ED32A10HD-VE - TV EDENWOOD - Free user manual and instructions

USER MANUAL ED32A10HD-VE EDENWOOD

ÉTAPE 1 :" Configurer Yandex on TV

LECTRO DEPOT Table of Contents

Safety Information Introduction …

High Dynamic Range (HDR) / Hybrid Log-Gamma (HLG).

Accessories Included. Stand Installation & Wall Mounting Antenna Connectior Other Connections. Tuming On/Off the TV. TV Control & Operation Remote Control …

First-Time Use … Using the E-Manual Home Screen. Connecting to the Internet Setup via Mobile Phone. Prepare Live TV... Using External Devices Using the TV Voice Service. Guidelines. Enjoy Live TV. Channel Scan.

Live Menu. Channel Edit Programme Info... Programme Guide (EPG).

Programme Recording (PVR).

Lea about Live TV Support Settings... Benefits of Smart TV . Using a VIDAA Account Voice Service Setup .… Content Sharing. Using Apps … Using the Art App. Enjoy the Internet . Data Protection and Security Usage Mode Setup. Using the Mobile App. Connecting to External Devices . Accessories . Connecting a Set Top Box Connecting a Blu-ray or DVD Player.

Sharing your Smart Phone/Computer Screen on the

Comeaing USB Devices. Connecting Headphones … Connecting Audio Visual (AV) Devices... Connecting Speakers or Other Audio Receivers…71

Connect « Digtsl Aude System th ARC} eARC..

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO {OT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains.

The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable. If the ‘TV set is not disconnected electrcally from the mains, the device wil still draw power for all situations even if the TV is. in Standby mode or switched off.

Note: Follow the on screen instructions for operating the related features.

IMPORTANT - Please read these instructions fully before installing or operating

À warNING: This device is intended to be used by persons (including children) who are capable / experienced of operating such a device unsupervised, unless they have been given supervision or instruction concerning the use of the device by a person responsible for their safety.

+ Use this TV set at an altitude ofless than 5000 metres above the sea level, in dry locations and in regions with moderate or tropical climates.

+ The TV set is intended for household and similar indoor use but may also be used in public places.

+ For ventilation purposes, leave at least 5cm of free space around the TV.

+ The ventilation should not be impeded by covering or blocking the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

+ The power cord/plug should be easily accessible. Do not place the TV, fumiture, etc. on the power cord. À damaged power cord/plug can cause fire or give you an electric shock. Handle the power cord by the plug, do not unplug the TV by pulling the power cord. Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this should only be done by qualified personnel.

+ Do not expose the TV to dripping or splashing of liquids and do not place objects filed with liquids, such as vases, cups, etc. on or over the TV (e.g. on sheives above the TV).

+ Do not expose the TV to direct sunlight or do not place open flames such as lit candles on the top of or near the TV.

+ Do not place any heat sources such as electric heaters, radiators, etc. near the TV set.

+ Do not place the TV on the floor orinclined surfaces.

+ To avoid danger of suffocation, keep plastic bags out of the reach of babies, children and domestic animals.

+ Carefully attach the stand to the TV. If the stand is provided with screws, tighten the screws firmly to prevent the TV from tilting. Do not over-tighten the screws and mount the stand rubbers properiy.

+ Do not dispose of the batteries in fire or with hazardous or flammable materials.

+ Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

+ Excessive sound pressure from earphones or headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the TV.

À caen À rx cc shock

Markings on the Product

Serious injury or death risk

Dangerous voltage risk

Important maintenance component

The following symbols are used on the product as a marker for restrictions and precautions and safety instructions. Each explanation shall be considered where the product bears related marking only. Note such information for security reasons.

ü Class 11 Equipment: This appliance is

designed in such a way that it does not require , Hazardous Live Terminal: The marked

a safety connection to electrical earth. terminal(s) is/are hazardous live under normal operating conditions.

Caution, See Operating Instructions: The Ali marked area(s) contain(s) user replaceable coin or button cell batteries. Class 1 Laser Product: This product contains Class 1 laser source that is safe under rea-

sonably foreseeable condi- tions of operation.

LASER PRODUCT English -48-

+ Do not ingest the battery, Chemical Burn Hazard.

+ This product or the accessories supplied with the product may contain a coin/button cel battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

+ Keep new and used batteries away from children

+ Ifthe battery compartment does not close securely, stop using the product and keep it away from children.

+ If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

A television may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

+ ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.

+ ALWAYS use fumiture that can safely support the television set.

+ ALWAYS ensure the television setis not overhanging the edge of the supporting furniture.

+ ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.

+ ALWAYS route cords and cables connected to your

television so they cannot be tripped over, pulled or

NEVER place a television setin an unstable location.

NEVER place the television set on tall furniture

{for example, cupboards or bookcases) without

anchoring both the furniture and the television set

to a suitable support.

NEVER place the television set on cloth or other

materials that may be located between the television

set and supporting furniture.

+ NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed

+ The equipment is only suitable for mounting at heights <2 m.

Ifthe existing television set is going to be retained and

relocated, the same considerations as above should

Apparatus connected to the protective earthing of the building installation through the MAINS connection or through other apparatus with a connection to protective earthing — and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator).

WALL MOUNTING WARNINGS

+ Read the instructions before mounting your TV on the wall.

+ The wall mount kit is optional. You can obtain from your local dealer, if not supplied with your TV.

+ Do not install the TV on a ceiling or on an inclined wall.

+ Use the specified wall mounting screws and other accessories.

+ Tighten the wall mounting screws firmiy to prevent the TV from falling. Do not over-tighten the screws.

Figures and illustrations in these operating instructions are provided for reference only and may differ from the actual product appearance. Product design and specifications may be changed without notice.

Thank you for choosing our product. You'll soon be enjoying your new TV. Please read these instructions carefully. They contain important information which will help you get the best from your TV and ensure safe and correct installation and operation.

High Dynamic Range (HDR) 1'Hybrid Log-Gamma (HLG)

Using this feature the TV can reproduce greater dynamic range of luminosity by capturing and then combining several different exposures. HDR/HLG promises better picture quality thanks to brighter, more realistic highlights, more realistic colour and other improvements. It delivers the look that flmmakers intended to achieve, showing the hidden areas of dark shadows and sunlight with full clarity, colour and detail. HDR/HLG content is supported via native and market applications (except Netflix, Prime Video), HDMI, and USB input.

Accessories Included

+ Batteries: 2 x AAA

+ Operating Instructions + Power Cord

Stand Installation & Wall Mounting

Assembling / Removing the stand(s) Preparations

Take out the stand(s) and the TV from the packing case and put the TV onto a work table with the screen panel down on a clean and soft cloth (blanket, etc.).

+ Use a flat and firm table bigger than the TV. + Do not hold the screen panel part.

+ Make sure not to scratch or break the TV. Assembling the stand{s)

+ Place the stand(s) on the stand mounting pattern(s) on the rear side ofthe TV.

+ Insert the screws provided and tighten them gentiy until the stand(s) is(are) properiy fitted.

Removing the stand(s) from the TV Be sure to remove the stand(s) in the following way when using the wall mount bracket or repacking the TV.

+ Put the TV onto a work table with the screen panel down on a clean and soft cloth. Leave the stand(s) protruding over the edge of the surface

+ Unscrew the screws that fx the stand(s).

+ Remove the stand(s).

When using the wall mount bracket

Your TV is also prepared for a VESA-compliant wall

mount bracket. fitis not supplied with your TV, contact

your local dealer to purchase the recommended wall- hanging bracket.

Holes and measurements for wall mount bracket

VESA WALL MOUNT MEASUREMENTS Hole Pattern W H Sizes (mm) 75 75 Screw Sizes min. (mm) 5 Length (X) max. (mm) 8 Thread (V) Ma

Connect the aerial or cable TV plug to the aerial input (ANT) socket located on the rear side of the TV.

Rear side of the TV Note:

+ You may also connect devices that can receive broadcast signals such as à Set Top Box.

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them:

Cables (not supplied)

HDMI Connection (side&back)

ee S SPDIF (Coaxial Out) Connection (side)

Headphone Connection (side)

us Connection (side)

k ci É | connection Ï (side)

XX I you want to connect a device to the TV, make sure that both the TV and the device are tumed off before making any connection. After the connection is done, you can tum on the units and use them.

When using the wall mounting kit (contact your dealer to purchase one. if not supplied), we recommend that you plug all your cables into the back of the TV before mounting on the wall. Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings. The USB inputs on the TV support devices up to 500mA. Connecting devices that have current value above 500mA may damage your TV. When connecting equip- Iment using a HDMI cable to your TV. to guarantee sufficient immunity against parasitic frequency radiation land trouble-free transmission of high definition signals, such as 4K con- ent, you have to use a high speed shielded (high grade) HDMI cable with ferrites.

Ethernet Connection (back)

Turning On/Off the TV Connect power

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket.

After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.

Plug one end (the two-hole plug) of the supplied

detachable power cord into the power cord inlet on

the rear side of the TV as shown above. Then plug the other end of the power cord into the mains socket outlet. The TV will switch to standby mode.

+ The position of the power cord inlet may differ depending on the model.

To switch on the TV from standby

If the TV is in standby mode the standby LED lights

up. To switch on the TV from standby mode either:

+ Press the Standby, Guide, Netflix, Prime Video or Freeview Play button on the remote control

+ Press the control button on the TV.

The TV will then switch on

+ The remote control buttons may vary depending on models/ countries/regions.

To switch the TV into standby

+ Press the Standby button on the remote control.

+ Press the control button on the TV, the function options menu will be displayed. The focus will be on the current input source option. Press the button consecutively until the Power Off option is highlighted. The TV will switch into standby mode.

To switch off the TV To power down the TV completely, unplug the power cord from the mains socket.

TV Control & Operation

LR Your TV has a single control button. This button allows you to control the Standby-On Inputs / Channel Up- Down / Volume Up-Down and Power Off functions ofthe TV.

Note: The position of the control button may differ depending on the model.

Operating with the Control Button

+ Press the control button to display the function options menu.

+ Then press the button consecutively to move the focus to the desired option if needed.

+ Touse the Volume Up-Down function, press and hold the button for about 2 seconds.

To turn the TV off: Press the control button to

display the function options menu, the focus will be

on the current input source option. Press the button

consecutively until the Power Off option is highlighted

To turn on the TV: Press the control button, the TV

To change volume: Press the control button to display the function options menu and then press the button consecutively to move the focus to Vol# or Vol- option Press and hold the button to increase or decrease the volume.

To change channel (on TV input source, Live TV mode): Press the control button to display the function options menu and then press the button consecutively to move the focus to CH+ or CH- option:

To change input source: Press the control button to display the function options menu, the focus will be on the current input source option. Scroll through the available input sources by pressing the button until the desired input source option is highlighted.

Note: Live TV settings menu OSD in Live TV mode cannot be displayed via the control button.

Operation with the Remote Control

Press the Home button to display or return to the Home screen of your TV. Use the directional buttons to move the focus, proceed, adjust some settings and press OK to make selections in order to make changes, set your preferences, enter a sub-menu, launch an application, etc. Press Back/Return to return to the previous menu screen.

Once you have connected external systems to your TV, you can switch to different input sources. Press the Source button on your remote control consecutively to select the different sources.

Changing Channels and Volume

You can adjust the volume by using the Volume #- buttons and change the channel in Live TV mode by using the Programme +/- buttons on the remote.

