Satinelle Ice HP6491 - Epilator PHILIPS - Free user manual and instructions

USER MANUAL Satinelle Ice HP6491 PHILIPS

With your new Satinelle ICE you can remove unwanted hairs quickly, easily and effectively. The combination of the new ceramic epilating system with the contour-following skin cooler and the massaging system constitutes a revolution in epilation. Thanks to the natural numbing effect of ice and massaging, the new Satinelle ICE makes epilation more comfortable and less painful than ever. The result is a silky-smooth skin and a hair growth reduction of up to 50% , assuming you use the appliance regularly (every 4 weeks).

The Satinelle ICE is suitable for all body parts. Type HP6493 also comes with a skin cooler that has been specially developed for epilating sensitive areas (underarms, bikini line). These areas can be particularly sensitive to pain, which this special skin cooler helps to diminish.

The rapidly rotating epilating discs catch even the shortest hairs (down to 0.5 millimetre!) and pull them out by the roots. As a result, your skin stays smooth for up to four weeks and regrowth is soft and downy.

General description (fig. 1)

Insulating sleeve for skin cooler
Leg skin cooler with pivoting cooling head
Skin cooler for underarms and bikini line (HP6493 only)
DShaving head (HP6493 and HP6492 only)
E Protective cap of shaving head (HP6493 and HP6492 only)
Massaging element
Epilating head
Appliance
Adapter
Cleaning brush
Exfoliating body puff

Important

Read these instructions for use carefully before using the appliance and save them for future reference.

Check if the voltage indicated on the adapter corresponds to the local mains voltage before you connect the appliance.
Only use the appliance in combination with the adapter supplied.
Do not use the appliance if the adapter or the appliance itself is damaged.
If the adapter is damaged, always have it replaced by one of the original type in order to avoid a hazard.
- The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this will cause a hazardous situation.
- Keep the appliance and the adapter dry.
- Keep the appliance out of the reach of children.
- Do not expose the appliance to temperatures lower than 5^ C or higher than 35^ C .
To prevent damage and injuries, keep the running appliance away from your scalp hair, eyebrows, eyelashes, clothes, threads, cords, brushes etc.
Do not use the epilating head on irritated skin or skin with varicose veins, rashes, spots, moles (with hairs) or wounds without consulting your doctor first. People with a reduced immune response or people suffering from diabetes mellitus, Raynaud's disease or immunodeficiency should contact their doctor first.

Preparing for use

Freezing the skin cooler

1 Put the skin cooler WITHOUT the insulating sleeve in the freezer or freezing compartment ( ) at least 4 hours before you start epilating. When the fluid has turned completely blue, the skin cooler is ready for use.

Make sure the outside of the skin cooler is completely dry before you freeze it.

TIP: you can store the skin cooler in the freezer permanently.

Using the appliance

General information about epilation

• Epilation is easier just after taking a bath or shower. Make sure your skin is completely dry when you start epilating.
  When you use the appliance for the first time, we advise you to try it out on an area with only light hair growth to get accustomed to the epilation process.
  Before epilating longer hairs on sensitive skin areas, shorten them with a trimmer or a pair of scissors.
  DYour skin may become a little red and irritated the first few times you use the epilator. This phenomenon is absolutely normal and will quickly disappear. As you use the appliance more often, your skin will get used to epilation, skin irritation will decrease and regrowth will become thinner and softer. If the irritation has not disappeared within three days, we advise you to consult a doctor.
  We advise you to epilate before going to bed at night, as this will allow any skin irritation that may develop to diminish overnight.

Epilating with the leg skin cooler

Make sure your skin is clean, entirely dry and free from grease. Do not use any cream before you start epilating.

I Slide the insulating sleeve onto the skin cooler (fig. 2).

The insulating sleeve prevents an unpleasant sensation of coldness in your hand while using the appliance and keeps the skin cooler cold as long as possible.

