RB327N4AD2 - Fridge HISENSE - Free user manual and instructions

Find the device manual for free RB327N4AD2 HISENSE in PDF.

Page 22
Table of contents Click a title to go to the page
Manual assistant
Powered by ChatGPT
Waiting for your message
Product information

Brand : HISENSE

Model : RB327N4AD2

Category : Fridge

Download the instructions for your Fridge in PDF format for free! Find your manual RB327N4AD2 - HISENSE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RB327N4AD2 by HISENSE.

USER MANUAL RB327N4AD2 HISENSE

8PJHEXQJVWHPSHUDWXU °CELV°C °C ELV°C °C ELV°C °C ELV°C

=XVlW]OLFKH7HLOH LQGHU3ODVWLNWWH Linke Scharnierabdeckung

Verwendung Ihres Gerätes

Zubehör 1) Bewegliche Regale / Tabletts ●Various glass,plastic storage shelves or wire trays are incIuded with your appIiance-different models have different combinations and different models have different features. ●The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.

+LOIUHLFKH7LSSVXQG7ULFNV

(QHUJLHVSDUWLSSV Contents

Safety and warning information2 Installing your new appliance9 Reversing the door1 0 Description of the appliance13 Using your appliance1 4

Helpful hints and tips1 5 Cleaning and care1 6 Troubleshooting17 Disposal of the appliance1 9

Safety and warning information

For your safety and correct usage, before installing and first using the appliance,read this user manual carefully, including its hints and warnings.To avoid unnecessary mistakes and accidents,it is important to make sure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and be sure that they remain with the appliance if it is moved or sold,so that anyone using it throughout its life,will be properly informed on its usage and safety notices.

For the safety of life and property,keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission. Safety for children and others who are vulnerable people ●According to EN standard This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision. Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. ●According to IEC standard This appliance is not intended for use by persons

(including children) with reduced physical,sensory or mental capabilities,or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person being responsible for their safety.

●Children should be supervised to ensure that they do not play with the appliance. ●Keep all packaging away from children as there is a risk of suffocation. ●If you are discarding the appliance,pull the plug out of the socket,cut the connection cable (as close to the appliance as you can) and remove the door to prevent children playing from suffering an electric shock or from closing themselves inside it. ●If this appliance, featuring a magnetic door seals,is to replace an older appliance having a spring lock (latch) on the door or lid,be sure to make the spring lock unusable before you discard the old appliance.This will prevent it from becoming a death trap for a child. General safety ●WARNING —This appliance is intended to be used in household and similar applications such as -staff kitchen areas in shops,offices and other working environments; -farm houses and hotels, motels and other residential type environments; -bed and breakfast type environments; -catering and similar non-retail applications. ●WARNING — Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. ●WARNING — If the supply cord is damaged,it must be replaced by the manufacturer,its service agent or similarly qualified persons in order to avoid a hazard. ●WARNING — Keep ventilation openings,in the appliance

enclosure or in the built-in structure,clear of obstruction.

WARNING — Do not use mechanical devices or other means to accelerate the defrosting process,other than those recommended by the manufacturer. ●WARNING — Do not damage the refrigerant circuit. ●WARNING — Do not use electrical appliances inside the food storage compartments of the appliance,unless they are of the type recommended by the manufacturer. ●WARNING — The refrigerant and insulation blowing gas are flammable. When disposing of the appliance,do so only at an authorized waste disposal centre.Do not expose to flame. ●WARNING —When positioning the appliance,ensure the supply cord is not trapped or damaged. ●WARNING —Do not locate multiple portable socketoutlets or portable power supplies at the rear of the appliance. ●WARNING —Food needs to be packed in bags before putting into the refrigerator, and liquids need to be packed in bottles or containers to avoid the problem that the product design structure is not easy to clean. ●

Replacing the illuminating lamps

WARNING—The illuminating lamps must not be replaced by the user! If the illuminating lamps is damaged,contact the customer helpline for assistance. This warning is only for refrigerators that contain illuminating lamps. Refrigerant The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance,a natural gas with a high level of environmental compatibility,which is nevertheless flammable.During transportation and installation of the appliance,ensure that none of the components of the ●

refrigerant circuit becomes damaged.