Standby (*): Switches On / Off the TV Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen Guide: Displays the electronic programme guide Coloured Buttons: Follow the on-screen instruc- tions for coloured button functions

Menu: Displays TV menu

Directional buttons: Helps navigate menus, content, etc. and displays the subpages in TXT mode when pressed Right or Left

OK: Confirms user selections, holds the page (in TXT mode), views Channels menu (DTV mode) BacK/Return: Returns to previous screen, pre- vious menu, opens index page (in TXT mode). Quickly cycles between previous and current channels or sources

Home: Opens the Home Screen

. Volume +/-: Increases/decreases the volume

Mute: Completely turns off the volume of the TV . Text: Displays teletext (where available), press

again to superimpose the teletext over a normal broadcast picture (mix)

.. Free: Launches the Vidaa Free application . Netlix: Launches the Netflix application

.. YouTube: Launches the YouTube application

. Browser: Launches the Browser application

Disney+: Launches the Disney+ application

.. Plex: Launches the Plex application

.. Prime Video: Launches the Amazon Prime Video application

. Deezer: Launches the Deezer application

. Info: Displays information about on-screen content, shows hidden information (reveal - in TXT mode)

.. Subtitle: Opens the subtitle menu where you can turn subtiles on or off (where available)

. Channel +/-: Increases/decreases channel number

. Exit: Closes and exits from displayed menus or returns to previous screen

. PlayPad: Select the button you want to use on the PlayPad and press OK Use the media buttons to control the playback of the media. Control elements to play, pause, stop, rewind and fast forward the media will be available Selectthe record button and press OK to record a programme or select the pause button and press OK to start timeshift recording Channel List: Opens the channel list Input: Shows available broadcast and content

C) Edit Button Press and hold the Edit button on the remote control À menu will appear on the screen where you can change the behaviour of the button. You can select one ofthe input sources (e.g. HDMI, AV, etc.) or apps (any app that is available on the Home screen) shown on the screen.

If the function of the Edit button is changed, the selected app/feature will be launched when the button is pressed. If not, you will see a message stating how to assign a function to this button.

View the embedded E-Manual that contains information about your TV's key features.

claimer: Instructions and images through this manual are only for reference and may differ from the actual product.

Press the Home button on your remote control and select Settings>Support>E-Manual.

Enter the Home screen of the E-Manual. Press the Source button on your remote control and

select TV, then press the Menu button on your remote control and select E-Manual.

Enter Enjoy Live TV chapter to learn more about how to set up Live TV features. Press the Source button on your remote control and select Connection Guide. Enter Connecting to External Devices chapter to learn more about how to connect external devices to your TV and how to set up.

Use the Buttons in the E-Manual Search

Search for the product feature information, the E-Manual will provide all the tiles and content that contains the search information.

Scan the QR Code with your Smart Phone to open the E-Manual on your device

Select Try Now, and it will guide you to the corresponding TV menu for trying the function.

The Home screen is the centre of your TV. All TV

functions can be accessed from the Home screen

Account, Search, Notification, Input, Settings and

Live TV icons will be available. You can scroll through

them using the directional buttons.

+ Indicators or icons may vary depending on models/countries/ regions.

Display the Home Screen

Press the Home button on your remote control to enter the Home screen.

To exit the Home screen, press the Source button on your remote control or use the navigation buttons to

move the focus to the Input icon on the left side of the screen, press the OK button to enter and select your desired input source.

Use the Navigation Bar

The navigation bar refers to indicators and icons on the top of the Home screen

+ Indicators or icons may vary depending on models/countries/ regions.

Account: À VIDAA account provides all the best features of your Smart TV and ensures that all services are kept up to date.

For more information about VIDAA account, please refer to Benefits of Smart TV>Using a VIDAA Account in this manual

Search: Search the content you want.

Notification: Allow pop-up notifications to appear for useful information and events that occur with your TV, including: Advertising, New Arrivals, Warnings and Legal Statements, System Messages and Alexa Notification.

You can enable/disable each of these notifications within Settings in the notification centre.

You can view the list of event messages generated by the TV.

To delete all notifications, select Clear AI.

+ The Alexa Notification may not be applicable in some models/countries/regions.

+ When you sign into your VIDAA account,

please find Notifications in VIDAA Account on the Home screen.

Input: Selectthe input source depending on the device you have connected to your TV.

Settings: Manage TV configuration

Live TV: Provides quick access to Live TV. For more information, please refer to First-Time Use>Prepare Live TV in this manual

You can add inputs, channels and websites to the Home screen to have quick access to them for your convenience.

Add and remove inputs + Press the Source button.

+ Move the focus to an input you want to add to the Home screen and press Menu>Add to home>OK.

+ Some options from the input source page cannot be added to the Home screen.

+ To remove the input from shortcuts, move the focus to the shortcut, then press and hold the OK button on your remote control.

Add and remove channels

+ In Live TV, press the OK button to access the channel list.

+ Press the Menu button and press the OK button to tick channel(s) that you would like to add on the Home screen.

+ Select Add to home. The channel icon will appear in shortcuts on the Home screen.

+ To remove the channel from shortcuts, move the focus to

the shortcut, then press and hold the OK button on your remote control.

Add and remove webpages

+ In Browser, visit a website you would like to add on the Home screen.

+ Use the D-pad to move the focus to the Add to home icon in the top of the Browser navigation bar and select Add to home.

+ Select Add and this webpage will appear in the shortcuts on the Home screen.

+ To remove webpages from shortcuts, move the focus onto the shortcut page, then press and hold the OK button on your remote control.

Connecting to the Internet

You can access the Internet via your TV, by connecting itto a broadband system. It is necessary to configure the network settings in order to enjoy a variety of streaming content and internet applications. These settings can be configured from the Settings>Net- work menu.

Connect to a Wired (Ethernet) Network

To get access to the Internet using a wired connection, it is recommended to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, netmask, gateway, DNS Server 1 and DNS Server 2, so you do not have to enter them manually. Most home networks already have DHCP.

1. Broadband ISP connection 2. LAN (Ethernet) cable

3. LAN input on the rear side of the TV After connecting to a wired (Ethernet) network, press the Home button on your remote control, and select Settings>Network>Network Configuration.

Set the TV network by selecting Network Configura- n and press the OK button to enter the submenu.

Choose a wired (Ethernet) network connection to access the Internet.

+ Ethernet Display network status. + IP Settings Configure the IP setting for your network connection. Connect to a Wireless Network

To connect to an available wireless network, make sure that you turn on your wireless router and have the wireless routers SSID and password before attempting to connect.

1. Broadband ISP connection

To get access to the Internet using a wireless connection, press the Home button on your remote control, and select Settings>Network>Network Configuration.

Set the TV network by selecting Network Configura- tion and press the OK button to enter the submenu

Choose a wireless network connection to access the Internet.

+ Refresh Refresh wireless network. + Advanced Settings

Configure the advanced wireless network settings for the TV.

+ Add You can add a wireless network. Note:

+ li no wireless router is found, select Add and enter the network name in the SSID.

+ lfno wireless router is found, select Refresh

Setup via Mobile Phone

When you turn on the TV for the first time, the TV will support setup via your smart device by scanning the OR code.

If you scan the QR code to allow setup via the mobile app, setup of the TV will be more efficient.

Before performing setup with the mobile app, please make sure your mobile device has Bluetooth activated and is connected to the same network as your TV. Note:

+ The setup above is for referencing purpose and may differ depending on models/countries/regions.

Prepare Live TV Start auto scan or manual scan

+ Press the Source button on your remote control and select TV.

+ Press the Menu button on your remote control and

select Settings>Channel>Auto Scan/Advanced Settings>Manual Scan.

Using External Devices

Access to connected external devices including wireless connected devices.

Switch between external devices connected to the TV

+ Press the Source button on your remote control or press the Home button and move the focus to the Input icon on the left side of the Home screen, press the OK button to enter.

+ Select your desired input source. Edit the name of input sources Method 1:

+ Press the Source button on your remote control or press the Home button and move the focus to the Input icon on the left side of the Home screen, press the OK button to enter.

+ Move the focus to an input source and press the Menu button on your remote control to edit the name of input sources.

Method 2 (for some models):

Press the Home button on your remote control, and

select Settings>System>Advanced Settings>input

Labels to edit the name of input sources.

+ Some input sources cannot be renamed.

Using the TV Voice Service

Select Voice Service on the TV To access the Voice Service and select a voice

+ press the Microphone button on your remote control:

+ or press the Home button and select the Settings icon, and select System>Voice Service.

Use the remote microphone

You can enjoy interacting with voice assistant

using your voice by just pressing and holding the

Microphone button on your remote control

The Microphone button may not be available on some remote control models.

+ Voice Service feature may not be applicable in some models/ countries/regions.

To use this function, End User Licence Agreement and corresponding Smart feature privacy policyAerms and conditions may be required to be agreed to.

Guidelines Note: + Guidelines content is only applicable in Germany. + The actual design of remote control could diff. How are TV channels sorted and why?

Channel sorting The availabilty of individual channel may depend on the selected reception path, such as cable (DVB-C) or antenna (DVB-T2) and the signal strength

Standard or an operator (Vodafone (NRW, Hessen, BW or Pÿur) can be selected for automatic channel search.

To sort channels when selecting an Operator When an operator is selected, the channels are sorted based on the operators criteria.

Channel sorting when selecting Standard:

After a successful channel search, the channels are sorted by genre. These include full programmes, children, sports, documentaries, or regional and local programmes.

Broadcasters with less coverage and, if available, international channels are listed in alphabetical order after the pre-sorted list.

Search by Channel name

The search within Live TV can be opened with the Down directional button. Here you can search for individual channels by name.

Radio channels are listed in alphabetical order after the list of TV channels.

To make finding radio channels easier, the filter function of the channel list is recommended (please refer to Display Channel List in this manual).

On the basis of bilateral contracts with the respective broadcasters, individual channels are placed in a position defined by the broadcaster in the channel list

The channel list can be manually sorted at any time. More information can be found in Edit Channel List and Edit Favourite Channel List in this manual

How are apps sorted and why?

The applications on the VIDAA platform are positioned according to the criteria bellow.

In the Application Docker on the Home Launcher:

To ensure equal representation of apps and provide fair treatment of newly launched content partners, the applications are ordered based on the (i) global number of users, (if) number of users in Germany, ii) number of subscribers in Germany, (iv) share of local language content, (v) variety of content, and (vi) novelty of the platform. At al times the Application launcher must include:

+ the 2 leading global SVOD platforms + the 2 leading global TVOD platforms + the 2 leading global AVOD platiorms + the leading local sports platform

- atleast4 leading local applications with predominantiy German content

+ atleast 1 leading application with children's content

+ at least 2 applications that have launched in the last 6 months

The ordering of applications is reviewed every 6 months and a new programming table is issued for newly connected devices.

In the My Apps section:

The applications are ordered in alphabetical order.

How can TV channels and apps be customised?

TV channels In Live TV, press the OK button on your remote con- trol and press the Right directional button to select a Live TV channel category such as Antenna or Cable, then use D-pad to select Edit. Altematively, in Live TV, press the Menu button, se- lect Settings>Channel>Channel Edit, and select a Live TV channel category such as Antenna or Cable + Press the OK button on the selected channel, then a checkbox will appear. You can select multiple channels at the same time to move or delete. + Move: Press the Left directional button to move the selected channel.

Moving the channels could be restricted by the operator. If you want to be able to move channels, it is recommended not to choose an operator during channel scan, LCN should be set to Of.

+ Delete: Press the Right directional button to delete the selected channel.

+ Restore: Press the Red button to enter the list of deleted channels. Press the Left directional button to restore the deleted channel

+ Filter: Press the Yellow button, the filter screen will pop up. Press the OK button to select options, the channel list will then be updated.

+ Search: Press the Blue button to search the channel list.

Viewing your favourite list

In Live TV, press the OK button on your remote control and press the Right directional button, then select FAV1-4 to display the favourite list

Editing the favourite list

In Live TV, press the OK button on your remote control and press the Right directional button, and select FAV1-4, then use D-pad to select Edit.

Altematively, in Live TV, press the Menu button on your remote control, and select Settings>Channel>Chan- nel Edit, then select FAV1 - FAVA4

You can add, move or remove favourite channels.

+ Select Add channels to add the selected channel to the favourite list.

+ Select a channel in a favourite list, press the Left directional button to move it.

+ Select a channel in a favourite list, press the Right directional button to remove it.

Factory installed apps: Select the item you want to move, then long press the OK button, use the D-pad to move it, and press the OK button to store position.

