BSF1810BR - Fan BIONAIRE - Free user manual and instructions

Product Type	Pedestal Fan
Model Number	BSF1810BR
Brand	Bionaire
Dimensions (H x W x D)	1300 x 450 x 450 mm
Weight	4.5 kg
Power Supply	120V AC, 60Hz
Power Consumption	50 W
Speed Settings	3
Oscillation	Yes, 90 degrees
Adjustable Height	Yes
Remote Control	Included
Safety Features	Overheat protection, tip-over switch
Cleaning	Wipe with soft, damp cloth; do not immerse
Replacement Parts	Contact Bionaire customer support
Material	Plastic and metal

Frequently Asked Questions - BSF1810BR BIONAIRE

How do I assemble the Bionaire BSF1810BR fan?

To assemble, attach the base to the pole, then connect the motor housing and fan blade. Secure with the provided screws. Refer to the manual for detailed steps.

How do I clean the fan?

Unplug the fan and use a soft, damp cloth to wipe the exterior and blades. Do not use abrasive cleaners or immerse in water.

Why is my fan not oscillating?

Ensure the oscillation knob is pushed in or turned on. If it still does not work, check for obstructions or contact customer support.

The remote control is not working. What should I do?

Replace the batteries (CR2025) and ensure there are no obstacles between the remote and the fan receiver. Point the remote directly at the fan.

What are the speed settings?

The fan has 3 speed settings: Low, Medium, and High. Use the control button or remote to adjust.

Is the fan safe to use in a child's room?

Yes, it includes safety features like overheat protection and a tip-over switch. However, always supervise young children around fans.

Can I leave the fan running overnight?

Yes, the fan is designed for continuous use. However, ensure it is on a stable surface and away from curtains or obstructions.

How do I store the fan when not in use?

Disassemble the fan and store it in a dry, cool place. Keep the remote control and cables in a safe location.

Where can I find replacement parts?

Contact Bionaire customer support or visit their official website for authorized spare parts and accessories.

What is the warranty period?

The Bionaire BSF1810BR fan typically comes with a 1-year limited warranty. Keep your receipt for any warranty claims.

USER MANUAL BSF1810BR BIONAIRE

CLEANING/MAINTENANCE INSTRUCTIONS

FAN CLEANING:

• Always unplug the fan before cleaning.

• Do not allow water to drip on or enter into fan housing

- Be sure to use a soft cloth moistened with or without a mild soap solution

• Do not use any of the following as a cleaner.

gasoline, thinnér, or benzene.

Fan Blade Cleaning

1. To access the fan blade, remove the front grill and

blade cap. 2. Clean the five blades, front and rear mills with a soft

1. Clean the full blade, from and rear grills with a soft moist cloth.

2. Replace blade, tighten blade cap, and securely fasten

the front grill (see Assembly Instructions to ensure the fan blade, front and rear grills are assembled

properly).

Fan Head, Base and Pole Cleaning

Using a soft, moist cloth with or without a mild soap

solution carefully clean the fan base, pole and head.

Please use caution around the motor housing area. Do not allow the motor or other electrical components to be

exposed to water.

FAN STORAGE

YAN STORAGE Your fan can be stored in the off season either partially disassembled or assembled. It is important to keep it in a safe dry location.
- If stored disassembled, we recommend using the original (or appropriately sized) box
• If stored assembled or partially assembled, remembe
to protect the tan head from dust. NOTE: This fan can also be used during the cold winter.
NOTE: This ran can also be used during the cold winter season to circulate wrrm air throughout your home.
season to circulate warm air throughout your home.
if d is a set of b and let
If you have any questions regarding your product or would like to learn more about other Riongare®
products, please visit our website at
www.bionaire.com. For inquiries regarding recycling
and proper disposal of this product, please contact
your local music management facility.

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

WARRANTY INFORMATION WAR

3 YEAR LIMITED WARRANTY

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions (collectively "JCS") warrants that for a period of three years from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS's Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.

JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long or implied warranty limits, as the above limitations or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary from province to province,

state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.

If you have any questions regarding this warranty or would like to obtain warranty service, please call

1-800-253-2764 or direct your correspondences to ATTN: Bionaire, Jarden Consumer Solutions, PO Box 3900, Peoria II 61614. Please do not return product to this address. The PO Box listed can only receive letters or envelopes.

ITY INFORMATION

In Canada

If you have any questions regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 or direct your correspondences to ATTN: Bionaire, Jarden Consumer Solutions, PO Box 3900, Peoria IL 61614. Please do not return product to this address. The PO Box listed can only receive letters or envelopes.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Jarden Consumer Solutions, PO Box 3900, Peoria IL 61614. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L&Y OM! If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

© 2015 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.

Printed in China

CION DE LA GARANTIA

En Canadó

PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS.

Questions? Comments? Call 1-800-253-2764 in North America

or visit our website at www.bionaire.com.

BIONAIRE

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken including the following: 1. Read all instructions before using this appliance. 2. Use fan only for purposes described in the instruction manual.

1. To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.

2. Close supervision is necessary when any appliance is used by or near children

3. Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.

4. Avoid contact with moving parts.

5. Avoid contact with moving parts.

6. Do not operate in the presence of explosive and/or flammable furnace.

7. To avoid fire hazard, NEVER place the cord under

rugs or any parts near an open flame, cooking or other heating appliance.
9. Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or return to an authorized service facility for

examination and/or repair. 10. Do not run cord under carpeting. Do not cover cord with throw rugs, runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

1. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
2. Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas.

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

LEA Y CONSERVE ESTAS INSTRUCCIONES

ASSEMBLY INSTRUCTIONS (SEE FIGURE 1) NOTE: MAKE SURE YOU REMOVE ALL CONTENTS OF THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR PARTS THAT COULD BE REQUIRED TO OPERATE YOUR FAN
PARTS THAT COULD BE REQUIRED TO OPERATE YOUR TASK. Tools required: Phillips head screw driver (not included)

Assembly time: 5–10 minutes

1. Insert the lower end of the pole through the hole in the center of base and secure with the washer and the base securing screw.

2. Loosen fan post screw and slide control panel housing

over top of extension pole. Tighten ran post screw. 3. Line up the slots of the rear grill with the patches an

the motor housing assembly. When properly aligned,

the handle of the rear grill should be in the 12 o'clock position.

1. Secure rear grill to motor housing assembly with rear grill mounting nut. Turn clockwise to tighten.
2. Slide blade over motor shaft.
3. Secure fan blade to motor shaft with the blade ran
4. Secure ran blade to motor shell with the blade cup. Turn counter-clockwise to tighten.
5. Open the expandable grill clips located around the

perimeter of the front grill and remove the grill screw and nut located on the bottom of the grill.

B. Slide the hanging clip located on the top of the front grill over the top of the rear grill.

1. Close expandable dips over the rear grill.

2. Replace grill screw and nut and tighten with screw

driver.

OPERATING INSTRUCTIONS

1. Set fan base on a dry, level surface
2. Plug cord into any standard 120 volt AC outlet.
3. To turn the fan on or to select the desired speed setting, press the Speed button (located on the control panel or remote control. Press the button to cycle through Low (1), Medium (2), and High (3) speed settings.
4. To turn the oscillation on and off, press the Oscillation button ( ) located on the control panel or
   remote control.
5. This fan comes equipped with a 15-level Timer setting
   timer to set your fan to automatically shut off. The timer can be set in 1/2 hour increments up to 7 1/2 hours. To activate the timer feature, press the Timer button (① located on the Control Panel or Remote Control.
6. To activate the Natural Breeze mode (express the Mode button located on the control panel or remote control. When turned on, the fan will randomly cycle through the three speeds settings recreating a natural outdoor breeze. By pressing the Mode button a second time, the Sleep mode will be activated. This function will be random for the first few hours, but will eventually slow the fan speed down, and when used in conjunction with the timer settings, will ultimately turn the fan off.

