EHG9830 - Cooker ELECTROLUX - Free user manual and instructions

USER MANUAL EHG9830 ELECTROLUX

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Welcome to Electrolux. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www.electrolux.com Register your product for better service: www.electrolux.com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model, PNC, Serial Number. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice.

www.electrolux.com1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes in- juries and damages. Always keep the instructions with the appliance for future reference.

1.1 Children and vulnerable people safety

WARNING! Risk of suffocation, injury or permanent disability.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised by an adult or a per- son who is responsible for their safety.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot.

• If the appliance has a child safety device, we recom- mend that you activate it.

• Cleaning and user maintenance shall not be made by children without supervision.

• The appliance and its accessible parts become hot during use. Do not touch the heating elements.

• Do not operate the appliance by means of an external timer or separate remote-control system.

• Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. ENGLISH 3• Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.

• Do not store items on the cooking surfaces.

• Do not use a steam cleaner to clean the appliance.

• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.

SAFETY INSTRUCTIONS This appliance is suitable for the following markets: DZ

WARNING! Only a qualified person must in- stall this appliance.

• Remove all the packaging.

• Do not install or use a damaged appli- ance.

• Obey the installation instruction sup- plied with the appliance.

• Keep the minimum distance from the other appliances and units.

• Always be careful when you move the appliance because it is heavy. Always wear safety gloves.

• Seal the cut surfaces with a sealant to prevent moisture to cause swelling.

• Protect the bottom of the appliance from steam and moisture.

• Do not install the appliance adjacent to a door or under a window. This pre- vents hot cookware to fall from the ap- pliance when the door or the window is opened.

• If the appliance is installed above draw- ers make sure that the space, between the bottom of the appliance and the up- per drawer, is sufficient for air circula- tion.

• The bottom of the appliance can get hot. We recommend to install a non- combustile separation panel under the appliance to prevent access to the bot- tom. Electrical connection WARNING! Risk of fire and electrical shock.

• All electrical connections must be made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make sure that the appliance is disconnected from the power supply.

• Make sure the mains cable or plug (if applicable) does not touch the hot ap- pliance or hot cookware, when you connect the appliance to the near sock- ets

• Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.

• Make sure that a shock protection is in- stalled.

• Use the strain relief clamp on cable.

• Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact the Service or an electrician to change a damaged mains cable.

• The electrical installation must have an isolation device which lets you discon-

www.electrolux.comnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. Gas connection

• All gas connections should be made by a qualified person.

• Make sure that there is air circulation around the appliance.

• The information about the gas supply is on the rating plate.

• This appliance is not connected to a device, which evacuates the products of combustion. Make sure to connect the appliance according to current in- stallation regulations. Pay attention to requirements regarding adequate venti- lation.

WARNING! Risk of injury, burns or electric shock.

• Use this appliance in a household envi- ronment.

• Do not change the specification of this appliance.

• Do not use an external timer or a sepa- rate remote-control system to operate the appliance.

• Do not let the appliance stay unatten- ded during operation.

• Do not operate the appliance with wet hands or when it has contact with wa- ter.

• Do not put cutlery or saucepan lids on the cooking zones. They become hot.

• Set the cooking zone to “off” after use.

• Do not use the appliance as a work or as a storage surface. WARNING! Risk of fire or explosion.

• Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.

• The vapours that very hot oil releases can cause spontaneous combustion.

• Used oil, that can contain food rem- nants, can cause fire at a lower temper- ature than oil used for the first time.

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

• Do not try to extinguish a fire with wa- ter. Disconnect the appliance and cover the flame with a lid or a fire blanket. WARNING! Risk of damage to the appliance.

• Do not keep hot cookware on the con- trol panel.

• Do not let cookware to boil dry.

• Do not let cookware cool down on the hotplate.

• Do not activate the cooking zones with empty cookware or without cookware.

• Do not put aluminium foil on the appli- ance.

• Do not let acid liquids, for example vin- egar, lemon juice or limescale remover touch the hob. This can cause matt patches.

• Provide good ventilation in the room where the appliance is installed.

• Make sure that the ventilation openings are not blocked.

• Use only stable cookware with the cor- rect shape and diameter larger than the dimensions of the burners. There is a risk of overheating and rupture of the glass plate (if applicable).

• Make sure the flame does not go out when you quickly turn the knob from the maximum to the minimum position.

• Make sure pots are centrally positioned on the rings and do not stick out over edges of the cooking surface.

• Use only the accessories supplied with the appliance.

• Do not install a flame diffuser on the burner.

2.3 Care and Cleaning

WARNING! Risk of damage to the appliance. ENGLISH 5• Clean regularly the appliance to prevent the deterioration of the surface material.

• Do not use water spray and steam to clean the appliance.

• Do not clean the burners in the dish- washer.

• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal ob- jects.

WARNING! Risk of injury or suffocation.

• Contact your municipal authority for in- formation on how to discard the appli- ance correctly.