Occasionally the pivoting cooling head may freeze onto the skin cooler and won't move when you take the skin cooler from the freezer. The pivoting cooling head will start pivoting again after you have passed it over your leg a few times.

2 Snap the appliance onto the skin cooler (fig. 3).
3 Insert the appliance plug into the bottom of the appliance and put the adapter in the wall socket.

4 Switch the appliance on by selecting the desired speed (fig. 4). Select speed I for areas with little hair growth and for areas where bones are located directly beneath the skin, such as knees and ankles. Select speed II for larger areas with stronger hair growth.
5 Stretch your skin with your free hand to make the hairs stand upright.
Place the appliance perpendicularly onto the skin with the epilating head pointing forward and move it against the direction of hair growth at a moderate speed (fig. 5).

Make sure both the epilating discs and the skin cooler are in proper contact with the skin. Press the appliance lightly onto the skin.

If you are not completely satisfied with the epilation result, try moving the epilator more slowly over your skin.
7 Use the tab on the bottom end of the appliance to remove the appliance from the skin cooler (fig. 6).

Epilating with the skin cooler for underarms and bikini line (HP6493 only).

The special skin cooler for the underarms and the bikini line reduces the number of active epilating discs. Combined with the large cooling surface, this skin cooler makes epilating sensitive areas less painful. You will get the best results when the hairs are not too long (max. 1 cm).

1 Slide the insulating sleeve onto the skin cooler (fig. 7).
2 Snap the appliance onto the skin cooler (fig. 8).
3 Switch the appliance on by selecting the desired speed (fig. 4). We advise you to use speed I.
4 To epilate the underam area, place one arm behind your head to stretch the skin and place the appliance perpendicular onto the skin with the hand of the other arm (fig. 9).

ENGLISH 10

5 To epilate the bikini line, stretch the skin with your free hand and place the appliance perpendicularly onto your skin, without exerting any pressure (fig. 10).
6 Move the appliance slowly across the skin against the direction of hair growth.
7 Use the tab on the bottom end of the appliance to remove the appliance from the skin cooler for underarms and bikini line (HP6493 only) (fig. 11).

Epilating without skin cooler

If you do not want to use the skin cooler, for instance because you have grown accustomed to the sensation of epilation, you can also use the appliance without the skin cooler.
Make sure that you place the epilator perpendicularly onto your skin and that you move it against the direction of hair growth.

Using the exfoliating body puff

Use the exfoliating body puff in the shower.

Regular massages with the puff may help to prevent ingrown hairs. Do not use the puff immediately before or after epilation.

Shaving (HP6493 and HP6492 only)

You can use the shaving head to shave sensitive body parts, such as your underarms and bikini line. With the shaving head you will obtain a smooth result in a comfortable and gentle way.

Make sure the appliance is switched off.
2 Remove the skin cooler
3 Remove the epilating head (fig. 12).

Press the release button (1) and move the epilating head in the direction of the arrow (2).

4 Place the shaving head on the appliance and press it onto the appliance until it snaps home ('click') (fig. 13).
5 Switch the appliance on by selecting speed II.
Place the shaving head onto your skin and move the appliance slowly and smoothly against the direction of hair growth, while pressing it lightly (fig. 14).

Cleaning and maintenance

Never rinse the adapter or the appliance itself with water.

Do not use any corrosive detergents, scouring pads or cloths, petrol, acetone etc. to clean the appliance.

Make sure the appliance is switched off and unplugged.
2 Remove the skin cooler from the appliance and slide the insulating sleeve off the skin cooler.
3 Clean the pivoting cooling head of the leg skin cooler with the brush supplied or with a moist cloth after each use.

Make sure the outside of the skin cooler is completely dry before freezing it again.

Cleaning the epilating head

Remove the epilating head (fig. 12).

Press the release button (1) and move the epilating head in the direction of the arrow (2).