FEATURES - OPERATIONS

1. To turn the fan off, press the Off button (located
   on the control panel or remote control. NOTE: The timer can be used in conjunction with

FIGURE 2 CONTROL PANEL REMOTE CONTROL

A typical circuit must be done with several other functions. For example: SLEEP + 4HR TIMER causes the fan to gradually slow down over 4 hours and eventually turn off.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Potential for Radio/Television interference This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. The product generates, uses, and can radiate radio frequency energy if, not installed and used in accordance with the instructions, may cause harmful interference in the local environment of communications. However, there is no guarantee that the interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by burning the product on or off, the user is encouraged by it to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna. - Increase the separation between the product and the receiver.

BIONARE Connect the product into an outlet on a circuit different from that to which the receiver is connected.

A. Mode Button F. Timer Indicator Lights G. Oscillation Light H. Speed Setting Lights Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC STATEMENT

These limits are designed to provide reasonable protection against harmful interference in a residential installation. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the product on or off, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna. - Increase the separation between the product and the receiver.

- Connect the product into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

- Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FEATURES - OPERATIONS

CLEANING/MAINTENANCE

REMOTE CONTROL

This unit requires two (2) AAA batteries, 1.5V (not included). Battery Replacement

a) Locate the battery cover on the back of the remote control handset. Slide the battery cover off with your thumb

b) Remove old batteries from the remote control.
c) Insert two new batteries, pressing them firmly into their slot.

d) Replace the battery cover. NOTES:

- Replace all batteries of a set at the same time.

- Being careful not to bend or damage the contact spring, clean the battery contacts and devices'

contacts prior to installing the batteries. - Remove the batteries from the equipment when it is

- Remove the batteries from the equipment when it is not being used for an extended period of time.

- Remove the used batteries promptly. - Do not mix old and new batteries. Do not mix

Alkaline, standard (carbon-zinc), or rechargeable

• Do not discard used batteries into household trash

containers. Contact your local government for disposal or issuing practices in your own

disposal of recycling practices in your area.

ADJUSTMENT INSTRUCTIONS

Tilt Adjustment

Follow these instructions to tilt the fan head for upward

angle air movement. STEP 1: To change the tilting angle of the fan hand:

STEP 1. To change the tilt angle of the flange, simply loosen the tilt adjustment knob.

STEP 2: Move the fan head to the desired angle, and firmly tighten the knob to lock in place.

Height Adjustment

Follow these instructions to adjust the height of the fan.

STEP 1: Turn the height adjustment collar counter-clockwise to fagon pole

STEP 2: Adjust the extension pol

and firmly tighten the height adjustment collar in a clockwise direction.

CLEANING/MAINTENANCE

INSTRUCTIONS

Follow these instructions to correctly and safely care for

your fan. Please reme

REPLACEABLE FUS

If your (5 Amp, 125 Volt) replaceable fuse blows, please order a new fuse at 1,800,253,2764. Follow the below.

Order a new fuse at 1-000-233-2704. Follow the below instructions to replace the fuse on the plug.

User Servicing Instructions

1. Unplug your fan. Grasp plug and remove from the reagentile or other outlet device. Do not unplug by

pulling on cord.

1. Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide

using your thumb of a Namour screwdriver to slide the cover down towards the proops.

Note: Ensure that fuse cover is completely open

125 Volt fuse into fuse compartment and use a small screwdriver to secure the metal ends of the fuse into the compartment.

Caution: Risk of tire. Replace fuse only with 5 Amp, 125 Volt fuse

1. Slide fuse cover closed completely. If fuse cover is difficult to close, make sure fuse is secured in place completely by pressing down on metal ends of the

fuse. CAUTION: ρ₁ [F, D, T, U, V]

CAUTION: Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed

Discard product if the attachment plug is damaged.