Non-factory installed apps: Select the item you want to move, then long press the OK button to select Sort, use the D-pad to move it, and press the OK button to store position. Note: Some Apps cannot be moved.

How are recommendations created?

Recommendations on the platform are dependent on the ability and willngness of partners to provide metadata to the platform. The content is positioned depending on the following criteria:

Above the fold applications: The recommendations originate from the Content partners that are highlighted. They are in the domain ofthe end-user.

Below the fold applications:

Recommendation rows are created by the editorial team, following these guidelines:

+ Content variety — Providing a broad selection of content

+ Type of access variety — Providing advertising- supported, subscription, and transactional content

+ Balance — Providing a balance between global and local content

Enjoy Live TV Channel Scan You can scan for channels automatically or manually Auto Scan + Press the Source button on your remote control, and select TV.

+ In Live TV, press the Menu button and select Settings> Channel>Auto Scan.

If no TV channels were saved before, you will be

prompted to do a channel scan.

+ Channel: Select from All Channels or Free Channels. This option may not be available depending on countries/regions/operators.

+ Scan Mode: Select from digital channels only

{DTV), digital and analogue channels (DTV+ATV)

or analogue channels only (ATV).

If you receive DVB-T or DVB-T2 signal, you can

LCN: Switch on/off LCN (Logical Channel Number).

Please note that some operators are restricted to

manually change the channel order. If you switch

off LON, then the channel list can be edited after

This function may not be applicable in some models/ countries/regions.

+ Channel: Select from All Channels or Free Channels. This option may not be available depending on countries/regions/operators.

+ Scan Mode: Select from digital channels only {DTV), digital and analogue channels (DTV+ATV) or analogue channels only (ATV).

+ LON: Switch onfoff LON (Logical Channel Number) Please note that some operators are restricted to manually change the channel order. If you switch off LON, then the channel list can be edited after channel scan

This function may not be applicable in some models/ countries/regions. Note:

+ Antenna/cable function may not be applicable in some models/countries/regions.

Manually scan for channels for DTV or ATV.

1. Press the Source button on your remote control, and select TV.

2. In Live TV, press the Menu button on your remote control and select Settings>Channel>Advanced Settings>Manual Scan.

DTV Manual Scan Manually scan for DTV services.

When the DTV Manual Scan screen appears, press the LeftRight directional button to select Antenna or Cable and configure corresponding settings. Then select Start to commence the search of that channel When the signal has been received, the signal strength will be displayed on the screen.

ATV Manual Scan Manually scan for ATV services.

+ Frequency: Input the channel frequency you want. + Picture System: Select the Colour System.

+ Sound System: Select the Sound System.

You can obtain quick access to the channel list, favourite channel ist or use relevant features with ease when watching TV programmes.

Display Channel List

In Live TV, press the OK button on your remote control to display the Channel List menu.

Altematively, in Live TV, press the Menu button on your remote control and select Channel List.

Learn about channel list sub-menu

In Live TV, press the OK button on your remote control and press the Right directional button. TV List

Display Live TV channel categories, such as Cable and Antenna.

FAV14 Display favourite lists 1 to 4. Filter

Select channels by Content, HD, Channel Block, Scrambled and Sort.

Some options in Filter may not be available in some models/countries/regions.

Edit Edit the channel list. Note:

+ The sub-menu options may vary depending on models/ countries/regions.

Display Favourite Channel List

In Live TV, press the OK button on your remote control and press the Right directional button, then select FAV1-4 to display the favourite list.

Learn about the On-Screen Menu In Live TV, press the Menu button to access the on- screen menu.

+ Channel List Quick access to Channel List. + Guide Quick access to Guide (EPG). + Subtitle Turn on Subtitle function or select subtitle option for digital broadcast content. + Recording List Quick access to Recording List. + PVR Launch Schedule Recording. + Timeshift Launch Timeshif.

+ HbbTV Enable or disable HbbTV functionality for the current channel (only available for digital channels).

+ E-Manual Enter Enjoy Live TV chapter to learn more about how to set up Live TV features.

+ Audio Only When you select this option, the screen will not display the picture. You can only listen to the audio. Press any button except the Standby button, Volume +/- buttons and Mute button to restore the picture.

+ Settings Setup picture, sound, channel, network, accessibility, system and support.

+ Some menus above may not be available in some models/ countries/regions.

Manually edit the channel list or favourite channel list to your preference.

Before you can edit the channel list, Channel Scan must be completed first

In Live TV, press the OK button on your remote control and press the Right directional button to select a Live

TV channel category such as Antenna or Cable, then use D-pad to select Edit.

Altematively, in Live TV, press the Menu button, select Settings>Channel>Channel Edit, and select a Live TV channel category such as Antenna or Cable.

+ Press the OK button on the selected channel, then a checkbox will appear. You can select multiple channels at the same time to move or delete.

+ Move: Press the Left directional button to move the selected channel.

Moving the channels could be restricted by the operator. If you want to be able to move channels, it is not recommended to choose an operator during channel scan, and LCN should be set to Off.

+ Delete: Press the Right directional button to delete the selected channel.

+ Restore: Press the Red button to enter the list of deleted channels. Press the Left directional button to restore the deleted channel.

+ Filter: Press the Yellow button, the filter screen will pop up. Press the OK button to select options, the channel list will then be updated.

+ Search: Press the Blue button to search for a channel.

Export the channel list to USB The current channel list can be exported to a USB storage device.

In Live TV, press the Menu button on your remote control and select Settings>Channel>Channel Edit>Export to USB.

Import the channel list from USB Previously exported channel lists can be imported via a USB storage device.

In Live TV, press the Menu button on your remote control and select Settings>Channel>Channel Edit>import from USB.

E Before you can edit the favourite list, Channel Scan must be completed first.

Add a channel to a favourite list

Favourite Channel List

You can add channels from various reception types to the favourite list.

+ In Live TV, press the OK button to display the channel list

+ Press the Menu button and select the channel(s) you want to add to the favourite list.

+ Select Add to Favourite and choose from FAV1- FAVA.

+ Then, a heart-shape icon will appear next to the added channel

Move or remove channels in a favourite list

In Live TV, press the OK button on your remote control

and press the Right directional button, select FAV1-4,

then use D-pad to select Edit.

Alternatively, in Live TV, press the Menu button on your

remote control and select Settings>Channel>Channel

Edit, then select FAV1-FAV4

You can add, move, or remove favourite channels.

+ Select Add channels to add the selected channel to the favourite list.

+ Select a channel in a favourite list, and press the Left directional button to move it.

+ Select a channel in a favourite list, and press the Right directional button to remove it.

While watching TV programmes, press the Info button to load the programme info bar. The information listed below will be available on the info bar.

+ Indicator of Favourite

+ Date and time, and channel category

+ The remote control buttons may vary depending on models/ countries/regions.

Programme Guide (EPG)

The Guide (EPG) provides a convenient way to check TV programmes for the upcoming 8 days. The information displayed by the Guide (EPG) is made available by the commercial television networks for digital channels only. The Guide (EPG) also provides a simple way to record your favourite programmes and a reminder function, which can switch channels automatically at scheduled times, so that you will not miss programmes of interest. The availability and amount of programme information will vary depending on the broadcaster.

+ The Guide (EPG) function is only available for digital channels. Analogue channels are not supported.

In Guide (EPG), when a current programme is selected, press OK>Watch to switch to the channel you want to see.

In Guide (EPG), press the Up/Down directional button to select the channels. Press the Lef/Right directional button to select programme based on the time schedule.

Press the OK button to select PVR or Reminder.

For more information, please refer to Enjoy Live TV>Programme Recording (PVR) or Enjoy Live TV>Reminder in this manual

Note: The PVR function may not be applicable in some models/countries/regions.

In Guide (EPG), press the Red button. This will display a list of scheduled reminders and recordings.

In Guide (EPG), press the Green button. Use the colours to indicate different genres in the Guide (EPG) for quick and easy viewing

Note: This function may not be applicable in some models/ countries/regions.

In Guide (EPG), press the Yellow button to select programmes of he previous day.

In Guide (EPG), press the Blue button to select programmes of the next day.

Programme Recording (PVR)

The PVR function allows you to easily record digital television content for later viewing.

Read before Recording Programmes

+ To use PVR, you must connect a storage device for recording. PVR will not function if a data storage device has not been connected.

+ The format of the storage device can be NTFS or FAT32. The storage space of your device should be no less than 2GB (for 15 minutes high-definition video). It is strongly recommended to use a USB mobile hard disk drive instead of a USB flash drive as the storage device.

If the transfer rate of your hard disk is too slow, a pop-up notice will be displayed. In this case, you will need to use another disk with higher speed

PVR is only available for digital channels and does not support analogue channels.

+ Some broadcasters may restrict the recording of programmes.

+ If a recording is made from a locked channel, the system PIN will need to be input to playback the recorded content.

+ Some channel-related configuration may conflict with background recording. In this case, a reminder window will pop up.

+ The PVR function may not be applicable in some models/countries/regions.

Recording Schedule Recording In Live TV, press the Menu button and select PVR.

Altenatively, press the Up directional button or the Info button to load the info bar, and select a programme and choose PVR.

If your remote has the Pause/Play button, press itand use D-pad to select record icon to set up PVR.

You can select recording mode from Time, Manual stop and Programme.

When you select time, you can set the booking time and period.

In Guide (EPG), press the the Red button to view the scheduled recording. In the schedule recording list, you can readjust the reservation information that has been set.

If you press the Standby button during recording and select Standby Recording, your TV wil go into standby mode, butthe recording process wil continue. If you press the Standby button again to wake up the TV, the recording process wi. not be affected. After recording, the recorded file will be automatically saved to the attached USB disk

Background Recording

When you switch to an App or another source (e.g HDMI) during recording, the recording process will continue. When the recording has completed, the recorded programme will be automatically saved to the attached USB disk.

If you want to manually stop recording, press the Source button on your remote control and select TV to switch back to the channel that is currently being recorded, and then press the Left/Right directional button and select the stop button icon on-screen to stop.

Learn about the recording control bar

The items listed below will be available on the control bar.

+ The PVR function may not be applicable in some models/ countries/regions.

Recording List Access recording list

In Live TV, press the Menu button on your remote control and select Recording List

Watch recorded programmes

In Live TV, press the Menu button on your remote control and select Recording List>Recorded

Select a recorded programme in the recording list and press the OK button to watch it.

If you connect more than one storage device to the TV, Recorded (Disk for Recording) and Recorded (All Disk) are available on-screen to select.

Manage recording list

In Live TV, press the Menu button on your remote control and select Recording List>Recorded

You can sort or delete recorded programmes. + Sort recorded programmes

Select All, and you can choose from the list to sort the recorded programmes. Note:

+ This function may not be applicable in some models/ countries/regions.

Delete recorded programme

Select Edit, select a recorded programme in the recording list and press the Right directional button to delete it.

Manage schedule recording list

In Live TV, press the Menu button on your remote control and select Recording List>Scheduled.

You can adjust the schedule recording information or cancel scheduled recordings. Schedule recording items are identified with clock icons. + Delete scheduled recording Select Edit, select a scheduled recording in the schedule list and press the Right directional button to delete it. + Edit scheduled recording Select scheduled recording in the schedule list, then press the OK button to edit. Note:

+ The Recording List function may not be applicable in some models/countries/regions.

Setup this feature to allow reminders to be displayed of future programmes.

Set up a Reminder + In Live TV, press the Guide button, or press Menu > Guide (EPG) to display programme guide.

+ In Guide (EPG), press the Up/Down directional button to select the channels. Press the Lef/Right directional button to select a programme that has not been aired.

+ Press the OK button to select Reminder.

+ Reminder is only available for programmes that have not been aired yet.

Manage the Reminder List

In Live TV, press the Menu button on your remote control and select Recording List>Scheduled'

You can change reminder information or cancel reminders. Reminder items are identified with clock icons.

Select Edit, select a reminder in the schedule list and press the Right directional button to delete it.

