DHT71EUK - Dehumidifier SMEG - Free user manual and instructions

USER MANUAL DHT71EUK SMEG

DHT71EUK Dryer User Manual 2960311002_EN/181114.1706 Downloaded from www.Manualslib.com manuals search engine Please read this user manual first! Dear Customer, Thank you for prefering a Smeg product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well. Pay attention to all details and warnings specified in the user manual and follow the instructions given therein. Use this user manual for the model indicated on the cover page. Explanation of symbols Throughout this user manual the following symbols are used:

Important information or useful hints about usage. Warning for hazardous situations with regard to life and property. Warning against electric shock. Warning against hot surfaces. Warning against fire hazard. Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging wastes with the domestic waste or other wastes, discard them to the dedicated collection points designated by the local authorities. 2 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dryer / User Manual 1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

• The dryer can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children should not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone.
• Children of less than 3 years should be kept away unless continously supervised.
• Adjustable feet should not be removed. The gap between the dryer and the floor should not be reduced with materials such as carpet, wood and tape. This will cause problems with the dryer.
• Always have the installation and repairing procedures carried out by the Authorized Service. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
• Never wash the dryer by spraying or pouring water onto it! There is the risk of electric shock! Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine 3 / 32 EN Important instructions for safety and environment

1.1.1 Electrical safety

Electrical safety instructions should be followed while electrical connection is made during the installation.

• Connect the dryer to a grounded outlet protected by a fuse at the value specified on the type label. Have the grounding installation performed by a qualified electrician. Our company shall not be liable for any damages that will arise when the dryer is used without grounding in accordance with the local regulations.
• The voltage and allowed fuse protection is stated on the type label plate.
• The voltage specified on the type label must be equal to your mains voltage.
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation, maintenance, cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to connect the dryer to power supply in order to decrease the risk of fire and electric shock.
• Power cable plug must be easily accessible after installation.

Damaged mains cable should be changed notifying the Authorized Service. If the dryer is faulty, it must not be operated unless it is repaired by an authorized service agent! There is the risk of electric shock! 4 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dryer / User Manual Important instructions for safety and environment

1.1.2 Product safety

Points to be taken into consideration for fire hazard: Below specified laundry or items must not be dried in the dryer considering fire hazard.

• Unwashed laundry items
• Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin or paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer. For this reason especially the items containing the above specified stains must be washed very well, to do this use adequate detergent and choose a high washing temperature. Below specified laundry or items must not be dried in the dryer due to the fire hazard:
• Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads.
• Clothing cleaned with industrial chemicals. Items such as lighter, match, coins, metal parts, needle etc. may damage the drum set or may lead to functional problems. Therefore check all the laundry that you will load into your dryer. Never stop your dryer before the programme completes. If you must do this, remove all laundry quickly and lay them out to dissipate the heat. Clothes that are washed inadequately may ignite on their own and even may ignite after drying ends. Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine 5 / 32 EN Important instructions for safety and environment

• You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect. Underwear that contains metal reinforcements should not be dried in the dryer. Dryer may be damaged if metal reinforcements come loose and break off during drying. Use softeners and similar products in accordance with the instructions of their manufacturers. Always clean the lint filter before or after each loading. Never operate the dryer without the lint filter installed.

• Never attempt to repair the dryer by yourself. Do not perform any repair or replacement procedures on the product even if you know or have the ability to perform the required procedure unless it is clearly suggested in the operating instructions or the published service manual. Otherwise, you will be putting your life and others’ lives in danger.
• There must not be a lockable, sliding or hinged door that may block the opening of the loading door in the place where your dryer is to be installed.
• Install your dryer at places suitable for home use. (Bathroom, closed balcony, garage etc.)
• Make sure that pets do not enter the dryer. Check the inside of the dryer before operating it.
• Do not lean on the loading door of your dryer when it is open, otherwise it may fall over.
• The lint must not be allowed to accumulate around the tumble dryer 6 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dryer / User Manual Important instructions for safety and environment

1.2 Mounting over a washing machine

• A fixing device should be used between the two machines when installing the dryer above a washing machine. The fitting device must be installed by the authorized service agent.
• Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the products on a solid floor that has sufficient load carrying capacity!

