CA11051 - Cooker CONSTRUCTA - Free user manual and instructions
Find the device manual for free CA11051 CONSTRUCTA in PDF.
| Product type | Built-in electric hob (cooker) |
| Brand | Constructa |
| Model | CA11051 |
| Number of cooking zones | 4 electric plates |
| Maximum power | Approx. 7.2 kW (depending on model) |
| Supply voltage | 220-240 V, 50/60 Hz |
| Dimensions (W x D) | Approx. 58 x 51 cm (standard) |
| Weight | Approx. 8-12 kg (not specified) |
| Surface material | Enamel and stainless steel |
| Number of power levels | 6 or 9 positions depending on model |
| Residual heat function | Yes, allows finishing cooking after switching off |
| Residual heat indicator | Not mentioned (probably no) |
| Child safety | Not mentioned |
| Cleaning | Damp cloth, mild soap; do not use steam cleaner |
| Maintenance of cooking zones | Oil or apply a preservative after cleaning |
| Repairability | Constructa technical service; spare parts available |
| Warranty | According to conditions of the country of purchase; keep the proof of purchase |
| Installation | Built into a worktop; requires cutout |
| Usage | Household non-professional |
| Standards | European Directive 2002/96/EC (WEEE) |
Frequently Asked Questions - CA11051 CONSTRUCTA
User questions about CA11051 CONSTRUCTA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Cooker in PDF format for free! Find your manual CA11051 - CONSTRUCTA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CA11051 by CONSTRUCTA.
USER MANUAL CA11051 CONSTRUCTA
11Operating and assi
NL
Electric hotplates 12
Before using for the first time 12
Operation 12
Warnings for use 13
Cleaning and maintenance 14
Enamel surfaces 14
Stainless steel surfaces 14
Preventing damages 14
Technical Assistance Service 15
Warranty conditions 15
Packaging and old appliances 15
Disposing in an environmentally-responsible manner ... 15
Hob installation 16
Safety precautions 16
Before installing 16
Preparing the kitchen unit 17
Hob installation 17
Hob connection 17
Removal of cooking hob 18
Important notes
Read these instructions carefully. Reading these instructions will enable you to use yopur appliance safely and effectively.
These operating instructions should be retained, and passed onto the owner if the appliance is sold.
The manufacturer is exempt from all responsibility resulting from non-compliance with the requirements of this manual.
Safety precautions
All installation and connection operations must be carried out by an authorised technician, in line with legal regulations and guidelines in force in the country, and local electricity providers' guidelines. It is recommended that you call our Technical Assistance Service for any of these jobs.
This appliance has been designed for home use only.
Do not tamper with the appliance's interior. If necessary, call our Technical Assistance Service.
Do not switch on the appliance if it is damaged in any way. Contact our Technical Assistance Service.
The surfaces of cooking appliances heat up during use. Care must be taken when using these appliances. Keep out of the reach of children.
This appliance is only intended for cooking purposes, not as a heating system.
Fat or oil which is overheated can catch fire easily. Never leave fat or oil to heat up unattended. If it does catch fire, never use water to put the fire out. Risk of burns! Put the fire out by covering the pan with a lid and switch off the hotplate.
In the event of a malfunction, switch off the appliance's power supply. For repairs, call our Technical Assistance Service.
Do not clean the appliance using steam cleaners. Risk of electrocution!
The graphics in this instruction manual are given as a guide only.
Electric hotplates
Before using for the first time
To remove the new smell, switch the hotplates on to full power for five minutes, one by one, without placing any pans on top. Do not switch more than one hotplate on at a time. At this point it is normal to notice smoke and odours, but these will disappear over time.
Caution! Do not operate the hotplates without placing pans on top, except during this initial heating phase.
Operation
Switching on
Turn the knob anticlockwise to the required setting. Fig. 1 or 2 depending on the model.
Setting 1: low power.
Setting 6 or 9 (depending on the model): full power
Switching off
Turn the knob clockwise to the off setting.
Tip It is recommended to start cooking on full power and then to use intermediate power levels after a few minutes.
Residual heat
The electric hotplates can be switched off slightly before the end of the cooking time. The residual heat will enable you to continue cooking for several minutes, thus saving energy.
Suggestions
The following suggestions are intended as a guide only. Increase the power for:
large quantities of liquid,
preparing large quantities of food,
using pans without lids.
| Power (6 settings) | Power (9 settings) | |
| Melting: chocolate, butter, gelatin 1 - 2 1 - 2 | ||
| Cooking: rice, béchamel sauce, ragout 1 - 2 2 - 3 | ||
| Cooking: potatoes, pasta, vegetables 2 - 3 4 - 5 | ||
| Searing: stews, roast joints 2 - 3 4 - 5 | ||
| Steaming: fish 3 5 | ||
| Heating, warming: ready meals 3 - 4 2 - 3 - 4 - 5 | ||
| Grilling: cutlets, steaks, omelettes 4 - 5 6 - 7 - 8 | ||
| Cooking and browning 6 9 |
Warnings for use
The following advice is intended to help you save energy and prevent cookware damage. Fig. 3:
Use pans which are suitably sized for the hotplate. The diameter of the base of the pan should match that of the hotplate, and should not be smaller.
