KLIK5C-SS - Universal remote control CHAMBERLAIN - Free user manual and instructions

USER MANUAL KLIK5C-SS CHAMBERLAIN

MODEL KLIK3C-SS MODEL KLIK5C-BK2

MODEL KLIK5C-SS UNIVERSAL REMOTE CONTROL Your remote control can be programmed to operate up to two devices, such as a garage door opener, gate operator, or commercial door operator and has a SMART/ LEARN button. Each button on the remote control works independentiy of the other and must be programmed separately. The images throughout this manual are for reference only and your product may look diferent. Read instructions thoroughly BEFORE beginning. | you are using this product with residential door openers, this product must be used only with door apeners manufactured starting January 1, 1993 that use photoelectric sensors located near the bottom of the door track.

IMPORTANT: The remote willactivate your door or gate during programming. Be sure the door is clear of ALL obstructions. Start with the garage door closed. Make sure the garage door opener has a working light because itis a programming indicator.

WARNING: This product can expose you PA to chemicals including lead, which are

known to the State of California to cause cancer or birth defects or other reproductive harm

For more information go to www. P65Warnings.ca.gov

CONNECT TO THE MYQ® APP

1. Close the garage door. IMPORTANT: The remote activates the garage door during programming. Ensure the door is clear of al obstructions.

2. Look for a Wi-Fi or a Powered by myQ® logo to determine if your garage door opener is myQ® compatible. If not, proceed to programming.

3. To start on monitoring the garage door movements, scan the OR code to download the myQ® app

4. To add your remote and name, follow the in- app instructions in order

6. After completing setup in the app, you can control the garage door opener and to receive notices ever time your garage door opens and closes.

GETTING STARTED Determine if the product you are programming the remote control to has a SMART/LEARN button or DIP Switches. The SMART/ LEARN button or DIP Switches are located either on the product or in an external receiver on or near the product. The following instructions are for a garage door opener with a SMART/LEARN Button. For DIP Switch programming instructions or additional help, see support.chamberiaingroup.com.

NOTE: DIP Switch is only available in KLIK3Gmodels manufactured before 11/2020.

PROGRAM TO GARAGE DOOR OPENERS WITH A YELLOW LEARN BUTTON

your remote was previous}y programmed to another type of opener, follow the programming

instructions on the next page to reprogram to a yellow LEARN button.

1... Start with the garage door closed 2. Press and immediately release the yellow LEARN button. The Learn LED glows steady or 30 seconds. Within 30 seconds. 3. Press and hold the button on the remote control you wish to use. 4. Release the button when the garage door opener lights blink ar to clicks are heard. 5. Testby pressing the button you just programmed. The opener activates. To program the remote to Chamberiain accessories, refer to the manual provided with the accessony

PROGRAM TO COMPATIBLE GARAGE DOOR OPENERS

1. Remove the remote control couer. Press and hold the program button until the LED turns on.

2. Press and release the SMART/ LEARN button on your garage door opener.

3. Select a button to program on the remote control. Press and release the button the specified number of times according to the following chart. NOTE: Make sure the LED stops flashing between each press of the button. The garage door opener will respond by clicking, blinking or activating.

[Garage Door [ype/Colorot [Year [Timesto Opener Brand _ |SMART/LEARN press button remote button Linear® Mega-Code [eme | 1 x T997- Ghamberäin®* [Orangered |395 2 Ghamberän®* [Purple Le | x T93- Ghamberäne* Green Es 4 ETS 2005- Overhead Door® | ielieode Current | © Genie TRS Overhead Door® | ielieode Current | $ Saney® Secure Code [199 T Chamberain®*_|Vellour ae | 8 Name Dañon® [Roling Gode [1990 5 Direme ie Garage®" 4 D LE Gurent | 1° Guardian®” Sommer+* |Black | Ryobi Roling Code [208, | 12

* Chamberlain, LiftMaster, Sears Craftsman, Do-it Master Mechanic, Raynor, True Value and Sears Craftsman are compatible with Chamberiain technology. ** Find Genie Intellicode Il instructions at support chamberiaingroup. com: *** Compatible with KLIKSU-BK2 and KLIKSU-SS only. 4. Press the program button on the remote control to save. 5. Testby pressing the button you just programmed. The opener activates. To program the remote to Chamberiain accessories, refer to the manual provided with the accessony

À WARNING To prevent possible SERIOUS INJURY or

+ NEVER allow small children near batteries.

+ Ifbattery is swallowed, immediately notify doctor.

To reduce risk offre, explosion or chemical

Dispose of batteries proper. Replace ONLY with 3V CR2032 coin batteries

Go to support.chamberlaingroup.com for more information.

NOTICE: This device complies with part 15 of the FCC rules and Innovation, Science and Economic Development Canada license-exempt RSSS. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modification not expressiy approved by the party responsible for compliance could void the user's authority to operate the equipment.

All trade names used herein are trademarks of respective manufacturers listed

© 2023 The Chamberlain Group LLC. Al Rights Reserved

114-5462-000D CHAMB=RLAIN MODÈLE KLIK3C-BK2 MODÈLE KLIK3C-SS MODÈLE KLIK5C-BK2