Washing machine cannot be placed on the dryer. Pay attention to the above warnings during the installation on your washing machine. Installation Table for Washing Machine and Dryer Dryer Depth Washing Machine Depth 62cm 60 cm 54 cm 50 cm 49 cm 45 cm 40 cm 54 cm Can be installed Can be installed Can be installed Can be installed Can be installed 60 cm Can be installed Can be installed Can be installed Can be installed Can be Cannot be Cannot be installed installed installed Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine Can be Cannot be installed installed 7 / 32 EN Important instructions for safety and environment

• Dryer has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.
• Use the dryer only for drying laundry that are marked accordingly.
• The manufacturer waives any responsibility arisen from incorrect usage or transportation.
• The service life of the dryer that you purchased is 10 years. During this period, original spare parts will be available to operate the dryer properly.
• Packaging materials are dangerous for the children. Keep packaging materials away from children.
• Electrical products are dangerous for the children. Keep children away from the product when it is operating. Do not let them tamper with the dryer. Use the child-proof lock in order to prevent the children to tamper with the dryer.

Child-proof lock is on the control panel. (See Child lock)

• Keep loading door closed even when the dryer is not in use. 8 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dryer / User Manual Important instructions for safety and environment

1.5 Compliance with the WEEE regulation

and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

1.6 Compliance with RoHS Directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

1.7 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities. Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine 9 / 32 EN Important instructions for safety and environment

1.8 Technical Specifications

• Min. height: Height with adjustable feet are closed. Max. height: Height with adjustable feet are opened maximum. ** Dry laundry weight before washing. *** Type label is located behind the loading door.

Technical specifications of the dryer are subject to specification without notice to improve the quality of the product. Figures in this manual are schematic and may not match the product exactly. Values stated on markers on the dryer or in the other published documentation accompanying with the dryer are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the dryer, these values may vary. 10 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dryer / User Manual 2 Your Dryer

1. Water drain hose *

*It can be supplied with your machine depending on its model. Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine 11 / 32 EN 3 Installation Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user's manual.(See 3.3 Connecting to the drain and 3.5 Electrical connection) If they are not suitable, contact a qualified electrician and technician to make necessary arrangements.

Preparation of the dryer's location as well as the electrical and waste water installations is under customer's responsibility. Prior to installation, visually check if the dryer has any defects on it. If the drier is damaged, do not have it installed. Damaged products cause risks for your safety.

Do not place the dryer on the power cable.

3.2 Removing the transportation

Remove the transportation safety assembly before using the dryer for the first time. Open the loading door. There is a nylon bag inside the drum that contains a piece of styrofoam. Hold it from its section marked with XX XX. Pull the nylon towards yourself and remove the transportation safety assembly. Let your dryer wait for 12 hours before starting to use it.

3.1 Appropriate installation location

Install the dryer on a stable and level surface. Dryer is heavy. Do not move it by yourself.

• Operate your dryer in a well ventilated, dust-free environment.
• The gap between the dryer and the surface should not be reduced by the materials such as carpet, wood and tape.
• Do not cover the ventilation grills of the dryer.
• There must not be a lockable, sliding or hinged door that may block the opening of the loading door in the place where your dryer is to be installed.
• Once the dryer is installed, it should stay at the same place where its connections have been made. When installing the dryer, make sure that its rear wall does not touch anywhere (tap, socket, etc.).
• Place the dryer at least 1 cm away from the edges of other furniture.
• Your dryer can be operated at temperatures between +5°C and +35°C. If the operating conditions fall outside of this range, operation of the dryer will be adversely affected and it can get damaged.
• The rear surface of the tumble dryer shall be placed against a wall. 12 / 32 EN Downloaded from www.Manualslib.com manuals search engine

Check that no part of the transportation safety assembly remains inside the drum.