The refrigerant (R600a) is flammable. ●WARNING — Refrigerators contain refrigerant and gases in the insulation.Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of the refrigerant circuit is not damage prior to proper disposal. The symbol is a warning and indicates the refrigerant and insulation blowing gas are flammable. WARNING : Risk of fire / flammable materials If the refrigerant circuit should be damaged: -Avoid opening flames and sources of ignition. -Thoroughly ventilate the room in which the appliance is situated. It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit,fire, and/or electric shock. Electrical safety 1.The power cord must not be lengthened. 2. Make sure that the power plug is not crushed or damaged. A crushed or damaged power plug may overheat and cause a fire. 3.Make sure that you can access the main plug of the appliance. 4. Do not pull the main cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6.You must not operate the appliance without the interior lighting lamp cover.

7.The fridge is only applied with power supply of single phase alternating current of 220~240V/50Hz. If fluctuation of voltage in the district of user is so large that the voltage exceeds the above scope,for safety sake, be sure to apply

A.C. Automatic voltage regulator of more than 350W to the fridge.The fridge must employ a special power socket instead of common one with other electric appliances. Its plug must match the socket with ground wire. Daily use ●Do not store flammable gas or liquids in the appliance, there is a risk of an explosion. ●Do not operate any electrical appliances in the appliance (e.g. electric ice cream makers,mixers etc.). ●When unplugging always pull the plug from the mains socket,do not pull on the cable. ●Do not place hot items near the plastic components of this appliance. ●Do not place food products directly against the air outlet on the rear wall. ●Store pre-packed frozen food in accordance with the frozen food manufacture’s instructions. ●The appliances manufactures storage recommendations should be strictly adhered to.Refer to relevant instructions for storage. ●Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure on the container,which may cause it to explode,resulting in damage to the appliance. ●Frozen food can cause frost burns if consumed straight from the freezer compartment. ●Do not place the appliance in direct sunlight. ●Keep burning candles,lamps and other items with naked flames away from the appliance so that do not set the appliance on fire.

The appliance is intended for keeping food stuff and/or beverages in normal household as explained in this instruction booklet.You should take care when move it as the appliance is heavy.

●Do not remove or touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns. ●Never use the base,drawers,doors etc. to stand on or as supports. ●Frozen food must not be refrozen once it has been thawed out. ●Do not consume ice popsicles or ice cubes straight from the freezer as this can cause freezer burn to the mouth and lips. ●To avoid items falling and causing injury or damage to the appliance,do not overload the door racks or put too much food in the crisper drawers. caution! Care and cleaning ●Before maintenance,switch off the appliance and disconnect the mains plug from the mains socket. ●Do not clean the appliance with metal objects,steam. cleaner,ethereal oils,organic solvents or abrasive cleansers. ●Do not use sharp objects instead of a plastic scraper to remove frost from the appliance. Installation Important! ●For electrical connection carefully, follow the instructions given in this manual.Unpack the appliance and check if there are damages on it. ●Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it.In this case retain packing. ●It is advisable to wait at least four hours before connecting ●

the appliance to allow the oil to flow back in the compressor.

●Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation, follow the instructions relevant to installation. ●Wherever possible the back of the product should not be too close to a wall to avoid touching or catching warm parts (compressor,condenser) to prevent the risk of a fire, follow the instructions relevant to installation. ●The appliance must not be locate close to radiators or cookers. ●Make sure that the mains plug is accessible after the installation of the appliance. Service ●Any electrical work required to do the servicing of the appliance should be carried out by qualified electrician or competent person. ●This product must be serviced by an authorized Service Center, and only genuine spare parts must be used. 1)If the appliance is Frost Free. 2)If the appliance contains freezer compartment.

Installing your new appliance

Before using the appliance for the first time, you should be informed of the following tips. Ventilation of appliance In order to improve efficiency of the cooling system and save energy, it is necessary to maintain good ventilation around the appliance for the dissipation of heat.For this reason,sufficient clear space should be available around the refrigerator.