Select reminder in the schedule list, then press the OK button to edit.

This option allows you to pause and rewind Live TV. This function operates by recording temporarily to a storage device. Please ensure your storage device is connected and there is enough free disk space, otherwise timeshift will not function

In Live TV, press the Menu button on your remote

control and select Timeshift, then the playback bar

If your remote control has the Pause/Play button,

press it and press the OK button to launch Timeshif.

The items listed below will be available on the playback

+ Unwatched time for buffered content

+ Record button: to convert a Timeshift to a live recording of the current broadcast channel. Select the record button icon and the programme content you have watched in Timeshift will also be saved to the storage device.

+ Stop Timeshift button: to exit the function and watch the current broadcast.

+ The Timeshift function does not support analogue channels.

+ The storage space ofthe device should be no less than 2GB. His strongly recommended to use a USB mobile hard disk drive instead of a USB flash drive as the storage device.

+ The Timeshift function may not be applicable in some models/countries/regions.

HbbTV Access service from providers through HbbTV.

Press the Home button on your remote control, and select Settings>System>Application Settings>Hb- bTV.

Enable or disable HbbTV functionaliy for all channels {only available for digital channels)

In Live TV, press the Menu button to select HbbTV. Enable or disable HbbTV functionalty for the current channel (only available for digital channels).

When HbbTV service is enabled and the programme supports HbbTV, follow the instructions on the TV screen to select the corresponding button on the remote control to access the service.

+ This function may not be applicable in some models/ countries/regions.

+ Some channels may not support the HbbTV service. + HbbTV cannot be used during Timeshift or PVR.

Learn about Live TV Support Settings + Channel List Auto Update

Press the Menu button on your remote control and se- lect Settings>Channel>Advanced Settings>Chan- nel List Auto Update.

Allow your TV to automatically update the channel list from the content provider.

+ Programme Guide Auto Update

Press the Menu button on your remote control and select Settings>Channel>Advanced Settings>Pro- gramme Guide Auto Update.

TV will automatically update the Programme Guide data overight while in standby mode.

+ CI+ Module Settings

Press the Menu button on your remote control and select Settings>Channel>Advanced Settings>CI+ Module Settings.

Review the CI# settings: Common interface, CI card PIN and CAM Profile Search. This function may not be applicable in some models/countries/regions.

Press the Menu button on your remote control and select Settings>System>Advanced Settings>PVR & Time Shift

Initialise the external USB disk to support PVR and Time-Shif. When you connect more than one USB storage device to the TV, the one selected in PVR Setup or Time Shift Setup is initailised for starting recording or launching timeshift. The recorded programme will be saved in the selected storage device.

When launching timeshift, the programme will be recorded temporarlÿ to the selected storage device.

You can add padding time to start recording before the event starts, or after the event has finished by delaying the end of recording depending on how much Padding time is added, this is setup in Start in advance or Delay Ending

In Live TV, press the Down directional button to search for channels.

Turn on Parental Control to prevent children from being able to view certain content. For more information, please refer to Settings Overview>Using Parental Controls in this manual

Adjust picture or sound mode or other advanced picture or sound settings. For more information, please refer to Settings Overview>Picture or Settings Overview>Sound in this manual.

Benefits of Smart TV Using a VIDAA Account

Sign into your VIDAA account and create multiple profiles to receive personalised content according to your account preferences.

Before signing into your VIDAA account, make sure your TV is connected to the network. For more about network settings, please refer to First-Time Use>Connecting to the Internet>Connect to a Wired (Ethernet) Network or Connect to a Wireless Network in this manual

+ After the network is connected, press the Home button on your remote control and select the Account icon in the left navigation bar on the Home screen

+ Register your device to your VIDAA Account. After entering your E-mail and password, select Sign In.

+ You can create a profile and give it a name.

If you forget your password and need to change the

password, select Forgot Password?, input your

E-mail address and verification code, then create a

Create a new account

If you do not have a VIDAA account, create a new one to enjoy the best features of your Smart TV.

Before creating a new account, make sure your TV is connected to the network. For more about network settings, please refer to First-Time Use>Connecting to the Internet>Connect to a Wired (Ethernet) Network or Connect to a Wireless Network in this manual.

+ After the network is connected, press the Home button on your remote control and select the Account icon in the navigation bar on the left side ofthe Home screen

+ Select Create Account on screen.

+ Enter your firstname, last name, E-mail address and password. First Name and Last Name are optional.

+ Select Create an Account

Setup voice assistant to control your TV by your voice. Note:

Voice Service feature may not be applicable in some models/ countries/regions.

To use this function, End User Licence Agreement and corresponding Smart feature privacy policyAerms and conditions may be required to be agreed to.

Set up Alexa, and enjoy Alexa voice service. You can ask for information, streaming music, search for your favourite movies, control your TV and more, just by asking Alexa.

Before setting up the Amazon Alexa Service, connect your TV to the network and sign into your VIDAA Account at Home>Account. For more information about how to sign into the VIDAA Account, please refer to Benefits of Smart TV>Using a VIDAA Account in this manual.

+ Press the Home button and select the Settings icon, and select System>Voice Service>Amazon Alexa.

+ Give your TV a name.

+ Download the Alexa app on your mobile device Open the app and sign in with your Amazon account. + Search and enable VIDAA Voice skill following the instruction. After the skil is enabled, you will be prompted to finish device pairing. Please finish device pairing with this TV, and make sure this TV is discovered by Alexa before using Alexa service.

+ Now Alexa is set up and ready. You can enjoy interacting with Alexa using your voice by just by asking Alexa.

+ The Alexa function may not be applicable in some models/ countries/regions.

The setup steps above may vary. Please refer to the

Shipment with voice remote control varies depending on TV

models/countries/regions.

+ You can use Alexa without signing into your account by Skipping the sign in section. In this case, you can still use your voice to change the channel and control playback. Sign into your account in the settings menu at any time to enjoy more functions of Alexa

This feature requires Alexa buit-in service. Otherwise, use external Alexa-enabled devices (e.g. Alexa App, Echo) to control your smart TV by using just your voice.

+ Download and install the remote control app on your mobile device at Home>Settings>Support-Mobile App Download. Press the Microphone icon in the app to interact with Alexa on your TV.

+ You can select the language used by Alexa at

Home>Settings>System>Voice Service>Amazon

Alexa>Language. This feature requires Alexa built-in

service, which varies depending on TV models and

VIDAA Voice Setup VIDAA Voice is a voice assistant to help you control the TV and search content, supporting several languages. Before using VIDAA Voice, please check the following + Network connected + Voice remote paired

+ End User Licence Agreement and voice feature privacy policy/terms agreed

To access the Voice Service centre and set voice

assistant to VIDAA Voice, you can choose one of

+ Just press the Microphone button on your remote control.

+ Press the Home button and selectthe Settings icon and select System>Voice Service.

When VIDAA Voice is selected as your voice assistant,

select the language of VIDAA Voice in the Voice

Service centre. Then press and hold the Microphone

button on your remote control to interact with VIDAA Voice

+ VIDAA Voice may not be applicable in some models/ countries/regions.

Shipment with remote control varies depending on TV models/countries/regions.

For remote controls without the Microphone button, download and install the app on your mobile device at Home>Settings>Support>Mobile App Download. Press the Microphone icon in the app to interact with your TV.

Google Smart Home Service Setup

For specific models and countries/regions, Google Smart Home Service function is available. Set up Google Smart Home Service to control your smart TV with Google Home devices or the app. You can change channels or inputs, adjust volume and more

Before setting up the Google Smart Home Service, connect your TV to the network and sign into your VIDAA Account at Home>Account. For more information about how to sign into the VIDAA Account, please refer to Benefits of Smart TV>Using a VIDAA Account in this manual.

STEP 1: Set up Google Smart Home Service on TV

+ Press the Home button on your remote control and select the Settings icon and select System>Voice Service>Google Smart Home. Select Set up now.

+ Sign into your VIDAA account. If you have signed in before, this step will be skipped.

+ Give your TV a name.

STEP 2: Set up in Google Home app

Follow the setup instructions on-screen to set up the

Google Smart Home Service.

+ Download and install the Google Home app on your mobile device, then open the app.

+ Find and select VIDAA Voice service in the app.

+ Follow the instructions in the app to link your VIDAA

account signed in on your TV to your Google Account.

Google Smart Home Service is set up and ready.

Control your smart TV by using your voice through

the Google Home device or App.

+ Google Smart Home Service may not be applicable in some models/countries/regions.

+ The setup steps above may vary. Please refer to the actual product.

Yandex Smart Home Service Setup

Yandex Alice voice assistant can obey certain commandé to help you change the T's configuration

Before setting up Yandex Smart Home Service,

connect your TV to the network and sign into your

VIDAA Account at Home>VIDAA Account. For more

information about how to sign into the VIDAA Account,

please refer to Benefits of Smart TV>Using a VIDAA Account in this manual.

STEP 1: Set up Yandex on TV

+ Press the Home button on your remote control and select the Settings icon, then select System>Voice Service>Yandex. Select Set up now.

+ Sign into your VIDAA account. If you have signed in before, this step will be skipped.

+ Give your TV a name.

STEP 2: Set up in Yandex App

Follow the instructions on the TV to enable Yandex

+ Download the Yandex app on your mobile device.

+ Open the app and sign into your Yandex account.

+ Inthe Yandex app, go to “Devices” > “Smart Home”, click add device icon and select "VIDAA Voice”.

+ Merge Account by signing in to your VIDAAAccount

Yandex Smart Home Service is set up and ready.

Now you can control your Smart TV with Yandex Alice

devices or the Yandex app to change channel, change

inputs, adjust volume and more, just by asking Alice.

+ The Yandex function may not be applicable in some models/ countries/regions.

« The setup steps above may vary. Please refer to the specific product.

Voice Service Other Issues

If you want to tum on your TV with Alexa-enabled

devices (e.g. Echo, Echo show) or Google Home

devices (e.g. Google Home, Google Nest Hub), please:

+ Tum on Wake on LAN and Wake on Wireless Network at Home>Settings>Network.

+ Make sure your TV and Alexa-enabled devices/ Google Home devices are connected to the same network environment.

+ Only Alexa (Alexa skil is enabled) and Google Smart Home Service support tuming on your TV with Alexa Echo or Google Home.

Content Sharing allows you to view media content, like videos, music or photos saved on your Android/iOS/ PC device on your TV screen.

Share Media Content from your Device

+ Connect your TV and Android/iOS/PC device to the same network.

+ Turn on Content Sharing at Home>Settings> System>Mobile Device Connection>Content Sharing

+ Tum on the content sharing function in your Androïd/ iOS/PC device.

+ Find the TV name in the search list of your device and select it. Wait for the connection progress to complete.

+ On your Androïid/iOS/PC device, choose the media content you want to share on your TV.

Play Media Content from your Device on the TV You can connect media content saved on your Androïd/ iOS/PC device to your local network and play the content on your TV.

+ Connect your TV and Androïd/iOS/PC device to the same network.

+ Turn on Content Sharing at Home>Settings> System>Mobile Device Connection>Content Sharing

+ Make sure your media content in your Android/iOS/ PC device are visible through the local network.

+ On your TV, select a device with media content at Home>lnput, or Home>Media.

The media content listed on your Android/iOS/PC

+ Select a media content item from the list to play.

+ Some AndroidiOS/PC devices may not support content Sharing function. If your device does not support content

Sharing, you can download an app that supports the function

40 connect to your TV. For more information, please refer

10 Benefits of Smart TV>Using the Mobile App in this

Content may not be played depending on the file format.

Content may not be played smoothly, or the function may not work properiy due to the network condition

Press the Home button on your remote control. Numerous factory-installed apps are available for you to choose for your entertainment preferences.

Install an App from App Store

Even though your TV has numerous factory-installed

apps, there may be others that you would like to

+ Press the Home button on your remote control and select app store.

+ Use the navigation buttons on your remote control to select the app that you want to install.