3.3 Connecting to the drain

In products equipped with condenser unit, water accumulates in the water tank during the drying cycle. You should drain accumulated water after each drying cycle. You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank. Connecting the water drain hose 1-2 Pull hose at the behind of the dryer by hand in order to disconnect it from where it is connected. Do not use any tools to remove the hose. 3 Connect one end of the drain hose supplied with the dryer to the connection point from where you removed the hose of the product in previous step. 4 Connect the other end of the drain hose directly to the wastewater drain or to the washbasin. Dryer / User Manual Installation

3.5 Electrical connection

For specific instructions for electrical connection required during installation (see 1.1.1 Electrical Safety)

3.6 Transportation of the dryer

Unplug the dryer before transporting it. Drain all water that has remained in the dryer. If direct water drain connection is made, then remove the hose connections. We recommend carrying the dryer in upright position. If it is not possible to carry the machine in the upright position, we recommend carrying it by tilting towards the right side when looked from the front.

Hose connection should be made in a safe manner. Your drain house will be flooded if the hose comes out of its housing during water discharge.

3.7 Warnings about sounds

It is normal to hear a metallic noise from the compressor sometimes during operation.

Water collected during operation is pumped to water tank. It is normal to hear pumping noise during this process. Water drain hose should be attached to a height of maximum 80 cm. Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine.

3.4 Adjusting the feet

In order to ensure that the dryer operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Turn the feet to left or right until the dryer stands level and firmly.

Never unscrew the adjustable feet from their housings. Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine 13 / 32 EN Installation

3.8 Changing the illumination lamp

In case an illumination lamp is used in your laundry dryer To change the Bulb/LED used for illumination of your tumble dryer, call your Authorized Service. The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place laundry in the tumble dryer in a comfortable way. 14 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dryer / User Manual 4 Preparation

4.1 Laundry suitable for drying in the dryer

Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme.

LAUNDRY DRYING SYMBOLS

Do not dry Do not dryclean Dry-cleanable Lay in shadow to dry Lay to dry Hang to dry Do not dry with dryer Hang wet to dry Sensitive / Delicate dry Without heating At low temperature No Iron At medium temperature At high temperature Drying Settings Suitable for dryer At any temperature Drying Symbols Maximum temperature Iron at high temperature Iron at medium temperature 200 0C 150 0C

4.2 Laundry not suitable for drying in

Delicate embroidered fabrics, woolen, silk garments, delicate and valuable fabrics, airtight items and tulle curtains are not suitable for machine drying.

4.3 Preparing laundry for drying

Laundry may be tangled with each other after washing. Separate the laundry items before placing them into the dryer. Dry garments having metal accessories such as zippers, inside out. Fasten the zippers, hooks and buckles and button sheets. Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine Iron at low temperature 110 0C Iron without steam IRON Dry or Steam Do not iron Iron -

4.4 Things to be done for energy

saving Following information will help you use the dryer in an ecological and energy-efficient manner.

• Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is reduced.
• Sort out the laundry depending on their type and thickness. Dry the same type of laundry together. For example thin kitchen towels and table clothes dries earlier than thick bathroom towels.
• Follow the instructions in the user manual for programme selection.
• Do not open the loading door of the machine during drying unless necessary. If you must certainly open the loading door, do not to keep it open for a long time.
• Do not add wet laundry while the dryer is in operation
• Clean the lint filter before or after each drying cycle. (See 6. Maintenance and cleaning)
• Clean the filter drawer regularly either when the 15 / 32 EN Preparation

Filter Drawer Cleaning warning symbol appears or after every 5 drying cycles. (See 6. Maintenance and cleaning) Ventilate the room, where the dryer is located, well during drying.

4.5 Correct load capacity

Follow the instructions in the “Programme selection and consumption table”. Do not load more than the capacity values stated in the table.

It is not recommended to load the dryer with laundry exceeding the level indicated in the figure. Drying performance will degrade when the machine is overloaded. Furthermore, dryer and the laundry can get damaged. 16 / 32 EN Downloaded from www.Manualslib.com manuals search engine Following weights are given as examples. Cotton quit covers (double) Cotton quit covers (single) Bed sheets (double) Bed sheets (single) Large tablecloths Approximate weights (g)*

Small tablecloths Tea napkins Bath towels Hand towels Blouses Cotton shirts Shirts Cotton dresses Dresses Jeans Handkerchiefs (10 pieces) T-Shirts

Laundry *Dry laundry weight before washing. Dryer / User Manual 4 Operating the product

Tank Child-proof lock full Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine Volume up Filter cleaning Mute Anti Creasing 17 / 32 EN Operating the product

5.3 Preparing the machine

Plug in the machine Place laundry inside the machine. Press the On/Off button. When your machine turns on for the first time, it turns on with the declaration (cotton cabinet dryness) program.