Suggest: It is advisable for there to be

50-70mm of space from the back to the wall,at least 100mm from its top,at least 100mm from its side to the wall and a clear space upfront to allow the doors to open 135°. As shown in follow diagrams.

●This appliance performs well within the climate class from SN to T showed in the table below.It may not work properly if being left at a temperature above or below the indicated range for a long period. Climate class Ambient temperature SN +10°C to +32°C N +16°C to +32°C ST +16°C to +38°C T +16°C to +43°C ● Stand your appliance in a dry place to avoid high moisture. ● Keep the appliance out of direct sunlight, rain or frost. Stand the appliance away from heat sources such as stoves,fires or heaters. Leveling of appliance ●For sufficient leveling and air circulating in the lower rear section of the appliance, the bottom feet may need to be adjusted.You can adjust them manually by hand or by using a suitable spanner. ●To allow the doors to self-close, tilt the top backwards by about 10mm .

The side at which the door opens can be changed, from the right side (as supplied) to the left side, if the installation site requires. Warning! When reversing the door, the appliance must not be connected to the mains. Ensure that the plug is removed from the mains socket.

2.Use a putty knife or thin-blade screwdriver to prize the screw hole cover which is at the top Ieft corner of the refrigerator and the upper hinge cover which is at the top right corner of the refrigerator.

Cross-shaped screwdriver

Thin-blade screwdriver

Monkey wrench 8mm wrench

Additional parts(in the plastic bag)

Note:If required you may lay the refrigerator on its back in order to gain access to the base,you should rest it on soft foam packaging or similar material to avoid damaging the backboard of the refrigerator.To reverse the door,the foIlowing steps are generally recommended.

1.Stand the refrigerator upright.Open the upper door to take out alI door sheIves (to avoid damage)and then close the door.

3.Unscrew the special flange selftapping screws which are used for fixing the right upper hinge part by a 8mm socket wrench or a spanner(please support the upper door with your hand when doing it).

4.Remove the upper hinge axis,transfer it to reversed side and tighten securely,then put it in a safe place.

5.Remove the upper door from the middle hinge by carefully lifting the door straight up. Note:When removing the door,watch for washer(s) between the center hinge and the bottom of the upper door that may stick to the door.Do not lose. 8.Place the lower door on a smooth surface with its paneI upwards.Loose screw②and part①,then lnstall them to the left side and tighten securely.

6.Place the upper door on a smooth surface with its panel upwards.Loose screw②and part①,then Install them to the left side and tighten securely.

② Self-tapping screw

9.Change screw hole covers on middle cover plate from left to right(as shown in figure below).

7.Unscrew the two special flange selftapping screws which are used for fixing the middIe hinge part,then remove the middle hinge part that hold the Iower door in place.

Note:When removing the door, watch for washer(s) between the Iower hinge and the bottom of the lower door that may stick to the door.Do not lose.

10.Lay the refrigerator on soft foam packaging or similar materiaI.Remove both adjustable bottom feet parts,and the lower hinge part by unscrewing the special flange self-tapping screws.

①Lower hinge part(right)

②Adjustable bottom feet part ③SeIf-tapping screws

11.Replace the lower hinge part to the left side and fixing it with the special flange self-tapping screws.Replace the adjustable bottom feet parts to another side and fixing it.

15.Transfer the upper hinge part and make the upper hinge axis into the upper hole of the upper door,and adjust the position of the upper door(please support the upper door with your hand when doing it),fixing the upper hinge part with the special flange self-tapping screws. upper hinge part

12.Transfer the lower door to the property position,adjust the lower hinge part,make the hinge axis into the lower hole of the lower door,then tight the bolts.

16. InstaII the screw hoIe cover on fhe top right corner of the refrigerator.InstaII the upper hinge cover(which is in the plastic bag)on the left corner.Put the other upper hinge cover into the plastic bag. upper hinge cover(left)

13.Upturn fhe middIe hinge part the direction 180 degree,adjust its position, change the washer on the axis to the

Iower side,make the middle hinge axis into the upper hole of the lower door,tight the bolts. middle hinge part

14.Transfer the upper door to the appropriate position.Secure the door’s level,make the middle hinge axis into the lower hole of the upper door.

