190S7FB - Moniteur PHILIPS - Free user manual and instructions

USER MANUAL 190S7FB PHILIPS

Recycling Information for Customers

Waste Electrical and Electronic

• CE Declaration of Conformity

• Energy Star Declaration

• Federal Communications

Commission (FCC) Notice (U.S.

FCC Declaration of Conformity

• Commission Federale de la

Communication (FCC Declaration)

• EN 55022 Compliance (Czech

MIC Notice (South Korea Only)

• Polish Center for Testing and

Certification Notice

• North Europe (Nordic Countries)

Frequently Asked Questions (FAQs)

Regulatory Information

Model No: HNS7190T TCO'03 Information

The display you have just purchased carries the TCO'03 Displays label. This

means that your display is designed, manufactured and tested according to some

of the strictest quality and environmental requirements in the world. This makes for

a high performance product, designed with the user in focus that also minimizes the

impact on our natural environment.

Some of the features of the TCO'03 Display requirements.

● Good visual ergonomics and image quality in order to improve the working environment for the user and

to reduce sight and strain problems. Important parameters are luminance, contrast, resoluction,

reflectance, colour rendition and image stability.

● Energy-saving mode after a certain time-beneficial both for the user and the environment

● The product must be prepared for recycling and the manufacturer must have a certified environmental

management system such as EMAS or ISO 14 000

❍ chlorinated and brominated flame retardants and polymers

❍ heavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO Development in co-operation with

scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has

been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling

system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

file:///G|/CD MANUAL/813/190S7 NEW BASE(4-27)/190S7-2007/lcd/manual/FRENCH/190S7/safety/REGS/REGULAT.HTM（第 1／11 页）2007-4-27 19:04:51Regulatory Information

For more information, please visit

www.tcodevelopment.com

RETURN TO TOP OF THE PAGE Recycling Information for Customers

Philips establishes technically and economically viable objectives to optimize the environmental performance of

the organization's product, service and activities.

From the planning, design and production stages, Philips emphasizes the important of making products that

can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back

initiatives and recycling programs whenever possible, preferably in cooperation with competitors.

There is currently a system of recycling up and running in the European countries, such as The Netherlands,

Belgium, Norway, Sweden and Denmark.

In U.S.A., Philips Consumer Electronics North America has contributed funds for the Electronic Industries

Alliance (EIA) Electronics Recycling Project and state recycling initiatives for end-of-life electronics products

from household sources. In addition, the Northeast Recycling Council (NERC) - a multi-state non-profit

organization focused on promoting recycling market development - plans to implement a recycling program.

In Asia Pacific, Taiwan, the products can be taken back by Environment Protection Administration (EPA) to

follow the IT product recycling management process, detail can be found in web site www.epa.gov.tw

For help and service, please contact Consumers Information Center or F1rst Choice Contact Information

Center in each country or the following team of Environmental specialist can help.

Mr. WY Chen- Environment manager

Philips Multimedia Flat Display

RETURN TO TOP OF THE PAGE Waste Electrical and Electronic Equipment-WEEE Attention users in European Union private households

file:///G|/CD MANUAL/813/190S7 NEW BASE(4-27)/190S7-2007/lcd/manual/FRENCH/190S7/safety/REGS/REGULAT.HTM（第 2／11 页）2007-4-27 19:04:51Regulatory Information

This marking on the product or on its packaging illustrates that, under European Directive

2002/96/EG governing used electrical and electronic appliances, this product may not be disposed of with

normal household waste. You are responsible for disposal of this equipment through a designated waste

electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical

and electronic, contact your local government office, the waste disposal organization that serves your

household or the store at which you purchased the product.

RETURN TO TOP OF THE PAGE CE Declaration of Conformity

Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following

- EN60950-1:2001 (Safety requirement of Information Technology Equipment)

- EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)

- EN55024:1998 (Immunity requirement of Information Technology Equipment)

- EN61000-3-2:2000 (Limits for Harmonic Current Emission)

- EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker)

following provisions of directives applicable

- 73/23/EEC (Low Voltage Directive)

- 89/336/EEC (EMC Directive)

- 93/68/EEC (Amendment of EMC and Low Voltage Directive)

and is produced by a manufacturing organization on ISO9000 level.

The product also comply with the following standards

- ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for CRT Monitor)

- ISO13406-2 (Ergonomic requirement for Flat Panel Display)

- GS EK1-2000 (GS specification)

- prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display)

- MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields)

- TCO'99, TCO'03 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission,

TCO: Swedish Confederation of Professional Employees) for TCO versions

RETURN TO TOP OF THE PAGE Energy Star Declaration

This monitor is equipped with a function for saving energy which supports the VESA Display

Power Management Signaling (DPMS)

standard. This means that the monitor must be

connected to a computer which supports VESA DPMS. Time settings are adjusted from the

system unit by software.

VESA State LED Indicator Power Consumption

Normal operation ON (Active) Green < 34 W (typ.)

file:///G|/CD MANUAL/813/190S7 NEW BASE(4-27)/190S7-2007/lcd/manual/FRENCH/190S7/safety/REGS/REGULAT.HTM（第 3／11 页）2007-4-27 19:04:51Regulatory Information

OFF (Sleep) Amber < 1 W Switch Off Off < 1 W As an ENERGY STAR

Partner, PHILIPS has determined that this product meets

guidelines for energy efficiency.