Pressing the On/Off button doesn‘t mean the program starts. Press the Start / Pause button to start the program.

5.4 Program selection

Determine the appropriate program from the chart below containing the drying levels. Select the program you desire using the Program Selection knob. Only cotton laundry is dried in normal temperature. Thick and multi-layered laundry (towels, sheets, jeans etc.) are dried so that they can be placed into wardrobe without ironing. Extra Dry Cupboard dry Cupboard dry + Normal laundry (tablecloths, underwear etc.) are dried so that they can be placed into wardrobe without ironing. Normal laundry (Ex: tablecloths, underwear) are again dried so that they can be placed into the wardrobe but more so than the wardrobe dryness option.

The main programs are given below based on fabric type.

Synthetic Dry durable laundry with this program. It dries in normal temperature. Recommended for use with your cotton laundry (sheets, bed covers, towels, bathrobes etc.) Dry laundry that is not very durable with this program. Recommended for use with your synthetic laundry.

The following extra programs are available in the machine for special conditions.

Extra programs may vary according to the specifications of your machine. In order to receive better results from drying machine programs, your laundry should be washed with the appropriate program in your washing machine and wringed with recommended wringing revolution..

Baby Use to dry jeans that are wringed with high rpm in washing machine. Use to dry laundry made from synthetic, cotton or mixed fabrics. You can use this program to dry cotton laundry that you had wringed in high rpm in your washing machine. It dries 1 kg of your Cotton laundry (3 shirts / 3 T-shirts) in 45 minutes. Program for daily drying of cotton and synthetic laundry and lasts 90 minutes. Iron Dry

Normal laundry (shirts, dresses etc) are dried ready for ironing. For detailed program information see. „Program selection and consumption table“.. 18 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dries shirts more delicately and thus causes less wrinkles for easy ironing. Program used for baby clothing with can be dried approval on the label.

Very little dampness might remain on the shirts after the program. It is recommended that you do not leave the shirts in the drying machine. Dryer / User Manual Operating the product

Delicate You can dry your delicates suitable for drying or laundry that is recommended to hand wash (silk blouses, thin underwear etc.) in low temperature.

It is recommended to dry your delicates in laundry bag to prevent wrinkles and damage. When the program ends, take your laundry out of the machine immediately and hang them to prevent wrinkles.

Timed programs It only performs ventilation for 10 minutes without blowing hot air. You can ventilate the cotton and linen clothing that has remained closed for a long duration and remove their odor. You can select the 30 mins and 45 mins time programs to achieve the desired final drying level with low temperature.

On this program, the machine dries as long as the set duration, regardless of the drying level. Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine 19 / 32 EN Operating the product

5.7 Program selection and consumption table

Programs Capacity (kg) Spin speed in washing Approximate amount Drying time (minutes) machine (rpm) of remaining humidity Cottons / Coloreds

Energy consumption values Programs Capacity (kg) Spin speed in washing Approximate amount Energy consumption machine (rpm) of remaining humidity value kWh Cottons linen Ready to wear*

Cottons Ready to iron

Synthetics Ready to wear Power consumption of the off-mode for the standart cotton programme at full load, PO (W)

Power consumption of the left-on mode for the standart cotton programme at full load, PL (W) 1,0 Contains fluorinated greenhouse gases covered by the Kyoto Protocol. Hermetically sealed.R407C/0,320 kg „Cotton cupboard dry programme“ used at full and partial load is the standard drying programme to which the information in the label and the fiche relates, that this programme is suitable for drying normal wet cotton laundry and that it is the most efficient programme in terms of energy consumption for cotton.