+ Select Install. The selected app is installed on the TV.

+ To use this function, your TV must be connected to the Internet.

+ Adding apps is free, but it might cost you money when using some apps. Manage Apps + Onthe Home screen, selectthe app you want to sort, then press and hold the OK button and select Sort + Press the Up/Down/LeftRight directional button to move it. + Press the OK button to store position. Note: + Some Apps may not be moved. Remove an App You can only delete apps that you have installed to the TV. Factory-installed apps cannot be deleted.

+ On the Home screen, select the app you want to remove, then press and hold the OK button and select trash can icon.

+ Select Remove. The selected app is deleted.

Press the Home button on your remote control, and select VIDAA art.

+ Numerous artworks created by global artists presented for you to browse or set as a screensaver.

+ When you select an artwork to browse in full screen mode, press the Left/Right directional button to switch artworks and press the Up/Down/OK button to display detailed information of the artwork. You can communicate with the artist using your mobile device to scan the QR code on the TV screen.

+ Add artworks to your favourite list

Press the Menu button on your remote control to add the selected artwork to your Favourite list

Select the Settings icon in ART to set up Time until the screen saver starts automatically, Picture

switching time, Backlight, and Screen saver selection.

+ This feature may not be applicable in some models/ countries/regions.

Press the Home button on your remote control, and select Browser.

You can enter websites and browse information on the Internet.

Make sure your TV is connected to the network before accessing the Internet via the Browser.

The items listed below will be available on the Browser.

+ Address/Search bar: Enter website you want to visit + Visit/Search button

+ Back and Fonward: switch among webpages

+ Add to Bookmarks/Delete bookmark: Add the website you are viewing to Bookmarks or delete it from Bookmarks

+ Homepage: Back to the Homepage + Reload: Reload the website

+ Add to home: This webpage will appear in the shortcuts on the Home screen.

+ Menu: Change the zoom level of the browser or enter browser settings

+ Tab options: Add/remove webpages, or add private webpages

+ Management bar: Manage websites in Bookmarks

+ Add Website (plus sign): Add websites to Bookmarks

+ Some content in the Browser may not be played properiy.

Data Protection and Security

Press the Home button on your remote control and select Settings>System>Application Settings>- Clear Cache.

Clear cache, user data and temporary filles for browser and applications.

Press the Home button on your remote control and select Settings>System>Application Settings>De- lete Cookies.

Delete cookies for browser and applications.

Press the Home button on your remote control and select Settings>System>Application Settings>Do Not Track.

Send a request to websites not to collect or track your browsing data. Usage Mode Setup

Press the Home button on your remote control and select Settings>System>Advanced Settings>Usage Mode.

Set the TV to use in Home or Store mode. Home Mode Select Home Mode for normal TV usage.

If you want to switch to Store Mode when the TV is in Home Mode, press the Home button to select the Settings icon, then select System>Advanced Settings>Usage Mode and choose Store Mode.

Select Store Mode to setup the TV in a retail setting, This mode enables E-Pos and other demo functions and is only intended for use in retail stores.

When Store Mode is selected, press the Menu button on your remote control to enter store mode settings.

If you want to switch to Home Mode when the TV is in Store Mode, press the Menu button on your remote control to enter store mode settings and choose Home Mode. Alematively, press the Home button and select the Settings icon, then select System>Advanced Settings>Usage Mode and choose Home Mode.

Not + Enabling Store Mode could increase energy consumption.

+ How to exit Store Mode varies depending on models/ countries/regions.

Using the Mobile App

Press the Home button on your remote control and select Settings>Support>Mobile App Download.

Scan the Mobile App download QR code on screen to install the app on your mobile device. ltis a convenient and easy way to control your TV. This app is available on both Android and OS.

To connect to your TV after installing the mobile

+ Agree with end user licence, disclaimer and privacy policies on the TV. If you are not sure whether you have agreed, check by pressing the Home button on your remote control and select Settings>Support>Disclaimer and Privacy>Terms & Conditions, Privacy Policy.

+ Make sure your mobile device and TV are connected to the same network environment.

+ To use this function, switch on Content Sharing by pressing the Home button on your remote control and select Settings>System>Mobile Device Connection>Content Sharing.

+ Open the mobile app and select the TV device you want to connect.

What you can do with the app: + Turn the TV on or off

+ Input characters with your mobile's keyboard

+ Share pictures, music, or videos from your mobile

device to the TV Connecting to External Devices

Connect accessories, such as keyboard, mouse and gamepad, to interact with your Smart TV with ease.

Use HDMI & CEC Use the TV remote to control external devices that are connected to the TV by a HDMI cable. The external devices need to support HDMI & CEC function. Press the Home button on your remote control and select Settings>System>HDMI & CEC.

Connect an external device through HDMI & CEC function

Press the Home button on your remote control and select Settings>System>HDMI & CEC>CEC Control.

Allow HDMI devices to control each other.

+ Set CEC Control to On.

+ Connect a HDMI & CEC compatible device to the TV.

+ Turn on the connected external device. The device will be connected to the TV automatically. After connection is completed, you can access the menu of the connected device on your TV screen using your TV remote and control the device.

+ When CEC control is enabled and HDMI & CEC compatible external devices are tumed off, the TV will enter the standby mode. The function needs to be supported by the external device.

Enable device auto power off

Press the Home button on your remote control and

select Settings>System>HDMI & CEC>Device Auto

Set to On to turn off HDMI & CEC compatible external

devices when the TV is turned off.

Enable device auto power on

Press the Home button on your remote control and

select Settings>System>HDMI & CEC>Device Auto

Set to On to turn on HDMI & CEC compatible external

devices when the TV is turned on.

This feature is applicable when TV input source is pre-

set to the corresponding external device.

Enable TV auto power on

Press the Home button on your remote control and

select Settings>System>HDMI & CEC>TV Auto

Set to On to turn on the TV when HDMI & CEC

compatible external devices are turned on.

+ HDMI cables must be used to connect HDMI & CEC

compatible devices to your TV.

The HDMI & CEC feature of the connected device must

If you connect a HDMI device that is not HDMI & CEC

compatible, the HDMI & CEC control features will not work.

+ Depending on the connected HDMI device, the HDMI & CEC control feature may not work.

The HDMI & CEC feature supports One Touch Play, Routing Control, System Standby, Device OSD Name Transfer, Remote Control Pass Through, Give Device Power Status, System Audio Control.

Control the TV with a Keyboard, Mouse or Gamepad

Connect a keyboard, mouse or gamepad to control your TV with ease.

Connect a USB keyboard, mouse or gamepad

Plug the keyboard, mouse or gamepad cable into the USB port of your TV.

+ Keyboard, mouse, or gamepad connected via USB may not be usable with some apps.

Before connecting a Set Top Box to the TV, make sure the TV and Set Top Box are switched off.

Most STB's can be connected via HDMI, HDMI offers the best picture and sound quality. For more information about how to connect a Set Top Box to your TV, please refer to Connecting to External Devices>Connecting Audio Visual (AV) Devices in this manual.

When the connection is completed, turn on your TV and Set Top Box, switch to the input source by pressing the Home button, then select the Input icon on the Home screen or press the Source button to change to the port that you connected your Set Top Box to.

Connecting a Blu-ray or DVD Player

Before connecting a Blu-ray or DVD player to the TV, make sure the TV and Blu-ray or DVD player are switched off.

It is recommended to connect your devices with a HDMI cable (if HDMI port is available) to enjoy better picture and sound quality. For more information about how to connect a Blu-ray or DVD player to your TV, please refer to Connecting to External Devices>Connecting Audio Visual (AV) Devices in this manual.

When the connection is completed, turn on your TV and Blu-ray or DVD player, switch to the input source by pressing the Home button, then select the Input icon on the Home screen or press the Source button to change to the port that you connected your Blu-ray or DVD player to

Sharing your Smart Phone/Computer

Screen on the TV Before using the feature, please set your TV to the wireless network connection.

Press the Source button on your remote control and select Screen Sharing.

+ Turn on the casting function of your Android/ Windows 10/computer device. The setting icon may vary depending on the device. The feature may be calied “Wireless display", "Smartview", "Wireless projection", etc.

+ Find the TV name in the search list of your device and select it. Wait for the connection progress to complete and the content on your device will be displayed on the TV.

Press the Home button on your remote control,

select Setting>System>Mobile Device Connec-

tion>Screen Sharing and switch it to on. Then, you can share your device's screen directly without opening the Screen Sharing App on your TV.

+ Some devices may not support casting.

+ This function may not be applicable in some models/ countries/regions.

Connecting USB Devices

Connect USB devices, such as hard drives and USB memory sticks for browsing photos or listening to music.

Read before connecting USB devices

USB disk sizes 4GB, 8GB, 16GB, 32GB, 64GB, 128GB and other common market sizes are supported. Up to 8TB hard drives are supported.

Supported formats: NTFS, FAT32.

Select the content you want to play or view. For more information, please refer to Entertainment>Media in this manual

Use the USB storage device function The USB storage device function can be used to record and view digital broadcast programmes.

Read the precautions below before recording or viewing programmes by using the USB storage device function.

Note: + Be sure to select the correct country/region for use.

Use of the recording function may not be applicable depending on the selected country/region. Use with incorrect settings may violate certain laws or other regulations, and may result in criminal punishment. In such cases, our CORPORATION and the Group shall bear no responsibility whatsoever.

Recorded programmes saved on the USB storage device can only be viewed on this TV. They cannot be viewed when connected to another TV (including the same model of TV), & PC, or other devices.

+ You cannot watch one channel while recording another.

the recording time to the USB storage device is too short, no data may be saved.

You cannot record video input signals on the USB device. + Not all types of broadcast may be recordable.

+ After programming the TV to record digital broadcasting, do not disconnect the power plug before recording starts.

video or audio recording fail due to malfunction of the TV or poor reception, no compensation shall be paid.

Certain digital cameras may not be compatible with the TV.

Connecting Headphones

You can connect a pair of headphones (not provided) to the HEADPHONE port on your TV. While the headphones are connected, the sound from the built-in speakers will be disabled.

+ Headphone port may not be available on some model.

+ Headphones with microphones are not supported.

g Audio Visual (AV) De

Connect with a composite video cable

To connect an AV device with a composite video cable {not provided), see the Other Connections section

When the connection is completed, press the Source button on your remote control and select AV as the input source.

+ AVIN por(s) may vary depending on model type.

+ AVINport(s) may not be available on some models. Please use other por(s) to connect AV devices.

+ For some models, RCA Jack to AV cable may not be supplied.

Connect with a HDMI cable

To connect an AV device with a HDMI cable (not

provided), see the Other Connections section

When the connection is completed, press the

Source button on your remote control and select the

corresponding HDMI input

+ Please referto the User Manual of your device for step-by- step instructions.

+ Some devices, such as DVD players, require the HDMI signal to be set to the correct format in the device settings. Please consult your device's user manual for instructions.

+ Hfthere is no sound from your TV. configure the device audio settings.

Connecting Speakers or Other Audio Receivers

To connect speakers or other audio receivers with an audio cable (not provided), see the Other Connections section.

Ensure the audio connected devices are switched on before switching on the TV.

When the connection is completed, press the Home

button on your remote control, select Settings>-

Sound>Speakers>Audio Output and select the

When a digital audio system is connected to the

DIGITAL AUDIO OUT port, decrease the TV volume

and use your digital audio system to control the volume.

+ If you prefer to use Audio Return Channel (ARC) or enhanced Audio Return Channel (eARC), please refer to Connecting to External Devices>Connecting à Digital Audio System with ARC/eARC in this manual.

+ You can connect the DIGITAL AUDIO OUT port on the back of the TV to the coaxial port on the amplifier. Then press the Home button on your remote control and select Settings>Sound>Speakers>Digital Audio Out to choose Dolby Audio - Dolby Digital to receive the Dolby Digital audio.