17.Open the upper door and install the door shelves,then close it.

Warning! When changing the side at which the door opens,the appliance must not be connected to the mains.Remove plug from the mains beforehand.

Description of the Appliance

View of the appliance 1.Upper hinge cover 2.LED Iight 3.Wind channel cover in fridge 4.Fridge shelf 5.Temperature controller 6.VegetabIe drawer cover 7.VegetabIe drawer 8.Wind ChanneI cover in freezer 9.Freezer tray 10MiddIe freezer drawe r 11.Lower freezer shelf 12.Lower freezer drawer 13.Adjustable bottom feet 14.Fridge door 15.Upper door shelf 16.Egg tray(inside) 17.Middle door shelf 18.Fridge door seal 19.Lower door shelf 20.Freezer door seaI 21.Freezer door

to unceasing modification of our products,your refrigerator may be slightly different from this instruction manual,but its functions and usage remain the same.

●To get more space in freezer,you can remove drawers(except the bottom freezer drawer),ice tray.

Using your appliance

Accessories 1) Movable sheIves/trays ●Various glass,plastic storage shelves or wire trays are incIuded with your appIiance-different models have different combinations and different models have different features. ●The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.

Remove the door shelf

Press the right side of the door shelf inwardly,while holding the left side.

When the notch of the shelf has been detachesd from the refrigerator door, remove the rack obliquely upwardly. instalI the door shelf

Remove and install the door shelf

Warning:The door shelf must not removed and installed by the user!lf the door shelf is damaged,contact the customer helpline for assistance. To replace the door shelf, the below steps can be followed:

Firstly tilt the left side of the door shelf,and make sure the notch has been fastened to the door. Then press the right side inwardly,push it down to the right place.

Use your appliance according to the following control regulations,your appliance has the corresponding functions as the control panels showed in the pictures below. Temperature regulator in refrigerator chamber 1.Insufficient refrigeration in chamber. set the temperature controller at “colder”. 2.Using the refrigerator in normal. Set the temperature controller at “Mid”. Important! High ambient temperatures (e.g. on hot summer days) and a colder setting can cause the compressor to run

continuously or even non-stop!

So we do not advise the user set the temperature control knob at“colder” or “cold” in normal. Reason:when the ambient temperature is high,the compressor must run continuously to maintain the low temperature in the appliance.

Helpful hints and tips

Energy saving tips We recommend that you follow the tips below to save energy. ●Try to avoid keeping the door open for long periods in order to conserve energy. ●Ensure the appliance is away from any sources of heat (Direct sunlight, electric oven or cooker etc) ●Don't set the temperature colder than necessary. ●Don't store warm food or evaporating liquid in the appliance. ●Place the appliance in a well ventilated, humidity free, room. Please refer to Installing your new appliance chapter. ●If the diagram shows the correct combination for the drawers, crisper and shelves, do not adjust the combination as this is designed to be the most energy efficient configuration. Hints for fresh food refrigeration ●Do not place hot food directly into the

refrigerator or freezer,the internal temperature will increase resulting in the compressor having to work harder and will consume more energy.

●Do cover or wrap the food,particularly if it has a strong flavor. ●Place food properly so that air can circulate freely around it. Hints for refrigeration ●Meat (All Types) Wrap in polythene food: wrap and place on the glass shelf above the vegetable drawer. Always follow food storage times and use by dates suggested by manufacturers. ●Cooked food, cold dishes, etc.: They should be covered and may be placed on any shelf. ●Fruit and vegetables: They should be stored in the special drawer provided. ●Butter and cheese: Should be wrapped in airtight foil or plastic film wrap.

Should have a lid and be stored in the door racks.

Hints for freezing ●When first starting-up or after a period

out of use, let the appliance run at least 2 hours on the higher settings before putting food in the compartment.

●Prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required. ●Wrap up the food in aluminum foil or polyethylene food wraps which are airtight. ●Do not allow fresh,unfrozen food to touch the food which is already frozen to avoid temperature rise of the latter. ●Iced products,if consumed immediately after removal from the freezer compartment,will probably cause frost burns to the skin. ●It is recommended to label and date each frozen package in order to keep track of the storage time. Hints for the storage of frozen food ●Ensure that frozen food has been

stored correctly by the food retailer.

●Once defrosted,food will deteriorate

rapidly and should not be re-frozen. Do not exceed the storage period indicated by the food manufacturer.

Switching off your appliance If the appliance needs to be switched off for an extended period,the following steps should be taken prevent mould on the appliance. 1.Remove all food. 2.Remove the power plug from the mains socket. 3.Clean and dry the interior thoroughly. 4.Ensure that all the doors are wedged open slightly to allow air to circulate.

For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly (at least every two months). Warning! The appliance must not be connected to the mains during cleaning as there is a danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains socket. Exterior cleaning To maintain good appearance of your appliance, you should clean it regularly. ●Wipe the control panel with a clean, soft cloth. ●Spray water onto the cleaning cloth instead of spraying directly on the surface of the appliance.This helps ensure an even distribution of moisture to the surface. ●Clean the doors, handles and cabinet surfaces with a mild detergent and then wiped dry with a soft cloth. Caution! ●Don't use sharp objects as they are

likely to scratch the surface.

●Don't use Thinner, Car detergent,

Clorox, ethereal oil,abrasive cleansers or organic solvent such as Benzene for cleaning. They may damage the surface of the appliance and may cause fire.

Interior cleaning You should clean the appliance interior regularly.It will be easier to clean when food stocks are low. Wipe the inside of the fridge freezer with a weak solution of bicarbonate of soda,and then rinse with warm water using a wrung-out sponge or cloth.Wipe completely dry before replacing the shelves and baskets. Thoroughly dry all surfaces and removable parts before putting them back into place. Although this appliance automatically

defrosts, a layer of frost may occur on the freezer compartment’s interior walls if the freezer door is opened frequently or kept open too long.If the frost is too thick, choose a time when the freezer is nearly empty and proceed as follow:

1.Remove existing food and accessories baskets,unplug the appliance from the mains power and leave the doors open. Ventilate the room thoroughly to accelerate the process. 2. When defrosting is completed,clean your freezer as described above. Caution! Do not use sharp objects to remove frost from the freezer compartment. Only after the interior is completely dry should the appliance be switched back on and plugged back into the mains socket. Door seals cleaning Take care to keep door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door.Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning. Caution!Only after the door seals are completely dry should the appliance be powered on . Replacing the LED light: Warning:The LED light should be replaced by a competent person. If the LED light is damaged,contact the customer helpline for assistance.To replace the LED light,the below steps can be followed: 1. Unplug your appliance. 2. Remove light cover by pushing up and out. 3. Hold the LED cover with one hand and pull it with the other hand while pressing the connector latch. 4. Replace LED light and snap it correctly in place.

If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly,you can carry out some easy checks before calling for service, please see below. Warning! Don't try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below,contact a qualified electrician,authorized service engineer or the shop where you purchased the product. Problem

Possible cause & Solution

Check whether the power cord is plugged into the power outlet properly .

Appliance is not working correctly

Check the fuse or circuit of your power supply,replace y if necessar .

The ambient temperature is too low. Try setting the chamber temperature to a colder level to solve the

This problem. It is normal that the freezer is not operating during the defrost cycle, or for a short time after the appliance is switched on to protect the compressor. Odours from the compartments

The interior may need to be cleaned

Some food, containers or wrapping cause odours. The sounds below are quite normal: ●Compressor running noises.

●Air movement noise from the small fan motor in the freezer compartment or other compartments.

●Gurgling sound similar to water boiling. ●Popping noise during automatic defrosting. Noise from the appliance ●Clicking noise before the compressor starts.

Other unusual noises are due to the reasons below and may need you to check and take action:

●The cabinet is not level. ●The back of appliance touches the wall. ●Bottles or containers fallen or rolling.