• : Energy Label standard program (EN 61121:2012) All the filters must be cleaned prior to test series. All the values in the table are determined according to EN 61121:2012 standard. Consumption values may vary from the values in the table depending on laundry type, wringing revolution, ambient conditions and changes in voltage. 20 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dryer / User Manual Operating the product

5.8 Auxiliary functions

Sound warning cancel Drying machine makes sound warnings when the program is completed. If you don’t want sound notifications, press the “Sound Notification” button. When you press the sound notification button it lights up, and program does not make sound notifications when completed.

You can select this function before or after the program starts.

Warning symbols may vary according to the specifications of your machine.

Fiber filter cleaning When the program is completed, a warning led lights up, which indicates that the filter has to be cleaned. Loading door open Start/Pause led blinks when the loading door of the drying machine is open.

You can delay the end duration of the program for up to 24 hours with the end duration function.

1. Open the loading door and place your laundry.

2. Select the drying program.

3. Press the end duration selection button and set the

delay duration you want. End duration led lights up. (End duration moves continuously when you keep pressing the button).

4. Press the Start / Pause button. End duration

countdown begins. The “:” sign in the middle of the displayed delay duration blinks.

You can add or remove laundry for the duration of the end duration. The duration displayed on the screen is the sum of the normal drying duration and the end duration. At the end of the countdown the end duration led turns off, drying beings and drying led lights up. Changing the end duration

If the filter cleaning led blinks, see the „Troubleshooting“ chapter. Water tank When the program is completed, a warning led lights up, which indicates that the water tank must be emptied. If the water tank fills up while the program is running, warning led starts blinking and the machine goes into stand-by. In that case empty the water in the water tank and start the program by pressing the Start / Pause button. Warning led turns off and the program resumes. Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine If you want to change the duration during the countdown:

1. Cancel the program by pressing the On/Off button.

Turn on the drying machine again by pressing the On/Off button. When your drying machine turns on for the first time, it turns on with the declaration (cotton wardrobe dryness) program.

2. Select the program you desire using the Program

3. Repeat the end duration operation for the duration

4. Start the program by pressing the Start / Pause

button. 21 / 32 EN Operating the product Canceling the end duration function If you want to cancel the end duration setting countdown and start the program right away:

1. Cancel the program by pressing the On/Off button.

Turn on the drying machine again by pressing the On/Off button. When your drying machine turns on for the first time, it turns on with the declaration (cotton wardrobe dryness) program.

2. Select the program you desire using the Program

3. Start the program by pressing the Start / Pause

5.11 Starting the program

Start the program by pressing the Start / Pause button. Start/Pause led and the Drying led light up, indicating the program started. The “:” sign in the middle of the remaining duration starts to blink.

The machine features a child lock which prevents the machine program flow from being affected when buttons are pressed during operation. When the Child Lock is active, all buttons except for the On/Off button are deactivated. To activate the child lock, press the Sound Notification button and End Duration button simultaneously for 3 seconds. Te child lock should be deactivated to be able to start a new program after the current program ends or to be able to interfere with the current program. Keep the same buttons pressed for 3 seconds again to deactivate the child lock.

The lock led on the screen lights up when the Child Lock is activated. Child Lock deactivates when the machine is turned off and on again using the On/ Off button.

5.13 Changing the program after it is

started After the machine starts running, you can change the program you selected to dry your laundry with a different program.

1. For example, to select Extra Dry program instead

of the Iron Dryness, stop the program by pressing the Start / Pause button.

2. Turn the Program Selection knob to select the

3. Start the program by pressing the Start / Pause

button. Adding and removing laundry in stand-by mode If you want to add or remove laundry after the drying program starts:

1. Press the Start/Pause button to take the machine

into Stand-by mode. Drying operation stops.

2. Open the loading door, add or remove laundry and

close the loading door.

3. Start the program by pressing the Start / Pause

The laundry adding made after the drying operation started may cause the dried laundry inside the machine to mix with the wet laundry and the laundry to remain damp after the operation ends.. Laundry adding and removing can be repeated as much as desired during drying operation. But this process would continuously interrupt the drying operation, and so would cause the program duration to lengthen and increase energy consumption. Thus, it is recommended to add laundry before the program starts. If a new program is selected by changing the position of the program selection knob while your machine is in stand-by mode, the running program ends. Do not contact the inner surface of the drum when adding or removing laundry during a continuing program. The drum surface is hot. A warning sound is heard when any button is pressed (except for On/Off button) or the Program Selection knob is turned while the child lock is active. 22 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dryer / User Manual Operating the product

5.14 Canceling the program

If you want to cancel the program and end the drying operation for any reason after the machine starts running, press the On/Off button.

