Solo Grande 688405 - Grill plate CaterChef - Free user manual and instructions

USER MANUAL Solo Grande 688405 CaterChef

2. Stop is doorgebrand.

1. The upper and lower module plates are enameled and are easy to be cleaned.

2. Single and double grilling plates can be chosen freely.

3. Independent temperature controlling system are convenient to handle and can

achieve energy economy as well.

4. Internal temperature protector is reliable and safe.

5. Grilling temperature can be adjusted according to di󰀨erent requirements.

6. It is made by stainless steel and the drawer-style oil tray is also made of stainless

7. It is easy to lift up and down and convenient to handle and maintain.

688400-405-410-415-420-425_M20NE.indd 7688400-405-410-415-420-425_M20NE.indd 7 30-6-2020 09:32:0330-6-2020 09:32:03-8- 688400-405-410-415-420-25 M20NE B. . Transportation and Storage Please handle the grill carefully and cautiously in transportation and do not turn it up- side down to prevent any damage to the shell and interior. The packed grill should be stored in the storehouse ventilation and non-corrosive gas. Any weatherproof measu- res should be applied when temporary storage. C. Notes

1. The working voltage of the equipment should match that of the power supply.

2. Suitable switch, fuse breaker and socket should be installed near the equipment.

3. Before using user should check whether connection is rm and voltage is regular.

4. Do not put any object onto the upper module plate and shake the lift operation

handle with sudden force.

5. Cut o󰀨 power supply while cleaning. Do not use wet towel with corrosive cleanser

and do not directly splash water on the equipment.

6. The adjustable temperature of the equipment is between 50~300 °C. It is recom-

mended that the average working temperature normally should be 200~250 °C.

7. Do not store any ammable objects near the equipment. The environment

temperature lower than 45 °C, the humidity is under 85%.

8. The installation and maintenance of the equipment should be made by professional

technicians. 688400-405-410-415-420-425_M20NE.indd 8688400-405-410-415-420-425_M20NE.indd 8 30-6-2020 09:32:0330-6-2020 09:32:03-9- 688400-405-410-415-420-25 M20NE Special Notes WARNING! This product is for professional use only. Do not dismantle and ret the machine. Do not lift the upper module plate with sudden force and tilted installation. The dismantlement and alteration can cause serious accident happens. Before cleaning, unplug the machine and cut o󰀨 power supply. Do not spray water directly to the product. Water can conduct electricity and electricity leakage happens. Do not pat the product and put heavy object onto the product. Incorrect operation can cause the equipment be damaged and dangerous. High temperature will cause scald. When the equipment is in use and before or after using it, do not touch the box and module plate because of high temperature. Do not use any power supply which is not coordinated with safety standards. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. NOTICE! When the thunderstorm is coming, the electricity supply must be cut o󰀨 soon. It will avoid the equipment being damaged in cause of lightning stroke. Do not destroy the control panel and the surface of the machine with hard or sharp things. When the machine nishes using, user should close main switch. The installation and maintenance of circuit must be done by certicated special professionals. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualied person in order to avoid a calamity. 688400-405-410-415-420-425_M20NE.indd 9688400-405-410-415-420-425_M20NE.indd 9 30-6-2020 09:32:0330-6-2020 09:32:03-10- 688400-405-410-415-420-25 M20NE D. Operation Instruction

1. Before using, check whether the power supply installation is regular to make sure

the supplied voltage is coordinated with the using one.

2. Put the plug in the socket and turn on the power.

3. Turn the temperature controller clockwise to the temperature needed. The yellow

indicator is on that shows heating wire begins to heat and the upper and lower griddle begins to raise temperature.

4. Temperature can be adjusted according to di󰀨erent food preferably within

180 °C ~ 250 °C. About 8 minutes is needed for the temperature to be raised to 250 °C from the power is on.

5. When the temperature reaches 250 °C, lift the upper module plate to a suitable

place by operation handle. Put some edible vegetable oil on the lower module plate and constantly place the food on it. Close the plates and press the handle lightly. Keep an eye on the food until it is suitably done.

6. When temperature reaches the setting degree, temperature controller can cut o󰀨

power supply automatically. At the same time, yellow indicator is o󰀨 and green indicator is on. It shows that electricity heating tube stops working for next turn.

7. At the lower front of the lower module is the oil tray. Substantial vegetable oil and

the animal oil from the meat grilled ow to the oil tray from the lower module plate.

8. Lift the upper module plate to take the sandwich and other food already done.

9. When the temperature is a bit lower, the temperature controller can get through

power supply automatically. The heating tubes restart to work to heat the module plates.

10. On completion of the work, temperature controller should be turned to the “o󰀨”

place. Unplug the equipment and cut o󰀨 the power.

11. Notice: There is temperature limiter in the bottom box, the action temperature is

130 °C, and reset temperature is <40 °C. When temperature is over the protective button works for protection. When use it again, please use it after press the protective button. E. Cleaning and Maintenance

1. Cut o󰀨 the power supply before cleaning in case of accident.

2. Do not use wet towel with non-corrosive cleanser to clean the module plate, the

surface of the equipment and power cord. Direct wash by water is not permitted in case of any damage of the functions.

3. If do not use it at any time, please turn o󰀨 temperature controller and main switch.

4. Please store the equipment in a ventilated storehouse without corrosive gas after

cleaning when ceasing its work for a long time. 688400-405-410-415-420-425_M20NE.indd 10688400-405-410-415-420-425_M20NE.indd 10 30-6-2020 09:32:0330-6-2020 09:32:03-11- 688400-405-410-415-420-25 M20NE F. Troubleshooting Troubles Causes Solutions

1. Module plates are out of heating

when the power and heating indicator are both on.

1. Temperature controller is broken.

2. At least one of heating wires is

3. Temperature protector works.

1. Change temperature controller.

2. Change the burned heating tube.

3. Dismantle the bottom plate and use

hand to reset temperature protector.

2. When the power is on and tempera-

ture controller is switched and hea- ting indicator is on and temperature can be not controlled.

1. Temperature controller is out of

3. Indicator is not on when the power

is on and the heating process is normal.

1. Indicator is broken. 1. Change temperature controller.

4. The indicator is out of order when

1. Abnormal power supply or cut-o󰀨

1. Check power supply and connection

to make power supply be normal.

branchement solide, voltage correct.