BCH160B-I - Electric heating BIONAIRE - Free user manual and instructions
Find the device manual for free BCH160B-I BIONAIRE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | BIONAIRE |
| Model | BCH160B-I |
| Product type | Fan heater |
| Power supply | Mains 230 V ~ 50 Hz |
| Maximum power | 1800 W (high heat) |
| Minimum power | 1200 W (low heat) |
| Maximum current | 8,2 A |
| Operating modes | Fan only, low heat, high heat |
| Thermostat | Adjustable, with frost protection setting (5°C) |
| Safety | Automatic overheating shut-off, frost protection |
| Indicator light | Power-on indicator |
| Maintenance | Clean the exterior with a damp cloth; vacuum the air vents at least 2 times per year |
| Warranty | 2 years |
| Spare parts and repairability | Not user-repairable; contact Holmes customer service |
| Placement instructions | Flat horizontal surface, minimum distance: 50 cm on sides and top, 2 meters in front |
| Usage | Indoor use only, do not use near water |
| General information | Manufactured for Holmes Products (Europe) Ltd. |
Frequently Asked Questions - BCH160B-I BIONAIRE
Why won't my heater turn on?
Check that the appliance is properly plugged in and the wall outlet works. Make sure the mode knob is not set to OFF (O). If the thermostat is set too low, turn it clockwise. If the heater stopped due to overheating, follow the reset procedure: turn off, unplug, wait 30 minutes, then plug back in.
How do I reset my heater after a safety shut-off?
Turn the mode knob to OFF (O) and the thermostat knob counterclockwise. Unplug the appliance and let it cool for 30 minutes. Plug it back in and use normally.
The heater emits an odor or smoke, is this normal?
Yes, during first use or after prolonged storage, the heating element may burn off accumulated dust. Place it in a well-ventilated area and let it run until the odor disappears.
The heater makes a cracking noise, is it serious?
No, it's normal. The cracking sounds are due to the thermal expansion of materials. They stop once the appliance is hot. If the noise persists, contact customer service.
How to set the desired temperature?
Let the heater warm up the room with the thermostat at maximum (clockwise). When the desired temperature is reached, slowly turn the thermostat knob counterclockwise until the heater turns off. The thermostat will then maintain that temperature.
What to do if my heater blows cold air?
Make sure the mode knob is set to position 1 (Low heat) or 2 (High heat). If it is set to Fan only, the air will not be heated.
Can I use the heater in a bathroom?
No, never use it near a bathtub, shower, or swimming pool. The heater is not designed for humid environments.
How to clean my heater?
Turn off and unplug the appliance, let it cool. Clean the exterior with a damp cloth. Avoid soap or chemicals. Regularly clean the air intake and outlet grilles with a vacuum cleaner (at least 2 times per year).
Where should I place the heater for safety reasons?
Place it on a firm and level surface. Maintain a minimum distance of 50 cm on sides and above, and 2 meters in front of the grille. Keep away from curtains, furniture, and other flammable objects.
The heater turns off and on frequently, is this normal?
Yes, the thermostat automatically turns the heater on and off to maintain the set temperature. To reduce frequency, turn the thermostat knob clockwise to a higher setting.
User questions about BCH160B-I BIONAIRE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electric heating in PDF format for free! Find your manual BCH160B-I - BIONAIRE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BCH160B-I by BIONAIRE.
USER MANUAL BCH160B-I BIONAIRE
Holmes Products (Europe) Limited
1 Francis Grove
London
SW19 4DT
UK