• Disconnect the appliance from the mains supply.

• Cut off the mains cable and discard it.

• Flat the external gas pipes.

Symbol Description no gas supply / off position ignition position / maximum gas supply Symbol Description minimum gas supply

WARNING! Refer to the Safety chapters.

www.electrolux.com4.1 Ignition of the burner WARNING! Be very careful when you use open fire in kitchen environment. Manufacturer decline any respon- sibility in case misuse of the flame Always light the burner before you put cookware. To light the burner:

Turn the control knob counterclock- wise to the maximum position ( ) and push it down.

Keep the control knob pushed for ap- proximately 5 seconds; this will let thermocouple to warm up. If not, the gas supply will be interrupted.

Adjust the flame after it is regular. If after some tries the burner does not light, check if the crown and its cap are in correct positions.

Thermocouple WARNING! Do not keep the control knob pushed for more than 15 sec- onds. If the burner does not light after 15 seconds, release the control knob, turn it into off position and try to light the burner again after minimum 1 minute. In the absence of electricity you can ignite the burner without elec- trical device; in this case approach the burner with a flame, push the relevant knob down and turn it counter-clockwise to maximum gas release position. If the burner accidentally goes out, turn the control knob to the off position and try to light the burner again after minimum 1 minute. The spark generator can start au- tomatically when you switch on the mains, after installation or a power cut. It is normal.

4.2 Turning the burner off

To put the flame out, turn the knob to the symbol

ENGLISH 7WARNING! Always turn the flame down or switch it off before you remove the pans from the burner.

5. HELPFUL HINTS AND TIPS

WARNING! Refer to the Safety chapters.

• If possible, always put the lids on the pans.

• When the liquid starts to boil, turn down the flame to barely simmer the liquid. Use cookware with diameters applicable to the size of burners. Burner Diameters of cook- ware Triple Crown

Rapid 180 - 260 mm Semi-rapid 120 - 220 mm Auxiliary 80 - 160 mm WARNING! Make sure that the bottoms of pots do not stand above the con- trol knobs. If the control knobs are under the bottoms of pots, the flame heats them up. Do not put the same pan on two burners. WARNING! Make sure that pot handles is not above the front edge of the cook- top. Make sure that pots are cen- trally put on the rings in order to get maximum stability and to get lower gas consumption. Do not put unstable or damaged pots on the rings to prevent from spill and injury. WARNING! Do not use a flame diffuser.

6. CARE AND CLEANING

WARNING! Refer to the Safety chapters. WARNING! Deactivate the appliance and let it cool down before you clean it. Disconnect the appliance from the electrical supply before you do cleaning or maintenance work. Scratches or dark stains on the surface have no effect on how the appliance operates.

• You can remove the pan supports to easily clean the hob.

• To clean the enamelled parts, cap and crown, wash them with warm soapy water and dry them carefully before you put them back.

• Wash stainless steel parts with water, and then dry them with a soft cloth.

www.electrolux.com• The pan supports are not dishwasher proof. They must be washed by hand.

• When you wash the pan supports by hand, take care when you dry them as the enamelling process occasionally leaves rough edges. If necessary, re- move stubborn stains using a paste cleaner.

• Make sure you position the pan sup- ports correctly after cleaning.

• To make the burners work correctly, make sure that the arms of the pan supports are in the centre of the burner.

Be very careful when you replace the pan supports to prevent the hob top from damage. After cleaning, dry the appliance with a soft cloth. Removing the dirt:

– Remove immediately: melting plastic, plastic foil, and food con- taining sugar.

Stop the appliance and let it cool down before you clean: lime- scale rings, water rings, fat stains, shiny metallic discolorations. Use a special cleaner applicable for sur- face of hob.

Clean the appliance with a damp cloth and some detergent.

At the end rub the appliance dry with a clean cloth. The stainless steel can become tarnished if it is too much heated. Refer to this you must not cook with potstones, earthen- ware pans or cast iron plates. Do not use aluminium foil to prevent damage the top during operation.

6.1 Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle with a metal electrode. Keep these components well clean to prevent difficult lighting and check that the burner crown holes are not obstructed.

6.2 Periodic maintenance

Periodically speak your local Service Force Centre to check the conditions of the gas supply pipe and the pressure ad- juster, if fitted.

Problem Possible cause Remedy There is no spark when lighting the gas

• There is no electrical supply

• Make sure that the unit is connected and the electrical supply is switched on.

• Control the fuse. If the fuse is released more than one time, refer to a qualified electrician.

• Burner cap and crown are placed uneven

• Make sure that the burner cap and crown are in correct positions. The flame is blow out im- mediately after ignition

• Thermocouple is not heated sufficient

• After lightning the flame, keep the knob pushed for approxi- mately 5 seconds. ENGLISH 9Problem Possible cause Remedy The gas ring burns un- evenly

• Burner crown is blocked with food resi- dues

• Make sure that the in- jector is not blocked and the burner crown is clear of food parti- cles. If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, speak your dealer or the local Service Force Centre. If you operated the appliance in- correctly, or the installation was not carried out by a registered en- gineer, the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period. These data are necessary to help you quickly and correctly. These data are available on the supplied rating plate.