As it will be extremely hot inside the machine when you cancel the program while the machine is in operation; run the ventilation program to cool it down.

When the program ends, the Final/Wrinkle Prevention, Fiber Filter Cleaning and Water Tank Warning leds on the program follow up indicator light up. Loading door can be opened and machine becomes ready for a second run. Press the On/Off button to turn off the machine.

In case the laundry is not removed after the program is completed, the wrinkle prevention program that lasts 2 hours start in order to prevent wrinkling of the laundry that remains inside the machine. Clean the fiber filter after each drying. (See. „Fiber filter and loading door inner surface“) Empty the water tank after each drying. (See. „Emptying the water tank“) Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine 23 / 32 EN 6 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals.

6.1 Cleaning Lint Filter / Loading Door

Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter.

Such fiber and lint are generally formed during wearing and washing.

Clean the entire inner surface of the loading door and loading door gasket with a soft damp cloth. Always clean the lint filter and the inner surfaces of the loading door after each drying process. You can clean the lint filter housing with a vacuum cleaner. To clean the lint filter:

• Open the loading door.
• Remove the lint filter by pulling it up and open the lint filter.
• Clean lint, fiber, and cotton raveling by hand or with a soft piece of cloth.
• Close the lint filter and place it back into its housing.

6.2 Cleaning the sensor

There are dampness sensors in the dryer that detect whether the laundry is dry or not. To clean the sensors:

• Open the loading doorof the dryer.
• Allow the machine to cool down if it is still hot due to the drying process.
• Wipe the metal surfaces of the sensor with a soft cloth, dampened with vinegar and dry them.

A layer can build up on the filter pores that can cause clogging of the filter after using the dryer for a while. Wash the lint filter with warm water to remove the layer that builds up on the lint filter surface. Dry the lint filter completely before reinstalling it. 24 / 32 EN Downloaded from www.Manualslib.com manuals search engine

Clean metal surfaces of the sensors 4 times a year. Do not use metal tools when cleaning metal surfaces of the sensors. Dryer / User Manual Maintenance and cleaning

Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion!

Drain the water in the tank.

If there is lint accumulation in the funnel of the water tank, clean it under running water. Place the water tank into its seat.

6.3 Draining the water tank

Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle.

Condensed water is not drinkable! Never remove the water tank when the program is running! If you forget to drain the water tank, the machine will stop during the subsequent drying cycles when the water tank is full and the Water Tank warning symbol will flash. If this is the case, drain the water tank and press Start / Pause button to resume the drying cycle. To drain the water tank: Pull the drawer and remove the water tank carefully. Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine

If the direct water draining is used as an option, there is no need to empty the water tank.

6.4 Cleaning the filter drawer

Lint and fiber that could not be captured by the lint filter are blocked in the filter drawer behind the kick plate. Filter Drawer Cleaning warning light will light up maximum at every 5 drying cycles as a reminder. There is a two-level filter in the filter drawer. Te first level is the filter drawer sponge and the second level is the filter cloth. To clean the filter drawer:

• Press the kick plate button to open the kick plate.

Remove the filter drawer cover by turning it in the direction of arrow. 25 / 32 EN Maintenance and cleaning

Pull out the filter drawer.

Wash the filter drawer sponge by hand to remove the fiber and lint on the surface. After washing the sponge, squeeze it by hand and remove the excess water. Well-dry the sponge before storing it.

It is not necessary to clean the sponge if lint and fiber accumulation on it is not significant.

Place the sponge back into its place.

Close the filter drawer as to lock the red button.

Place the filter drawer back into its place, turn the filter drawer cover in the arrow direction and close it securely. Open the filter drawer by pressing the red button. Take out the filter drawer sponge. Clean lint, fiber, and cotton raveling on the filter cloth by hand or with a soft piece of cloth. When you notice a layer that may lead clogging on the filter cloth, please clean the layer by washing in warm water. Let the filter cloth dry thoroughly before installing back the filter drawer. 26 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dryer / User Manual Maintenance and cleaning

Close the kick plate cover.