2 Clean all accessible parts and the epilating discs with the brush (fig. 15).
3 For thorough cleaning you can remove the massaging element (fig. 16).
4 You can also clean the epilating head (not the appliance!) more thoroughly by rinsing it under the tap (fig. 17).

Never try to detach the epilating discs from the epilating head.

ENGLISH12

5 Place the epilating head on the appliance and press it onto the appliance until it snaps home ('click') (fig. 18).

The epilating head can only be fitted onto the appliance in one way.

Cleaning the shaving head (HP6493 and HP6492 only)

Clean the shaving head after every use.

Make sure the appliance is switched off and unplugged.
2 Remove the shaving unit by pulling it out of the shaving head (fig. 19).
Brush the hairs off the shaving unit and the shaving head. Make sure that you also brush away any hairs that have collected under the trimmers (fig. 20).
4 You can also rinse the shaving unit (not the appliance!) under the tap (fig. 21).
5 Put the shaving unit back into the shaving head and snap the shaving head back onto the appliance ('click') (fig. 22).

Do not exert pressure on the shaving foil to avoid damaging it.

6 Rub a drop of sewing machine oil onto the trimmers and shaving foil of the shaving unit twice a year.

Storage

Put the protective cap on the shaving head ('click') (fig. 23).
2 Store the appliance and the accessories in the pouch.

Replacement (HP6493 and HP6492 only)

If you use the shaving head several times a week, replace the shaving unit (type HP6193) after one or two years of use or if these parts are damaged.

Environment

Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment (fig. 24).

Guarantee & service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.

Troubleshooting

Problem	Cause	Solution
Reduced epilating performance.	The epilator is being moved in the wrong direction.	Move the appliance against the direction of hair growth.
	The epilating head is placed on the skin at the wrong angle.	Make sure you place the appliance perpendicularly onto the skin.
	The epilating head does not touch the skin.	Make sure both the epilating head and the skin cooler are in proper contact with your skin during epilation.
	The skin was moistened with water, or a cream or other skincare product was applied prior to epilation.	Make sure your skin is entirely dry and free from grease. Do not put any cream, body milk or other skincare product on your skin before you start epilating.
	The skin cooler for underarms and bikini line is on the appliance when you are epilating your legs.	Only use the leg skin cooler to epilate your legs.
The appliance does not work.	The socket to which the appliance is connected is not live.	Make sure the socket you use is live. If you are using a socket in a bathroom cabinet, you may need to switch on the light to activate the socket.
	The appliance is not switched on.	Make sure that the appliance is plugged in and switched on.
	The epilating head has not been attached correctly.	Place the epilating head on the appliance and press it onto the appliance until it snaps home ('click').
Skin irritation occurs.	You used the epilator for the first time or after a long period of disuse.	Some skin irritation may occur the first few times you use the appliance. This is absolutely normal and should quickly disappear. For tips to reduce skin irritation, see the first section of chapter 'Using the appliance'. Also make sure you keep the epilating head clean.
The skin cooler is not cold enough.	The skin cooler was not frozen long enough.	Put the skin cooler without the insulating sleeve in the freezer or freezing compartment (***) for at least 4 hours. When the colour of the fluid has changed from white to completely blue, the skin cooler is ready for use.
	The skin cooler was not put in the freezer or freezing compartment.	Put the skin cooler without the insulating sleeve in the freezer or freezing compartment (***) for at least 4 hours. Do not store the skin cooler in the refrigerator.
	The skin cooler does not touch the skin.	Make sure the skin cooler is always in proper contact with your skin during epilation.
The pivoting cooling head of the leg skin cooler doesn't move.	The pivoting cooling head is frozen.	Pass the skin cooler over your leg a few times to make it start pivoting again. Always make sure the outside of the skin cooler is completely dry before you freeze it.
The epilating head cannot be removed.	You are not moving the epilating head in the right direction.	Press the release button and move the epilating head in the direction of the arrow (fig. 11) to remove it.
The shaving head (HP6492 and HP6493 only) cannot be removed.	You are not moving the shaving head in the right direction.	Press the release button and move the shaving head in the direction of the arrow (fig. 11) to remove it.
Reduced shaving performance (HP6492 and HP6493 only).	The shaving head is dirty.	Switch the appliance off, unplug it and remove the shaving unit. Then clean the shaving unit with the cleaning brush supplied. Remove any hairs that may have got stuck under the trimmers.
Stronger skin imitation than usual after shaving (HP6492 and HP6493 only).	The shaving foil is damaged or worn.	Replace the shaving unit.

