BOULDER50 - Solar panel GOAL ZERO - Free user manual and instructions
Find the device manual for free BOULDER50 GOAL ZERO in PDF.
User questions about BOULDER50 GOAL ZERO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Solar panel in PDF format for free! Find your manual BOULDER50 - GOAL ZERO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BOULDER50 by GOAL ZERO.
USER MANUAL BOULDER50 GOAL ZERO
Plug the 8mm blue ringed cable into the INPUT port on the Goal Zero Yeti or Sherpa and angle the Boulder 50 Solar Panel toward the sun with the attached kickstand. You'll get the best solar charging experience if you continue to reposition the solar panel throughout the day.
HOW TO CHAIN
To chain two or three Boulder Solar Panels together, plug the blue ringed connector from one panel into the input connector or input port of the next panel, using the charging cable from the final panel to connect to your Goal Zero Yeti or Sherpa.
If you're chaining more than three Boulder 50 Solar Panels together, or any configuration over 150W, you will need to purchase a combiner cable from Goal Zero, call our solutions center at 888-794-6250 for more information.
TECHNICAL SPECIFICATIONS
| Boulder 50 Solar Panel | |
| Charges the following | Approx. Charge time |
| GOAL ZERO Sherpa 50 | 3-4 hrs |
| GOAL ZERO Sherpa 100 | 4-8 hrs |
| GOAL ZERO Yeti 150 | 6-12 hrs |
| GOAL ZERO Yeti 400 | 16-32 hrs |
| GOAL ZERO Yeti 1400 | 57-114 hrs |
| Solar Panel | |
| Rated Power | 50W |
| Open Circuit Voltage | 18-22V |
| Cell Type | Monocrystalline |
| General | |
| Chainable | Up to 150W |
| Weight | 12.4 lbs (5.6 kg) |
| Dimensions | 21.75 x 26.75 x 1.75 in (55.2 x 70.0 x 4.4 cm) |
| Certs | ### CC |
| Warranty | 12 months |
FREQUently ASKED QUESTIONS
Q: Are the Boulder Solar Panels waterproof?
A: Yes. The Boulders are designed to withstand the elements, so they're great for permanent installations. What you're recharging from the Boulders is what needs your help to stay dry, so keep those power packs and power stations covered up and protected from the dust, rain, and snow.
Q: Can I chain a Boulder 50 with older Boulders?
A: Depends on the panels. Yes, you can chain the Boulder 50 Solar Panel with other Boulders that have an 8mm input or input connector, like another Boulder 50 or the older Boulder 30, by inserting the 8mm blue-ringed connector of the Boulder 50 into the 8mm input of the other Boulder Solar Panel. When chaining Boulder Solar Panels in configurations over 150W, you'll need to purchase a combiner cable from Goal Zero. Give our customer solutions center call to determine the right cable for your setup.
Q: What can I charge directly from the Boulder Solar Panels?
A: All of our Boulder Solar Panels are designed to charge Sherpa Power Packs and Goal Zero Yeti Portable Power Stations. If you're looking to recharge things like headlamps, phones and other USB devices, check out our foldable Nomad Solar Panels.
Q: How long will it take to charge my Goal Zero Yeti from a Boulder Solar Panel?
A: That depends on a few factors - how big the Yeti is, how big the Boulder is, how cloudy it is, how hot it is, just to name a few. We've created a handy calculator that takes all of these factors into consideration. Also, great news, all the Yetis allow for something called "pass-through power", this means you can be trickle charging your Yeti and using it to power your gear, all at the same time.
Q: Can I mount the Boulder Solar Panels to my roof?
A: Sure can. We designed the new Boulders to work with traditional z brackets so they're easier to install. Pairing a Boulder Solar Panel and Goal Zero Yeti Portable Power Station for a camper or van? Talk about a match made in heaven.
COMO FUNCIONA
Designed in the U.S.A.
Made in China
Boulder is a trademark of Goal Zero.
