SS 4048 - Shaver SINBO - Free user manual and instructions
Find the device manual for free SS 4048 SINBO in PDF.
Frequently Asked Questions - SS 4048 SINBO
Download the instructions for your Shaver in PDF format for free! Find your manual SS 4048 - SINBO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SS 4048 by SINBO.
USER MANUAL SS 4048 SINBO
INSTRUCTION MANUAL INTRODUCTION Thank you for purchasing the Sinbo Cordless Rechargeable Shaver. Your shaver features contoured shaving heads which can provide you with a flawlessly smooth, clean shave. Please read this manual first before using this device in order to get best results. Included With Your Device - One 3 Head Rotary Shaver - One Charging Power Cord - One Cleaning Brush - User’s Manual with Warranty Information PARTS DESCRIPTION
1. Blade, 2. Head Release Button, 3. Body, 4. ON/OFF Switch, 5. LED Indicator, 6. Outer
- 3 flexible blades with movable heads
- Exclusive design fitting the contours
- Ideal trimmer for sideburns and moustache
- 40 minutes of operation
- 8 hours charge duration
- Accessories: Cleaning brush
- AC220-240, 50/60Hz, 3W Included with your shaver is a charging power cord which you can use to charge your shavers internal rechargeable battery. To do so, follow the steps below:
1. Make sure that the ON/OFF Switch on your shaver is in the OFF position.
2. Connect one end of the charging power cord into the appropriate charging port on
your shaver, and connect the other end to an AC power outlet.
3. Once plugged in, the LED light on your shaver will illuminate, indicating that it is
4. Before using your shaver for the first time, charge the battery for a full 12 hours. All- 7 -
subsequent charges will only require charging the battery for 7-10 hours. NOTE: Once your shaver is fully charged, it can be used for about 7 days without having to be recharged. In order to best preserve the battery of your shaver, only charge it when it is completely drained of power, and avoid keeping it charged. Using Your Shaver In order to use your shaver to get a close shave, follow the steps below:
1. Remove the Protective Cover, and make sure your skin is dry for best results.
2. Slide the ON/OFF Switch on your shaver to the ON position.
3. Glide your shaver over your face with one hand, and use your other hand to keep the
skin on your face stretched and taut.
4. Use both straight and circular motions for best results.
5. Your shaver has a built in trimmer. You can use this trimmer to cut harder to reach
sections of hair that you want to cut more carefully such as a beard or a moustache.
6. When finished shaving, slide the ON/OFF switch on your shaver to the OFF position.
MAINTENANCE In order to keep your shaver running smoothly, you should clean it regularly. To do so, use the included cleaning brush to remove hairs and other debris that may get caught in your shaver. Start by brushing the hairs and debris off of the outside of your shavers foil cover. Next, lift off the foil cover so that you can brush off any hairs or debris caught underneath it. To lift off the foil cover, press on the foil cover release button on your shaver and carefully lift off the cover. With the foil cover still removed, you can also brush off dirt and debris that may get stuck in the blades of your shaver. Disposal of waste batteries After batteries have been used up take them off and hand them over to an appointed recovery point. Don’t throw them away at random. Trimmer- 8 - WARNING Please adhere to the safety precautions below in order to use your shaver safely. Failure to follow these steps may shorten the lifespan of your shaver and possibly cause personal harm or injury.
- DO NOT immerse your shaver in water or fluids.
- DO NOT expose your shaver to excessive heat, flames, or direct sunlight.
- DO NOT allow the net-blades of your shaver to be exposed to sharp objects or objects that are hard. Doing so could damage the blades and cause serious abrasions to your skin.
- If your shaver becomes damaged, be sure to have it repaired at an authorized repair center. NEVER attempt to repair a damaged unit yourself, as doing so may put you at risk of electric shock.- 9 - FRANÇAIS
SGS-CSTC Safety Lab., Ningbo Branch 1-5/F., West of Building 4, Lingyun Industry Park, No.1177, Lingyun Road, Ningbo National Hi-Tech Zone, Ningbo, Zhejiang, China
ManualGo.com