Use a pan with thick flat base.
- Do not use damaged cookware, which does not sit evenly on the hotplate.
- Place the pan in the centre of the hotplate. Otherwise it could be overturned.
Always use the pan lids when cooking.
- Do not strike the hob and do not place excessive weight on it.
Pans should be placed on the hob carefully.
- Do not cover the hob with aluminium foil or similar products hen cooking. This could damage the hob.
- Do not allow liquids to boil over onto the hob and hotplates. Use deep pans when cooking with large quantities of liquid.
The hob must be kept dry. Salt water and wet pans can damage the hob. Do not cook with wet pans.
Cleaning and maintenance
Any food which spills onto the hob must be cleaned off immediately with a dishcloth.
The hotplates should be cleaned with soap and water.
Dry the hob. Moisture may cause the hotplates to rust over time. Wet hotplates should be dried quickly.
To protect the surface of the hotplates, treat them using an oil or other protective product available on the market.
The edges of the hotplates may turn slightly yellow with use. This is normal. Clean the edges using a stainless steel cleaner.
Enamel surfaces
Clean the cooking hob using a damp cloth.
Do not use a abrasive cleaning products or scouring sponges. This could cause the hob to lose its shine.
Stainless steel surfaces
Over time, bluish or yellowish stains may appear on the hob and around the edges of the hotplates. Use stainless steel cleaners.
Do not use abrasive cleaning products.
Preventing damages
The hob must be kept dry. Salt water and wet pans can damage the hob.
Technical Assistance Service
When contacting our Technical Assistance Service, please provide the product number (E-Nr.) and production number (FD) of the appliance. This information is given on the specifications plate of the appliance and can be found on the sticker in the instruction manual.
Warranty conditions
The applicable warranty conditions are those set out by the company's representative office in the country of prurchase. Detailed information is available from retail outlets.
Proof of purchase must be presented to obtain the benefits of the warranty.
We reserve the right to introduce changes.
Packaging and old appliances
If the symbol appears on the specifications plate, follow these instructions:
Disposing in an environmentally-responsible manner
Unpack the appliance and dispose of the packaging in an environmentally-responsible manner.
This appliance is labelled in accordance with the European Directive 2002/96/EC concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable.
Hob installation
These instructions must be read carefully before proceeding to install the appliance.
The manufacturer is exempt from all responsibility resulting from non-compliance with the requirements of this manual.
Safety precautions
All installation and connection operations must be carried out by an authorised technician, in line with legal regulations and guidelines in force in the country, and local electricity providers' guidelines. It is recommended that you call our Technical Assistance Service for any of these jobs.
This appliance has been designed for home use only.
Before you begin, turn off the appliance's electricity supply.
The appliance's electrical connection cables must not be in contact with the hot parts of the hob. This could cause damageto the cable insulation.
Appliances with any electrical component must be earthed.
Do not tamper with the appliance's interior. If necessary, call our Technical Assistance Service.
Before installing
The units next to the appliance must be made of nonflammable materials. The laminated covering and glue for adhering it must be heat resistant.
This appliance cannot be installed on fridges, washing machines, dishwashers or similar.
If there is a drawer underneath the appliance, it must not contain temperature sensitive or easily inflammable objects, e. g. aerosols or shoe polish. Only use heat-resistant drawers.
An oven must have power ventilation to install a hob above it. Check the oven's dimensions in its installation manual.
Preparing the kitchen unit
Make the appropriate size cut in the work surface. Fig. 4. If there is no oven below the cooking hob, place a non-inflammable separator (e.g. metal or plywood) 10mm from the bottom of the cooking hob. This will prevent access to the base of the hob.
On wood work surfaces varnish the cutting surfaces with a special glue. This protects them from water vapour which could collect under the work surface.
Hob installation
The adhesive joint prevents water seepage. If it is factory installed (depending on model), do not move it. If it is not factory installed, adhere the joint supplied on the underside of the cooking hob. Fig. 6.
Remove the clamps from the bag provided. Gently screw the clamps into the holes indicated. Fig. 7.
- Insert the cooking hob. Press the sides of the hob until it is supported around its entire perimeter. Center it in the insertion space. Fig. 8.
- Turn the clamps and proceed in reverse order to the installation. Fig. 9.
Electrical connection
- Check that the power and voltage of the appliance given on the specifications plate are compatible with the electrical installation.
The cooking hobs are supplied with a power cable with or without a wall socket plug.
Appliances with plugs must only be connected to sockets that have earth wires correctly installed.
- Provide an omnipolar cut-off switch with a minimum contact separation of 3mm (except in plug connections, so long as the user has access to it).
This appliance is type "Y": The entrance cable can only be changed by the Technical Assistance Service, and not by the user. The cable type and minimum section must be respected.
The hob is fitted with a 6 × 1,5mm^2 electrical cable made of silicone suitable for a 220-230V, 2 phase connection. For any other connection, see figure 5.
For safety reasons, the earthwire must be the first to connect, and the last to disconnect.
Removal of cooking hob
Turn off the appliance's electricity supply.
- Unscrew the clamps and proceed in reverse order to the installation.
Belangrike opmerkingen 2
Service Technique 33
Conditions de garantie 33