We recommend you switch off the monitor when it is not in use for a long time.

RETURN TO TOP OF THE PAGE Federal Communications Commission (FCC) Notice (U.S. Only)

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Use only RF shielded cable with ferrite core that supplied with the monitor when connecting this monitor to a computer device .

If your RF shield cable without ferrite core, we recommend to contact with Philips Customer & Service center for more information.

To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive

FCC Declaration of Conformity

Declaration of Conformity for Products Marked with FCC Logo,

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

RETURN TO TOP OF THE PAGE Commission Federale de la Communication (FCC Declaration)

file:///G|/CD MANUAL/813/190S7 NEW BASE(4-27)/190S7-2007/lcd/manual/FRENCH/190S7/safety/REGS/REGULAT.HTM（第 5／11 页）2007-4-27 19:04:52Regulatory Information

RETURN TO TOP OF THE PAGE EN 55022 Compliance (Czech Republic Only)

RETURN TO TOP OF THE PAGE MIC Notice (South Korea Only)

Please note that this device has been approved for non-business purposes and may be used in any

environment, including residential areas.

RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All

equipment that works together (computer, monitor, printer, and so on) should have the same power supply

The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device

in the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply

socket, which should be located near the equipment and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of

standards PN-93/T-42107 and PN-89/E-06251.

file:///G|/CD MANUAL/813/190S7 NEW BASE(4-27)/190S7-2007/lcd/manual/FRENCH/190S7/safety/REGS/REGULAT.HTM（第 6／11 页）2007-4-27 19:04:52Regulatory Information

RETURN TO TOP OF THE PAGE North Europe (Nordic Countries) Information

file:///G|/CD MANUAL/813/190S7 NEW BASE(4-27)/190S7-2007/lcd/manual/FRENCH/190S7/safety/REGS/REGULAT.HTM（第 8／11 页）2007-4-27 19:04:52Regulatory Information

Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your

product to increase the amount of reusable materials and to minimize the amount to be disposed of.

Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.

(For customers in Canada and U.S.A.)

This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations.

For additional information on recycling contact www.eia.org (Consumer Education Initiative)

RETURN TO TOP OF THE PAGE Information for UK only

WARNING - THIS APPLIANCE MUST BE GROUNDING.

This apparatus is supplied with an approved moulded 13A

plug. To change a fuse in this type of plug proceed as

1. Remove fuse cover and fuse.

2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it

should be cut off and an appropriate 3-pin plug fitted in its

If the mains plug contains a fuse, this should have a value

of 5A. If a plug without a fuse is used, the fuse at the

distribution board should not be greater than 5A.

Note: The severed plug must be destroyed to avoid a

possible shock hazard should it be inserted into a 13A

How to connect a plug

The wires in the mains lead are coloured in accordance

with the following code:

BLUE - "NEUTRAL" ("N")

file:///G|/CD MANUAL/813/190S7 NEW BASE(4-27)/190S7-2007/lcd/manual/FRENCH/190S7/safety/REGS/REGULAT.HTM（第 9／11 页）2007-4-27 19:04:52Regulatory Information

1. The GREEN AND YELLOW wire must be connected to

the terminal in the plug which is marked with the letter "G"

or by the Ground symbol

or coloured GREEN or GREEN AND YELLOW.

2. The BLUE wire must be connected to the terminal which

is marked with the letter "N" or coloured BLACK.

3. The BROWN wire must be connected to the terminal

which marked with the letter "L" or coloured RED.

Before replacing the plug cover, make certain that the cord

grip is clamped over the sheath of the lead - not simply

over the three wires.

RETURN TO TOP OF THE PAGE China RoHS The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by

Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and LCD

monitor which are produced and sold for China market have to meet China RoHS request.

file:///G|/CD MANUAL/813/190S7 NEW BASE(4-27)/190S7-2007/lcd/manual/FRENCH/190S7/safety/REGS/REGULAT.HTM（第 10／11 页）2007-4-27 19:04:52Regulatory Information

6. Choisir "Display a list of all the drivers in a specific location, so you can select the driver

7. Choisir "Display a list of the known drivers for this device so that I can choose a specific

7. Choisir "Display a list of all the drivers in a specific location, so you can select the driver

Switzerland 02 2310 2116

Shevchenko street 32

Phone:(01)-8000 111001 (toll free)

MEXICO Consumer Information Centre

Col. Industrial Vallejo

Level 1, 65 Epping Rd

NEW ZEALAND Philips New Zealand Ltd.

Avenue Kawran Bazar C/A Dhaka-1215

CHINA SHANGHAI Rm 1007, Hongyun Building, No. 501 Wuning road,

Unit A, 10/F. Park Sun Building

254-D Dr. A Besant Road, Worli

CALCUTTA Customer Relation Centre

7 justice Chandra Madhab Road

INDONESIA Philips Group of Companies in Indonesia

Philips Authorised Service Center,

39, Garden Road, Saddar,

Authorized Philips Service Center

13F, No. 3-1 Yuan Qu St., Nan Gang Dist.,

THAILAND Philips Electronics (Thailand) Ltd.

26-28th floor, Thai Summit Tower

1768 New Petchburi Road

Khwaeng Bangkapi, Khet Huaykhwang

Consumer Electronics.