancing

Pool use only

Numbers of users: adults/children

Safe distance to shore...m

Prohibition

Not for children ...years of age and below

Do not use in offshore current.

Do not use in offshore wind

See Table

Item No.
JL026079N/JL026079NPF	√	0.03	√		√	80kg	√		10m
JL037006N/JL037006NPF	√	0.03	√		√	80kg	√		10m
JL020249-1N/JL020249-1NPF	√	0.03	√		√	160kg	√
JL037113N/JL037113NPF	√	0.03	√		√	80kg	√
Item No.
JL026079N/JL026079NPF		√	1	0		√	√	0-14
JL037006N/JL037006NPF		√	1	0		√	√	0-14
JL020249-1N/JL020249-1NPF		√	2	0	√			0-14
JL037113N/JL037113NPF		√	1	0	√			0-14

SAFETY ADVICES:

1. Designate a person to be in charge of safety.
2. More supervision efforts are required when there are several persons inside the product.
3. If possible, teach your child to swim.
4. Wet the neck, arms and legs before child enter the water.
5. Prohibit running or active games on product edges.
6. The children not good at swimming or unattended must wear life vest.
7. Never put toys nearby and upside the unattended product.
8. Read the manual and follow the instructions relating to safety tips, correct and complete product.
9. For your own safety, always heed the advice and warnings in these instructions.
10. Teach the child the self-rescue actions.
11. Non-compliance with these operating instructions may expose you to serious danger. Only use the product in the places and conditions for which it is intended.
12. Not suitable for non-swimmers! Do not use if an offshore wind is blowing! Do not use in areas subject to currents! Does not protect against drowning! Do not swim under the frame! Do not jump unless the area is clear! Do not use in breaking waves! Do not leave the air tube deflated! Supervise children at all times.
13. When accident occurs: Pull the child out of water as early as possible. Change the wet clothes and cover the child with warm blanket. Ask for help and act awording to the method told to you.
14. Remember first-aid number and post it near the product.
15. Distribute the weight of load and accessories evenly so that the product use level fore to aft and side to side.

△,!WARNING! Keep away from fire. Do not use around sharp objects. Do not dive or jump.

USING INSTRUCTION:

1. Choose a flat ground make sure there are no stone, gravel, glass, and any other sharp and edgy objects.
2. Take out the product from package and check if any parts missing, unfold it on the ground, lay flat, locate and open inflation valve(s).
3. It is recommended that you use only a hand or foot pump for inflation.

Caution: Do not use the high-pressure air to inflate! Do not over-inflate! Never image to inflate the products with mouth, as it will be so much difficult.

1. Slowly Inflate all parts and accessories until full one by one. Close and press all valves tightly after inflation to firm and supportive.

CAUTION: It needs one adult to set up the product and it will let you quickly use the product within 10 minutes.

NOTE: When using this product, ensure that the valves are accessible to the user and remain out of the water.

1. After use, open and squeeze valves to release air, or insert a slim object such as a deflation tube to hold valve inner stopper open. Being careful not to puncture your product or force air out of product. Allow air to escape slowly and naturally.

STORAGE AND MAINTENANCE

Clean the product with clear water, then leave it in shady and cool place for airing, fold it into original package and place it indoor for next use.

Pay attention to the fact that no sharp edges are shaped in the plastic foil while folding up the item. In winner, the pool is not allowed to be placed at a temperature that is below 5\ ^ircC , otherwise the plastic film would be damaged.

Caution: Do not use the alkali or acid detergent to clean product! Do not leave product exposed under sunlight directly because it will shorten the using-life of product.

WARNING: Noncompliance of the maintenance rules may result in serious hazards for health and especially for the children.

Repair Patch Instructions

(Small pinhole and small puncture leaks can be repaired with the included repair patch)

a) Locate the leak place.
b) Deflate the air.
c) Clean the area surrounding the leakage and wipe up all water from the surface.
d) Take out the repair patch, cut it into required shape and size, which should be litter larger than the leaking area, put the patch on leaking area and press firmly.
e) You can use it again after 24 hours drying of the repaired position.

If the damage is bigger than 1" (2.5cm), we recommend using a Silicone or rubber based glue for repair.

Please read warning statement on glue prior to use.

Shanghai Jilong Plastic Products Co. Ltd.

No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China

Tel: [phone] E-mail: [e-mail] Web: www.jilong.com

Mode d'emploi

Shanghai Jilong Plastic Products Co. Ltd.

No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China

Tel: [phone] E-mail: [e-mail] Web: www.jilong.com

15649-124-D(V1)

Bedienungsanleitung

Shanghai Jilong Plastic Products Co. Ltd.

No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China

Tel: [phone] E-mail: [e-mail] Web: www.jilong.com

Manuale

Shanghai Jilong Plastic Products Co. Ltd.

No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China

Tel: [phone] E-mail: [e-mail] Web: www.jilong.com

Handleiding

Shanghai Jilong Plastic Products Co. Ltd.

No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China

Tel: [phone] E-mail: [e-mail] Web: www.jilong.com