Connecting a Digital Audio System

with ARC/eARC If you would like to use the Audio Retum Channel (ARC) or enhanced Audio Return Channel (eARC) feature to send sound from the TV by a HDMI cable to a digital sound system, you can connect it to the HDMI (ARC/EARC) port of your TV.

By using this feature, you can also control the sound system with your TV remote instead of using the remote controls from the connected devices.

After the connection:

+ Power on the sound system.

+ Press the Home button and selectthe Settings icon on the Home screen

+ Select Sound>Speakers>Audio Output, and choose ARC option. If the device supports eARC function, press the Home button and select the Settings icon on the Home screen, then select Sound>Speakers>eARC to set ARC to On.

+ Audio receiver must support ARC/eARC function.

+ Ifthe device has an Input Selector feature, then make sure

When this por is used for ARC/2ARC function, it can be used

s signal input when & DVD is connected to an amplifier and

the amplifier is connected to the TV atthe same time. Some

amplifers may not support series connection.

+ 6.1 CH (channel) audio is available when the TV is connected to an extemal device that supports 5.1 channel surround sound. You can press the Home button and select the Settings icon on the Home screen, and select Sound>Speakers>Digital Audio Output to choose Dolby Audio - Dolby Digital Plus to receive the 5.1 channel audio.

Connecting a PC You can connect a PC to the TV with a HDMI cable to use your TV as a PC monitor.

After connecting the PC, press the Source button and select the connected PC as the input source.

+ For better image quality, set the PC'S resolution to a format which is supported by the TV.

+ ffthere is no sound from your TV, change the PC's audio settings.

+ f you want to connect your PC and TV wirelessiy, please refer to Benefits of Smart TV>Content Sharing or Connecting to Extemnal Devices>Sharing your Smart Phone/Computer Screen on the TV in this manuel.

Picture Adjust picture mode, picture size and other advanced picture settings.

Choose a Picture Mode

Press the Home button on your remote control and select Settings>Picture>Picture Mode.

Select a pre-set picture mode to best suit the content you are viewing Note:

+ Options may differ depending on your model/country/ region and the content you are watching. Please refer to the specific product.

When you use a normal signal

Standard: Use Standard mode for watching normal content, such as News, Drama or Documentaries.

Cinema Day: Use Cinema Day for watching movies in a bright environment.

Cinema Night: Use Cinema Night for watching movies in a dark environment.

Dynamic: Use Dynamic mode for content that requires vivid picture quality.

Sports: Optimised picture for watching sports.

Change the Aspect Ratio Press the Home button on your remote control and select Settings>Picture>Aspect Ratio.

Adjust the Aspect Ratio to stretch or zoom the picture. Auto: Automatically switch Aspect Ratio between 16:9 and 4:3 based on the signal information:

16:9: Best suited for 16:9 Widescreen content. This will also stretch 4:3 content to Widescreen.

4:3: Best suited for 4:3 content. 21:9: Best suited for 21:9 content, generally used in game scenarios.

Movie Zoom: Fill the entire screen by zooming in to remove horizontal black bars from the top and bottom of the picture.

Dot to Dot: Displays the native signal without any scaling

+ The options above may not be applicable in some input sources.

+ Using special functions to change the size of the displayed image (e.g. changing the height/width ratio) for the purpose of public display or commercial gain, may infringe on copyright laws.

+ Ifthe aspect ratio of the selected format is diferent from the TV transmission or video content, it can distort the picture.

+ When connecting a PC to the TV via HDMI input, fast moving images may become distorted.

Press the Home button on your remote control and select Settings>Picture>Smart Scene.

Smart Scene will enable your TV to continually

recognise the scene and enhance the picture quality

on all input sources.

+ Some specific applications have explicit constraints meaning content recognition is not allowed.

+ This function may not be applicable in some models/ countries/regions.

Advanced Picture Settings Setup

Press the Home button on your remote control and select Settings>Picture>Picture Mode Settings.

Adjust display settings for each Picture Mode. You can personalise the picture quality by adjusting the following settings. Options may not be applicable depending on your model/country/region and the picture mode you selected.

Apply Picture Settings: Apply current picture mode settings to all the input sources or just the current source

Backlight: Set the overall brighness of the screen. Note:

+ The function name may vary depending on the model type. The following option may differ depending on model type, please refer to the actual product. Dynamic Backlight Control Enhance the contrast ratio between light and dark areas of the picture. This function may not be applicable in some models/ countries/regions. Backlight Adjust how bright you want images to appear, lower settings create darker images. This function may not be applicable in some models/ countries/regions. Automatic Light Sensor TV will automatically adjust the picture settings according to the amount of ambient light in the room This function may not be applicable in some models/ countries/regions. Light Sensor Shift This feature is adjustable only when Automatic Light Sensor is turned on. If the picture is too bright, decrease the value. Ifthe picture is too dark, increase the value. This function may not be applicable in some models/ countries/regions. Local Dimming (or Peak Brightness Dynamic Range for some models) TV will automatically adjust the backlight in specific areas of the screen according to the contrast changes in the image. This function may not be applicable in some models/ countries/regions. Brightness: Adjust the Brightness level to generate lighter or darker images. Contrast: Adjust the Contrast level to increase or decrease how bright images appear. Colour Saturation: Adjust the colour intensity of the picture for a more vibrant image. Sharpness: Adjust how sharp or soft the edges of images appear. Adaptive Contrast: Automatically adjust dark areas and light areas of the image to see more detail. Ultra Smooth Motion: Reduce the afterimage effect when viewing fast-moving objects. This function may not be applicable in some models/ countries/regions. Clear Motion: Reduce judder and blur from video content. This function may not be applicable in some models/ countries/regions.

Noise Reduction: Improve the picture quality by reducing noise.

MPEG Noise Reduction: Reduce MPEG block noise to provide clearer edge transitions.

Colour Temperature: Adjust how warm (red) or cool blue) the white areas of an image appears.

Expert Settings: Adjust advanced picture settings based on your viewing preference.

Overscan: Change the video size setting to crop the edges of the displayed image.

This function may not be applicable in some models/ countries/regions.

Reset Current Mode: Restore allthe picture settings in the current picture mode to the factory default values.

Expert Settings Setup

Press the Home button on your remote control and select Settings>Picture>Picture Mode Settings>- Expert Settings.

Adjust the colour space and Gamma to best suit the content you are viewing. Options may notbe applicable depending on your model/country/region and the picture mode you selected.

Colour Gamut: Change the range of colours the TV displays.

This function may not be applicable in some models/ countries/regions.

Colour Tuner: Adjust the Hue, Saturation and Brightness of colour settings.

White Balance: Adjust the intensity of red, green and blue to view the true colour of all images in the picture

Black Level: Adjust the HDMI Black Level to enhance current content.

Gamma Adjustment: Adjust the Gamma to alter how the TV will respond to greyscale content. In low ambient light choose a higher number, in brighter ambient light select a lower number. The default setting of 2.2 is recommended for most ambient light conditions.

This function may not be applicable in some models/ countries/regions.

Gamma Calibration: Adjust selected Gamma curve This function may not be applicable in some models/ countries/regions.

Viewing Angle: Provide a better viewing experience when watching TV from anywhere in the room.

This function is only available in models supporting the Viewing Angle Control feature.

RGB Oniy Mode: RGB filter for adjustment and control of colour space and colour saturation

Low Blue Light: Eye care: reduce the emission of blue light

This function may not be applicable in some models/ countries/regions. Sound

Adjust sound mode and other advanced sound settings.

Press the Home button on your remote control and select Settings>Sound>Sound Mode.

Select a pre-set sound mode to suit the content you are listening to.

Standard: In Standard mode, the TV delivers a flat frequency response, which preserves the natural characteristics of the original sound

Theatre: Theatre mode increases the surround sound effect and provides a more prominent bass response.

Music: In Music mode, low and high frequencies are emphasised to enhance musical instrument reproduction.

Speech: In Speech mode, low and high frequencies

are attenuated to improve the reproduction and clarity of the human voice.

Late Night: In Late Night mode, the TV will improve the reproduction and clarity of the human voice with a low volume level.

Sports: Optimised sound for watching sports events. Note: + Options may differ depending on your model/country/

region and the content you are watching. Please refer to the specific product.

Sound Mode Settings Setup

Press the Home button on your remote control and select Settings>Sound>Sound Mode Settings.

Adjustthe audio settings ofthe TV. You can personalise the sound quality by adjusting the following settings.

Apply Audio Settings: Adjust current sound mode to apply to all sources or just the current source.

Total Sonics: Optimise the overall sound quality by increasing bass and widening the sound field to provide a clear, natural dialogue.

This function may not be applicable in some models/ countries/regions.

Total Volume: Maintain a consistent loudness level for a wide dynamic range of programmes, loud commercials and channel or input changes.

This function may not be applicable in some models/ countries/regions.

Total Surround: Provide surround sound experience with psycho-acoustic processing to place sounds at the side, behind and above the viewer. For best results use with Total Sonics.

This function may not be applicable in some models/ countries/regions.

Bass Boost: Bass Boost uses DTS TruBass"” to enhance the perception of bass frequencies to provide deep, rich bass response from the TV's internal speakers.

This function may not be applicable in some models/ countries/regions.

Surround Sound: Surround sound uses DTS Virtual:X to deliver an immersive surround sound experience from the TV's internal speakers.

This function may not be applicable in some models/ countries/regions.

Dialogue Clarity: Dialogue Clarity uses DTS Dialog Clarity" to boost the frequency range of the human voice so dialogue is clearly understood and heard above audio or surround effects.

This function may not be applicable in some models/ countries/regions.

TruVolume: Automatic control over large volume changes while watching TV programmes or films, providing a more comfortable and consistent volume.

This function may not be applicable in some models/ countries/regions.

Equalizer: Boost the volume at different frequencies. This function is only applicable when TV Speaker is selected at Home > Settings > Sound > Speakers > Audio Output.

Subwoofer: Enable / Disable inteal subwoofer. This function may not be applicable in some models/ countries/regions.

Bass Boost Value: Built-in bass adjustment.

This function may not be applicable in some models/ countries/regions.

Wall Mount Setup: Automatically optimise the sound based on the position of the TV.

This function may not be applicable in some models/ countries/regions.

Auto Volume Control: Activate to prevent the volume from changing when switching TV channels.

This function may not be applicable in some models/ countries/regions.

Reset Current Mode: Restore all ofthe audio settings inthe current audio mode to the factory default values. Note:

+ Some models may not support decoding of DTS CD bitstreams. Playback ofthis format may produce undesirable noise.

Press the Home button on your remote control and select Settings>Sound>Speakers.

Adjust the settings of speakers. Audio Output

Select the speakers which you want to use.

Digital Audio Output

Select the digital audio output format that best suits the audio device type.

Auto: the audio device automatically outputs in a supported format.

Pass Through: the audio device outputs without any processing.

PCM: the audio device outputs PCM (pulse code modulation) format.

Dolby Audio - Dolby Digital: the audio device outputs Dolby Digital audio when connected to the TV via the coaxial port.

Dolby Audio - Dolby Digital Plus: the audio device outputs Dolby Digital Plus audio when connected to the TV via the HDMI (ARC/ARC) port.

Not + Thisfunctionisonly applicable when Home>Settings>Sound >Speakers>Audio Output is set to ARC or SPDIF Only.

+ When external audio devices are connected to the TV

via coaxial, PCM and Dolby Audio - Dolby Digital are recommended.

Digital Audio Delay Adjust the digital audio output delay time to sync audio from an external speaker with the images on the TV. Not

+ This function is only applicable when Home>Settings> Sound>Speakers>Audio Output is set to ARC or SPDIF Onty.

Lip Sync Synchronise the video and audio. Note:

+ This function may not be applicable in some Audio Output modes.

Adjustthe left and right speaker level to optimise audio

for a specific location:

+ This function may not be applicable in some Audio Output modes.

eARC Connect an audio device that supports eARC via

HDMI (eARC) and set eARC to On to enjoy higher

sound quality. This feature is available to set when

Home>Settings>Sound>Speakers>Audio Output

+ This function may not be applicable in some models/ countries/regions.