Introduction

nHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHnHn

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

1
2 nannnnn nn mnnnnnnn (19).

3 124
4
5 nnnnnaa n nn nnnnnaan (n 22).

sknllore to sponhj tne

---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---
---	---

音键：T

江

賊伊BV 豹(HP6193）SAH 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JWJ 1JW

韓建

1
J
L
L
L
L
L
L
L
L
L

jla

1 1
1
1
1

Satinelle ICE jgsjssb

.

JcIgAie aiee I 1s Satinelle ICE jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg Jg

HP6493 jIJI JIJI.
Satiine ICE jJ
Lull (aLLg. 111
Lus Ls
Lus
Lus
Lus
Lus
Lus
Lus
Lus
Lus
Lus
Lus
Lus

(1) k k + 2k .

3 1

a

HP6493 j1b) aIallg nn bbl abioil 1

HP6492 HP6493 jRb)

HP6492 HP6493 ）

sill yic

J 1

lg12 < 1

F

G

H

0

J

K

PLo

g Lg j 1 g j 1 g 1 1 1 1 1 1

1.

ylll llll llll gge aaggaaal gall gaoaagaaal gao

jglll juogj dlaibio jld

الله الله	الله	الله
الله الله	الله	الله
الله الله	الله	الله
الله الله	الله	الله
الله الله	الله	الله
الله الله	الله	الله
الله الله	الله	الله
الله الله	الله	الله
AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL	AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL Al	AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL AL (AL)	JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL JL (HP6493)

J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J 1 J

aLgK LgJy JyI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI yI

is

g 1000

oalol ool j 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

g 1

aagaae aee eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eae eao

aie aaiy aaiy aaiy aaiy

g 1

Lgawwogosj 10slaW Lgwnnss

j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j

1. iS i 1.0i

（）

Lai Lai

1

1

1g

(4) (2015, 2016)

1

(1)

1

（f）j

1

Lgao Lj J 1

(0 J) 1

1

1

ss sssssssssssssssssssssss

is

Jg L 1 Jg D g 2 1 1 1 1 1 1 1 1 1 1 1

g 1

山

o 1

iilw 40 jj yly ly jy jil y jil w d0 jj k jk jk jk

i j 1

1 1

（）gJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJgJg

s 1 1

Laiu gss

aL a

L 1

o 1

aJ 1

1 1

1. 二, 三, 四, 五, 六, 时, 时, 时, 时, 时, 时, 时, 时, 时, 时, 时, 时, 时, x,y S ,若 y = x^2 + 1 .

oLissjolld

J 1

J 1 J 1 J 1 J 1 J 1 J 1

sLds Lds Lss 45 s

alss j 45 g s aagg s oolaa lglj bgs alss j 45

a

ICE JiaLwJolal L 10000000000000000000000000000000000000000000000000000000000000000000000000

( j _i = 0^maiji _j = 0^icj^jjj _k = 1^ic_k^kk^jk^j( j) ^k)

HP6493 Jdo jn. sL a Lai ICE JILU (sbsj) wblio nssy sblaia bgs ywosr lirn 100

1111111111111111111111111111111111

(1)

siiis (HP6493 Jdo b) (HP6492 HP6493 Jdo b)

(HP6492, HP6493)

JluLo aeb

s

ok

A

B

C

D

E

F

G

H

1

J

K

· n = 1

s