The motor runs continuously

It is normal to frequently hear the sound of the motor, it will need to run more when in following circumstances:

●Temperature setting is set colder than necessary ●Large quantity of warm food has recently been stored within the appliance.

●The temperature outside the appliance is too high. ●Doors are kept open too long or too often.

A layer of frost occurs in the compartment

●After your installing the appliance or it has been switched off for a long time.

Check that the air outlets are not blocked by food and ensure food is placed within the appliance to allow sufficient ventilation.Ensure that door is fully closed.To remove the frost, please refer to the“Cleaning and care” chapter.

Temperature inside is too warm

You may have left the doors open too long or too frequently; or the doors are kept open by some obstacle; or the appliance is located with insufficient clearance at the sides, back and top .

Temperature inside is too cold

Increase the temperature by following the“Control panel ” chapter.

Doors can’t be closed easily

Check whether the top of the refrigerator is tilted back by

10-15mm to allow the doors to self close, or if something inside is preventing the doors from closing.

Water drips on the floor

The water pan (located at the rear bottom of the cabinet) may not be properly leveled, or the draining spout under neath the top of the compressor depot may not be properly positioned to direct water into this pan, or the water spout is blocked. You may need to pull the refrigerator away from the wall to check the pan and spout.

Check if the refrigerator is power-off for a long time, this may cause the ice in the bucket to melt into water,and flow to the floor .

●The LED light may be damaged.Refer to replace LED lights in cleaning and care chapter.

The light is not working ●The controI system has disabled the lights due to the door being kept open too long,close and reopens the door to reactivate the Iights.

Disposal of the appliance

It is prohibited to dispose of this appliance as household waste. Packaging materials Packaging materials with the recycle symbol are recyclable. Dispose of the packaging into a suitable waste collection container to recycle it. Before disposal of the appliance 1. Pull out the mains plug from the mains socket. 2. Cut off the power cord and discard with the mains plug. Warning! Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of the refrigerant circuit is not damage prior to proper disposal.

Correct Disposal of this product

This symbol on the product or in its packing indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council your household waste disposal service, or the shop where you purchased the product.

To avoid contamination of food, please respect the following instructions:

- Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance. - Clean regularly surfaces that can come in contact with food and accessible drainage systems. - Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food. - Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making icecream and making ice cubes. - One-, two- and three-star compartments are not suitable for the freezing of fresh food. Order

Compartments Target storage temp.[℃]

Eggs, cooked food, packaged food, fruits and vegetables, dairy products, cakes, drinks and other foods which are not suitable for freezing.

Seafood (fish,shrimp,shellfish),freshwater aquatic products and meat products

(recommended for 3 months , t he longer the storage time,the worse the taste and nutrition),suitable for frozen fresh food.

Seafood (fish, shrimp, shellfish),freshwater aquatic products and meat products

(recommended for 3 months,the longer the storage time,the worse the taste and nutrition),are not suitable for frozen fresh food.

Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products

(recommended for 2 months,the longer the storage time,the worse the taste and nutrition), are not suitable for frozen fresh food.

Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products

(recommended for 1 month,the longer the storage time,the worse the taste and nutrition), are not suitable for frozen fresh food.

Fresh pork, beef, fish, chicken, some packaged processed foods, etc. (Recommended to eat within the same day, preferably no later than

3 days) . Partially encapsulated processed foods (nonfreezable foods)

Fresh/frozen pork, beef, chicken, freshwater aquatic products, etc.(7 days below 0 ℃ and above 0 ℃ is recommended for consumption within that day, preferably no more than 2 days).

Seafood (less than 0 for 15 days, it is not recommended to store above 0℃)

Fresh pork,beef,fish,chicken,cooked food,etc.

(Recommended to eat within the same day,preferably no more than 3 days)

red wine,white wine,sparkling wine etc.

Note: please store different foods according to the compartments or target storage temperature of your purchased products.

- If the refrigerating appliance is left empty for long periods,switch off,defrost, clean,dry, and leave the door open to prevent mould developing within the appliance.

② Self-tapping screw

② Self-tapping screw

Cause & Solution possible

Remove the door shelf