When a soundbar device is connected to the TV, you

can change the Sound Bar Settings via the Settings

menu for best device audio quality.

When an ARC device is connected to the TV, the sound

output is automatically switched to ARC. If the user

switches to other sound output channels, the soundbar

menu cannot be adjusted but the sound menu of TV

Press the Home button on your remote control and

select Settings>Sound>Sound Bar Settings.

When you connect a soundbar with a HDMI cable,

you should Set CEC Control to On by pressing the

Home button on your remote control, then select

Settings>System>HDMI & CEC>CEC Control.

EQ Modes: You can select Music, Movie, News,

Surround Modes: You can set to On to turn on the

Bass Level/Treble Level/Dimmer Level: You can

adjust Bass Level/Treble Level/Dimmer Level

Reset: Reset current Sound Bar Settings to factory

+ This function is only applicable for the specific soundbar wpes.

Network You can get access to the Internet through your TV. Check the Internet Connection Status

Press the Home button on your remote control and select Settings>Network>internet Connection.

Test the current network connection status and view the current network information.

Press the Home button on your remote control and select Settings>Network>internet Connection>- Connection Test.

Start a network connection test.

Pressthe Home button on yourremote control and select Settings>Network>internet Connection>Network Information.

View information about your network connection. Turn on the TV through the Internet Wake on Wireless Network

Press the Home button on your remote control and se- lect Settings>Network>Wake on Wireless Network.

With a wireless network connection and enabling Wake

on Wireless Network, you can switch on the TV from

standby and push content to be viewed on the TV with a

mobile device App supporting the screencast function

+ To use this function, make sure your TV and mobile device are connected to the same network environment.

+ Enabling this function may result in higher energy consumption.

+ This function may not be applicable in some models/ countries/regions.

Wake on LAN Press the Home button on your remote control and

select Settings>Network>Wake on LAN With a wired Ethernet connection and enabling Wake on LAN, you can switch on the TV from standby and push content to be viewed on the TV with a mobile device App supporting the screencast function

+ To use this function, make sure your TV and mobile device are connected to the same network environment.

+ Enabling this function may result in higher energy consumption

+ This function may not be applicable in some models/ countries/regions.

General You can set up system settings. Note:

+ The menus displayed vary depending on models/countries/ regions.

Set Time Press the Home button on your remote control and select Settings>System>Time.

Set the current time based on your location:

Time Format: Set the time display to be 12 or 24- hour format.

DatelTime: Set the Date and Time. You can set the date and time to automatically sync with Internet/ broadcast or manually setup by yourself.

This function may not be applicable in some models/ countries/regions.

Time Zone: Select your time zone.

This function may not be applicable in some models/ countries/regions.

Daylight Saving: Select whether to apply Daylight Saving Time to the TV.

This function may not be applicable in some models/ countries/regions.

Use Timer Press the Home button on your remote control and select Settings>System>Timer Settings. Adjust the timer settings to suit your preference. Sleep Timer: Setthe sleep timer to automatically turn the TV off at the specified time. Power On Timer: Setthe time you want the TV to turn on automatically. You can set the same time each day or set a different time on different days. Power Off Timer: Setthe time you want the TV to turn off automatically. You can set the same time each day or set a different time on different days. Menu Timeout: Set the amount of time you would like the menu to remain on the screen. Auto Sleep: Setthe amount of time that you would Ike the TV to auto power of after a period of no activity. This function may not be applicable in some models/ countries/regions. Auto Standby with No Signal: TV will go to standby ifthere is no signal after the set time.

Use System PIN Press the Home button on your remote control and select Settings>System>System PIN Change the PIN that you use to access Parental Control, Auto Channel Scan and Reset to Factory Default.

Use Parental Control

Press the Home button on your remote control and select Settings>System>Parental Control

Tum on Parental Controls to prevent children from being able to view certain content.

Set Language and Location

Press the Home button on your remote control and select Settings>System>Language and Location Select the language used forthis TV and your location.

Location: Choose the location from where you will watch your TV.

Postcode: User can change the Postcode. This function may not be applicable in some models/ countries/regions.

Menu Language: Set the default language for the TV menu

Primary Audio: Set the default audio output language for the type of digital broadcast content that you are viewing.

Secondary Audio: Set the secondary audio output language for digital broadcast content.

Digital Teletext: Adjust Teletext decoding

Press the Home button on your remote control and select Settings>System>Voice Service.

Use your voice to control the TV, other smart home devices and more.

Set Application Settings

Press the Home button on your remote control and select Settings>System>Application Settings.

Setup Application preferences. Mobile Device Connection

Press the Home button on your remote control and select Settings>System>Mobile Device Connection

Connection management of a mobile device, smartphone, or personal computer.

Use HDMI & CEC Press the Home button on your remote control and select Settings>System>HDMI & CEC.

Configure how to control CEC-enabled devices with your TV remote.

Press the Home button on your remote control and select Settings>System>Advanced Settings.

Access the Advanced Settings menu.

TV Name: You can edit the name for your TV to be used on the network.

Note: Up to 18 characters can be entered.

PVR & Timeshift: Format the external USB disk to support PVR and Timeshift.

Default Startup Page: Set the page that first appears when the TV is powered on.

Screensaver: Activate a screensaver when your TV displays a stil image for a period of time. Set the time according to your preference.

Note: This function may not be applicable in some models/ countries/regions.

Input Labels: Edit the external input labels. Enhanced Viewing Settings: VIDAA offers an Enhanced Viewing Service, which uses Automatic Content Recognition (*ACR") technology to collect certain data from this Smart TV, including this Smart TVSs identifier, IP address, and viewed content and ads information (together "Viewing Data"). To learn more about each Enhanced Viewing Service feature, you may select any of the settings on the screen for a description. Your settings can be changed at any time in the Smart TV's "Settings" menu

Sports Mode Auto Detection: Enable auto detection of Sports content allowing TV to automatically select Sports mode in Sound and Picture settings.

Power On Mode: The TV will turn on in the selected mode when the main power is reconnected

Personalised Ads: Turning off personalised ads will limit the ability to deliver relevant ads to you but will not reduce the number of ads you receive.

Note: This function may not be applicable in some models/ countries/regions.

Usage Mode: Select Home mode or Store mode. Switch off Curtain: Set how quickly the screen Curtain will close when entering standby.

Power Indicator Mode Setup

Press the Home button on your remote control and

select Settings>System>Advanced Settings>Power Indicator.

Set the power indicator display to stay On or Off when in Standby mode.

Press the Home button on your remote control and select Settings>System>Advanced Settings>indi- cator Light Setting.

Set the indicator light from Power, Always or Off.

Note: The above functions may not be applicable in some models/countries/regions.

Support You can set up support settings. Note:

+_ The menus displayed vary depending on models/countries/ regions.

Show the signal information of current input. Check Network Connection Status

Press the Home button on your remote control and select Settings>Support>System Info>Network Connection Status.

View the TV's network connection information. Check Input Connection Status

Press the Home button on your remote control and select Settings>Support>System Info>input Con- nection Status.

View the TV's input connection information. Check Software Version

To check the current software version and hardware version of your TV, press the Home button on your remote control and select Settings>Support>System Info>Version.

Press the Home button on your remote control and

select Settings>Support>Self Diagnosis.

Perform self diagnosis to test sound, picture and

Network Connection Test: Perform this test to check

the network connection.

Network Speed Test: Perform this test to check the

Input Connection Test: Show all external input

Status Check: Check the status ofthis TV by showing

Press the Home button on your remote control and

select Settings>Support>E-Manual.

Launch the E-Manual and learn more about your TV.

Press the Home button on your remote control and

select Settings>Support>System Upgrade.

Set your TV to receive the latest firmware.

Auto Firmware Upgrade: Set your TV to automatically

receive the latest firmware.

Check Firmware Upgrade: Check to ensure that your

TV has received the latest firmware.

Please ensure your TV is connected to the Internet.

Check OAD Upgrade: Check to ensure that your TV

has received the latest firmware via the tuner.

+ Please ensure your TV is connected to the Internet.

+ This function is only applicable when Thailand and Malaysia are selected in Location.

System App Auto Upgrade: Set your system

applications to automatically upgrade to the latest

version. App auto upgrade will be completed in the

background. Confirmation on new Privacy Notices may

be required to complete any upgrades.

Upgrade from USB: Upgrade TV software from USB

+ Please ensure the USB flash drive is inserted to the USB 2.0 port ofthe TV.

+ The update files must be located in the root directory ofthe update USB device.

+ The format ofthe USB must be FAT32 and the partition table type must be MER.

Press the Home button on your remote control and select Settings>Support>Disclaimer and Privacy>-

Data Sharing, Privacy and EULA Read the Disclaimer Details and Data Protection Policy. Allow/Deny your consent to the listed polices relating to the collection of User/Network data.

Press the Home button on your remote control and select Settings>Support>Disclaimer and Priva- cy>Open Source License.

Display Open Source Software licence information.

Press the Home button on your remote control and select Settings>Support>Disclaimer and Priva- cy>Remove User Data.

To remove any usage data from the local TV and Cloud storage, select Remove User Data. Mobile App Download Press the Home button on your remote control and select Settings>Support>Mobile App Download. Install mobile app on your smartphone to control your TV. This app is available on both Android and iOS. Reset to Factory Default

Press the Home button on your remote control and select Settings>Support>Reset to Factory Default.

Restore your TV to the factory default Check the TV Running Time

You can access the Status Check page to view the running time of your TV.

+ While in an input source, such as Live TV, HDMI and AV, press the Menu button to launch the quick menu.

+ Under the quick menu, press and hold the Blue button, the Status Check page will appear on screen for you to check the TV running time.

+ This feature may not be applicable in some models/ countries/regions.

Using Parental Controls Press the Home button on your remote control and select Settings>System>Parental Control.

Turn on Parental Controls to prevent children from being able to view certain content.

If you have not set the PIN code before, create and confirm PIN window wil| be displayed. Using the D-pad on the remote, create the PIN code.

If you have set the PIN code before, Enter PIN window will be displayed.

Locks Tu on Locks to enable the Parental Control function.

You will see other Parental Control settings change from a greyed out state to highlighted. When this oceurs, Block Time, Channel Block, Content Block, Input Block, App Block, Website Block or Reset to Default features are available to set.

Block Time: Block channels and programmes during certain periods of time.

Channel Block: Block all or individual channels when you turn on the Parental Control feature.

Content Block: Certain programmes are blocked when you activate the Parental Control settings. This is controlled by the broadcaster.

Input Block: Block content from devices that are connected to external inputs.

App Block: Block access to certain apps. lfan appthat you want to restrict does not appear here then check he Parental Control settings in the app.

Website Block: Set the range of URLS that the browser can access.

Reset to Default: Restore Parental Control back to the factory default setting.

Reset to Factory Default

Press the Home button on your remote control and select Settings>Support>Reset to Factory Default

Restore your TV to the factory default. Reset will clear your personal settings, information and data. Enter the PIN code on-screen to enable the Factory Reset

Connect your game console and adjust the settings to optimise the TV screen for better gaming entertainment. Connect a Game Console

You can connect your game console with a HDMI cable to the TV.

To start a game from a game console: + Switch on your game console.

+ Pressthe Source button. Selectthe connected game console as the input source.

You can enable the game mode to optimise your TV's settings when playing games with a game console. Game Mode

Press the Home button on your remote control and select Settings>Picture>Game Mode.

Enable Game Mode to optimise the TV's settings to

enjoy a better gaming experience with a PC or a game console connected to the TV.

Game Mode will allow

+ Reducing input lag to make sure every press or click matches what is happening on the screen:

+ Improving responsiveness to produce very little motion blur:

+ Processing YUV 4:4:4 format signals precisely to present accurate image colours.

+ This function may not be applicable in some input sources. or applications.

Sports Sports mode setup in picture or sound settings

Press the Home button on your remote control and select Settings>Picture>Picture Mode>Sports.