• Serial Number (S.N.) ................. Use the original spare parts only. They are available at Service Force Centre and ap- proved spare parts shops.

7.1 Labels supplied with the

accessories bag Stick the adhesive labels as indicated be- low: MOD. PROD.NO. SER.NO DATA MOD. PROD.NO. SER.NO DATA MODELMODEL MOD. PROD.NO.SER.NO.03 ITMADE IN ITALY TYPE 230V-50Hz IP20

Stick it on Guarantee Card and send this part

Stick it on Guarantee Card and keep this part

Stick it on instruction booklet

WARNING! Refer to the Safety chapters.

www.electrolux.comWARNING! The following instructions about installation, connection and main- tenance must be carried out by qualified personnel in compliance with standards and local regula- tions in force.

Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If you use flexible metallic pipes, be careful they do not come in touch with mobile parts or they are not squeezed. Also be careful when the hob is put together with an oven. Make sure that the gas supply pressure of the appliance obeys the recommended values. The ad- justable connection is fixed to the comprehensive ramp by means of a threaded nut G 1/2". Screw the parts without force, adjust the connection in the necessary direc- tion and tighten everything. ABC

End of shaft with nut

Elbow Liquid gas Use the rubber pipe holder for liquid gas. Always engage the gasket. Then continue with the gas connection. The flexible pipe is prepared for apply when: – it can not get hot more than room tem- perature, higher than 30°C; – it is no longer than 1500 mm; – it shows no throttles; – it is not subject to traction or torsion; – it does not get in touch with cutting edges or corners; – it can be easily examined in order to make sure its condition. The control of preservation of the flexible pipe consists in checking that: – it does not show cracks, cuts, marks of burnings on the two ends and on its full length; – the material is not hardened, but shows its correct elasticity; – the fastening clamps are not rusted; –expired term is not due. If one or more defects are visible, do not repair the pipe, but replace it. When installation is complete, make sure that the seal of each pipe fitting is correct. Use a soapy solution, not a flame!

Remove the pan supports.

Remove the caps and crowns of the burner.

With a socket spanner 7 remove the injectors and replace them with the ones which are necessary for the type of gas you use (see table in "Techni- cal Information" chapter).

Assemble the parts, follow the same procedure backwards.

Replace the rating plate (it is near the gas supply pipe) with the one for the new type of gas supply. You can find this plate in the package supplied with the appliance. If the supply gas pressure is changeable or different from the necessary pressure, you must fit an applicable pressure ad- juster on the gas supply pipe.

8.3 Adjustment of minimum level

To adjust the minimum level of the burn- ers:

With a thin screwdriver, adjust the by- pass screw position. ENGLISH 11A

• If you change from natural gas G20 20 mbar to liquid gas, fully tighten the by- pass screw in.

• If you change from liquid gas to natural gas G20 20 mbar, undo the by-pass screw approximately 1/4 of a turn (1/2 of a turn for Triple Crown burner). WARNING! Make sure the flame does not go out when you quickly turn the knob from the maximum position to the minimum position.

8.4 Electrical connection

• Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply.

• This appliance is supplied with a mains cable. It has to be supplied with a cor- rect plug which can hold the load that the rating plate rates. Make sure that you install the plug in a correct socket.

• Always use a correctly installed shock- proof socket.

• Make sure that there is an access to the mains plug after the installation.

• Do not pull the mains cable to discon- nect the appliance. Always pull the mains plug.

• There is a risk of fire when the appli- ance is in connection with an extension cable, an adapter or a multiple connec- tion. Make sure that the ground con- nection agrees with the standards and regulations.

• Do not let the power cable to heat up to a temperature higher than 90° C. Make sure that you connect the blue neu- tral cable to the terminal with a letter "N" on it. Connect the brown (or black) phase cable to the terminal which has a letter "L". Keep the phase cable connected at all times.

8.5 Replacement of the

connection cable To replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure that the cable section is applicable to the voltage and the working temperature. The yellow/green earth wire must be ap- proximately 2 cm longer than the brown (or black) phase wire.

supplied brackets CAUTION! Install the appliance only on a worktop with flat surface.

www.electrolux.com8.7 Possibilities for insertion Kitchen unit with door The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance intervention is necessary. min 20 mm(max 150 mm)30 mm60 mm

Space for connections Kitchen unit with oven The hob recess dimensions must obey the indication and the kitchen unit must be equipped with vents to let a continu- ous supply of air. The electrical connec- tion of the hob and the oven must be in- stalled separately for safety reasons and to let easy remove oven from the unit. 50 cm 360 cm 180 cm 120 cm

Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.