OLC-200 - Unknown JILONG - Free user manual and instructions
Find the device manual for free OLC-200 JILONG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Pocket Scale |
| Brand | JILONG |
| Model | OLC-200 |
| Maximum Weight Capacity | 200 g |
| Readability | 0.1 g |
| Dimensions (W x D x H) | 120 x 100 x 20 mm |
| Weight | 200 g |
| Power Supply | 2 x AAA batteries (included) |
| Display | LCD display with backlight |
| Units of Measurement | g, oz, ct, gn |
| Tare Function | Yes |
| Auto-Off | Yes, after 60 seconds of inactivity |
| Low Battery Indicator | Yes |
| Surface | Stainless steel platform |
| Cleaning | Wipe with a soft, dry cloth |
| Safety Precautions | Do not overload; keep away from moisture |
| Replaceable Parts | Batteries |
| Repairability | Battery compartment accessible |
| Manual Format | PDF download available |
Frequently Asked Questions - OLC-200 JILONG
How do I change the unit of measurement on the JILONG OLC-200?
Press the MODE button repeatedly to cycle through the available units: g, oz, ct, and gn. The selected unit will appear on the LCD display.
How do I use the tare function?
Place the container on the scale and wait for the reading to stabilize. Press TARE to reset the display to zero. Then add the item to be weighed; the scale will show only the net weight.
What is the maximum weight I can measure?
The JILONG OLC-200 has a maximum capacity of 200 g. Do not place more than this weight on the platform to avoid damaging the sensor.
Why does the scale turn off automatically?
The scale features an auto-off function to conserve battery. If the scale is inactive for about 60 seconds, it will shut off automatically. Press any button to turn it back on.
How should I clean the scale?
Use a soft, dry cloth to wipe the stainless steel platform and the housing. Avoid using abrasive cleaners or submerging the scale in water.
What batteries does the OLC-200 use?
The scale runs on two AAA batteries, which are included in the package. When the low battery indicator appears, replace them with new ones.
How do I zero the scale?
If the scale does not read zero when empty, press the ZERO/TARE button. This will calibrate the zero point so that subsequent measurements are accurate.
Is the OLC-200 scale accurate?
Yes, the scale offers a readability of 0.1 g within its 200 g capacity. For best accuracy, ensure the scale is on a flat, stable surface and has been zeroed before use.
How do I calibrate the scale?
If you suspect the scale is not weighing correctly, you can calibrate it using a standard weight. Turn on the scale, wait for it to read zero, then press and hold the MODE button until the display shows CAL. Place a known weight (e.g., 100 g) on the platform and wait for the calibration to complete.
What does "ERR" mean on the display?
The "ERR" message indicates an overload condition. Remove the excessive weight immediately. Avoid exceeding 200 g to prevent permanent damage to the scale.
User questions about OLC-200 JILONG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Unknown in PDF format for free! Find your manual OLC-200 - JILONG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OLC-200 by JILONG.
USER MANUAL OLC-200 JILONG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JILONG
Model : OLC-200
Category : Unknown