Optimised picture for watching sports.

Press the Home button on your remote control and select Settings>Sound>Sound Mode>Sports.

Optimised sound for watching sports events. Sports Mode Auto Detection

Press the Home button on your remote control and select Settings>System>Advanced Settings>Sports Mode Auto Detection.

When enabled, any sports programmes will automati-

cally switch to Sports mode for both Sound Mode and

+ This function may not be applicable in some models/ countries/regions.

+ Tuming on this function could increase energy consumption.

Press the Home button on your remote control and select Media.

Media is a central location for you to view or listen to different types of content, such as photos, music and movies. You can view media content through the following methods:

+ AUSB thumb drive or hard drive.

+ Compatible mobile phone, tablet or other personal devices: you can stream movies, music and photos that are stored on compatible personal devices and play or view the content on your TV.

By default, there is Content Sharing displayed on the Media screen. If your mobile device is connected to the TV, its name also appears on the Media screen:

For more information about Content Sharing, please

refer to Benefits of Smart TV>Content Sharing in this manual

Enjoy Photos/Au Device

Video Stored on a USB Press the Home button on your remote control and

select Media>AIl Devices.

Select the content you want to play on the screen, like

pictures, videos and music.

The items listed below will be available on the media

+ Search bar: Search the content you want to play.

+ View style: Arrange the content list by Grid, List.

+ Sort: Sort the content list by Name, Date Modified, Size.

+ Filter: Filter the content list by All Media, Photo, Video, Music, Recorded.

+ Arrow: When the focus is on the first column, there will be an arrow on the left side. Select the arrow to enter multiple storage sources.

You can also press the Menu button to create a photo,

music, or video playlist.

+ Some options listed above may not be available in some models/countries/regions.

+ You must obtain any required permission from copyright owners to download or use copyrighted content. We cannot and dont grant such permission.

Play Background Music while Vie: Pictures

+ Choose a picture to display.

+ Press the Up/Down button to display control bar.

+ Select Background Music and choose your music to create a Music Playlist.

Now you can play background music while viewing

Due to differences in programming tools and other factors, some of the file formats that are listed may not be

The listed formats may not be supported depending on the model.

Due to differences in programming tools and other factors, some of the file formats that are listed may not be

Due to differences in programming tools and other factors, some of the file formats that are listed may not be supported

The listed formats may not be supported depending on the model.

Container Video Codec File Extension Name | Resolution and Frame MPEG Mpeg1/2 mp9 mpeg vob 1920 x 1080p @ 120fps Mpegé MP4 Mpeg4 mp4 mov 1920 x 1080p @ 120fps H.264(AVC) 1920 x 1080 p @ 60fps H.265(HEVC) MKV Mpeg1/2 mkv 1920 x 1080p @ 120fps Mpegé H.264(AVC) 1920 x 1080p @ 60fPs H.265(HEVC) AVI Mpeg1/2 avi 1920 x 1080p @ 120fps Mpeg4 PESTE 1920 x 1080p @ 60fPs WMV WMV3 ast wmv 1920 x 1080p @ 60fPs H.264(AVC) FLV H.264(AVC) fv 1920 x 1080p @ 60ps TS H.265(HEVC) 5 1920 x 1080p @ 60ps

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENCE FOR THE PERSONAL USE OF ACONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (‘AVC VIDEO") AND/OR (if) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN À PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM À VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENCE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,

Accessibility Features

Accessibility Menu Setup Provide menu options to aid the visually or hearing impaired.

Press the Home button on your remote control and select Settings>Accessibility>High Contrast Menu Improve contrast for the visually impaired.

Press the Home button on your remote control and select Settings>Accessibility>Menu Transparency. Select menu transparency from Off, Medium, High

Note: The above functions may not be applicable in some models/countries/regions.

Audio Type Setup Provide audio description to aid the visually impaired

Press the Home button on your remote control and select Settings>Accessibility>Audio Type.

Audio Type: Accessibility audio settings. Audio Format: Select the audio format

Fader Control: Provide the best sound quality options for the visually impaired.

Note: The above functions may not be applicable in some models/countries/regions.

Press the Home button on your remote control and select Settings>Accessibility>Dialogue Enhance- ment.

Enable or disable dialogue enhancement.

Note: This function may not be applicable in some models/ countries/regions.

Subtitle Setup Adjust Subtitle Settings for digital broadcast content.

Press the Home button on your remote control and select Settings>Accessibility>Subtitle Settings.

Subtitle: Enable Subtitle type. Primary Subtitle: Setthe default subtitle language for digital broadcast content.

Secondary Subtitle: Set the secondary subtitle language for digital broadcast content.

Channel Subtitle Storage: Enable the storage of subtitie settings per channel

Note: The above functions may not be applicable in some models/countries/regions.

For the visually impaired.

Press the Home button on your remote control and select Settings>Accessibility>Accessible Guide. Off, Freeview Accessible Guide and Large Font Guide options are available:

Note: This function may not be applicable in some models/ countries/regions.

Screen Magnification Press the Home button on our remote control and se- lect Settings>Accessibility>Screen Magnification

Allow visually impaired/partially sighted viewers to magnify an area of the screen.

+ This function is only applicable for some scenarios.

+ This function may not be applicable in some models/ countries/regions.

Provide Voice Guide Settings for Menu Audio. Volume, Language, Rate, Pitch and Focus Voice Guide options are available.

Press the Home button on your remote control and select Settings>Accessibility>Voice Guide

Note: This function may not be applicable in some models/ countries/regions.

FAQ In this section you will find the answers to the most frequently asked questions.

There is no picture, or the picture is black and white.

+ Check input cable connections.

+ Unplug the TV power cord from AC outlet and re-plug after 60 seconds.

+ Check if the Colour Saturation is set to 50 or higher at Home>Settings>Picture>Picture Mode Set- tings>Colour Saturation

No sound or the souni

There is no sound or the sound is too low at maximum volume.

+ Check if Mute mode is set to on.

+ Check the volume settings.

+ Check the volume control of the device (cable or satellite box, DVD, Blu-ray, etc.) connected to your TV.

+ Make sure that the audio cable is connected to the correct audio output connector on the external device.

+ Check whether TV Speaker is selected at Home>- Settings>Sound>Speakers>Audio Output.

My TV cannot connect to the network.

+ Check network status at Home>Settings>Support> System Info>Network Connection Status.

+ Make sure your modem/wireless router is on and connected to the Internet.

+ Position your wireless router, modem router, or access point in a central location. Avoid putting it in a corner.

External source connected but no picture or sound.

1 have connected an external source to my TV but |

get no picture and/or sound.

+ Check whether the connection between the external device and your TV is correct and secure.

+ Make sure you have made the correct selection of input source.

+ Ifthe signal is intermittent, unplug the TV power cord from AC outlet and re-plug after 60 seconds.

When devices are connected with HDMI cables

+ If there is always no signal, or the signal cannot be restored after plugging and unplugging, you can access Home>Settings>System>HDMI & CEC>HDMI Format, to confirm whether the signal can be recognised.

+ Change to another HDMI port.

+ Change to another HDMI cable.

The remote control does not work.

+ Confirm that TV still has power and is operational Press the control button on the TV to determine ifthe problem is with the remote control or not.

+ Ifthe TV is notresponding to the remote control, then please check if the small light on the remote control flashes when any button is pressed (some remote controls do not support this function).

+ If the small light does not flash when the remote control button is pressed, the battery power may be low, please replace the batteries with new ones.

+ Check that the orientation of each battery matches the positive (+) and negative (-) symbol in the battery compartment.

+ Keep the remote control sensor area clear from obstacles.

Schedule Recording cannot be used.

+ Check if there is a storage device connected to the TV.

+ Check the free space of the storage device. The function will not work if there is not enough storage space on the device.

+ Check whether your storage device is damaged. If so, it is suggested to format your storage device.

+ Recording will automatically stop if the signal becomes too weak.

+ Recording function may not work if the readhwrite speed of the USB device is too slow.

+ Recording function may not work because the storage format of your device is unsupported.

+ The Recording functions may not be applicable in some models/countries/regions.

Press the Home button on your remote control and select Settings>Support>Self Diagnosis

When the TV malfunctions, you can perform some self-diagnosis to find the problem

Network Connection Test

When performing a Network Connection Test, the test will confirm whether your TV is connected to a network viathe TV screen. Ifthe network test is successful but you still have problems using online services, please contact your Internet provider.

Network Speed Test Test the speed with a third-party website. Input Connection Test

When performing an Input Connection Test, you can select from the input sources and check related information with external connections.

When performing a Status Check, the status of your TV will be displayed showing any error codes.

Remote Control Service Press the Home button on your remote control and select Settings>Support>Remote Control Service.

Remote Control Service enables your TV to be controlled from the client server to allow service agents to diagnose the problem of your TV and deal with the problem online efficientiy.

To use this function: + Turn on Remote Control Service.

+ Select Agree AÏI and Confirm in End User Licence Agreement page.

+ Select Generate PIN in Remote Control Service.

+ You can initiate a help request to a service agent by the hotline and provide the on-screen PIN.

+ This function may not be applicable in some models/ countries/regions.

+ Steps above may vary. Please refer to the specific product.

+ Keep the network connected when the Remote Control Service is running

Fuly integrated digital terrestral-cable TV (OV8-T-C)

Channel Indicator On Screen Display 75 Ohm (unbalanced)

Audio German+Nicam Stereo

‘Audio Output Power (WRMS.) (10% THD)

Power Consumption {W)

Power Consumption (W) | “2

Display 32" Operation temperature | 0°C up to 40°C, 85% and operation humidity | humidity max

The Wireless LAN equipment is intended for home and office use in all EU countries, the UK and Northern Ireland (and other countries following the relevant EU and/or UK directive). The 5.15 - 5.35 GHz band is restricted to indoor operations onlyin the EU countries, in the UK and Northern Ireland (and other countries following the relevant EU and/or UK directive). Public use is subject to general authorisation by the respective service provider.

Country Restriction | fussian Indoor use onf Federation y

The requirements for any country may change at any time. Its recommended that user checks with local authorities for the current status of their national reg- ulations for both 2.4 GHz and 5 GHz wireless LAN's.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licens- ing Administrator, Inc.

Manufactured under licence from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate licence(s) from Microsoft.

Content owners use Microsoft PlayReady" content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade

The “CI Plus” Logo is a trademark of CI Plus LLP. This productis protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a licence from Microsoft or an authorised Microsoft subsidiary.

These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at its end-of-lfe. Instead, the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment, recovery and recycling in accordance with your national legislation and the Directive 2012/19/EU and 2013/56/EU.

By disposing of these products correctly, you will help to conserve natural resources and will help to prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of these products.

For more information about collection points and recycling of these products, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

If you wish to dispose of this product, please contact your supplier and check the terms and conditions of the purchase contract.

[Other Countries outside the European Union] These symbols are only valid in the European Union Contact your local authority to learn about disposal and recycling.

The product and packaging should be taken to your local collection point for recycling.

Some collection points accept products free of charge.

Note: The sign Pb below the symbol for batteries indicates hat this battery contains lead.

nl 1. Products 2. Battery

WARRANTY CONDITIONS This product is guaranteed against faults caused by defects in manufacturing or the

materials used for a period of two years, starting from the date of purchase.* This jarranty does not cover defects or damage caused by failure to install the device

correctlÿ, incorrect use of the proc xcessive wear and tear.

*proof of purchase required

CONDITION DE GARANTIE Ce produit est garanti pour une période de 2 ans à partir de La date d'achat*, contre toute défaillance résultant d'un vice de fabrication ou de matériau. Cette garantie ne ouvre pas Les vices ou les dommages résultant d'une mauvaise installation, d'une utilisation i e ou de l'usure anormale du produit

Hereby, ELECTRO DEPOT declares that this device is in compliance with the essential requirements and EN other relevant provisions of Directive 2014/53 / EU. The declaration of conformity can be consulted on the site: http://www electrodepot fr/sav/notices