Drying without the filter drawer sponge in place will damage the machine! A dirty lint filter and filter drawer will cause longer drying periods and higher energy consumption.

6.5 Cleaning the evaporator

Clean the lint accumulated on the fins of the evaporator located behind the filter drawer with a vacuum cleaner.

You can also clean by hand provided that you wear protective gloves. Do not attempt to clean with bare hands. Evaporator fins can harm your hand. Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine 27 / 32 EN 7 Troubleshooting Drying process takes too much time.

• Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.
• Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
• Ventilation grids on the front side of the machine are blocked. >>> Remove the objects (if any) that block ventilation in front of the ventilation grids. Ventilation is not sufficient since the room where the machine is installed is very small. >>> Open the door and window of the room to avoid the room temperature increase too much.
• Lime deposit has built up on the dampness sensor. >>> Clean the dampness sensor.
• Excessive laundry is loaded. >>> Do not load the dryer in excess.
• Laundry is not spun sufficiently. >>> Spin your laundry at a higher speed in your washing machine. Laundry comes out wet at the end of drying.

After drying, the hot clothes feel damper than their actual dampness level. It is likely that the selected programme did not suit the laundry type.>>>Checking the care labels on clothes, select appropriate programme for the laundry type or use timer programmes in addition.

• Pores of the lint filter are clogged. >>> Wash the lint filter with warm water.
• Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer.
• Excessive laundry is loaded. >>> Do not load the dryer in excess.
• Laundry is not spun sufficiently. >>> Spin your laundry at a higher speed in your washing machine. Dryer does not switch on or the programme does not start. Dryer does not start when it is set.

It is not plugged in. >>> Make sure that the machine is plugged in. The loading door is ajar. >>> Make sure that the loading door is closed securely. Programme is not selected or the Start / Pause / Cancel button is not pressed. >>> Make sure that the programme is selected and the machine is not in Pause mode. Childproof Lock is activated. >>> Deactivate the Childproof Lock. Programme is interrupted without any cause.

• Loading door is ajar. >>> Make sure that the loading door is closed securely.
• There was a power failure. >>> Press Start / Pause / Cancel button to start the programme.
• Water tank is full. >>> Drain the water tank. Laundry has shrunk, become felted or deteriorated.
• A programme suitable for the laundry type is not used. >>> Check the garment tag and select a programme suitable for the fabric type. Drum lighting does not turn on. (On models with lamp)
• Dryer is not switched on with the On / Off button. >>> Make sure that the dryer is switched on.
• Lamp is defective. >>> Call Authorized Service Agent to have the lamp replaced. End/Anti-creasing symbol is on.
• Anti-creasing programme is activated in order to prevent laundry that has remained in the machine from creasing. >>> Turn off the dryer and take out the laundry. 28 / 32 EN Downloaded from www.Manualslib.com manuals search engine Dryer / User Manual Troubleshooting End symbol is on.
• Programme is over. Turn off the dryer and take out the laundry. Lint Filter Cleaning symbol is on.
• Lint filter is not cleaned. >>> Clean the lint filter. Lint Filter Cleaning symbol is flashing.
• Filter housing is clogged with lints. >>> Clean the lint filter housing.
• A deposit has built up on the lint filter pores that may cause clogging. >>> Wash the lint filter with warm water.
• Filter drawer is clogged. >>> Clean the sponge and the filter cloth in the filter drawer. Water leaks from the loading door
• Lint has accumulated on the inner surfaces of the loading door and on the surfaces of the loading door gasket. >>> Clean the inner surfaces of the loading door and the surfaces of the loading door gasket. Loading door opens spontaneously.
• Loading door is ajar. >>> Push the loading door to close until you hear a locking sound. Water Tank warning symbol is on/flashing.
• Water tank is full. >>> Drain the water tank.
• Water draining hose is bent. >>> If the product is connected directly to a wastewater drain, check the water drain hose. Filter Drawer Cleaning warning symbol is flashing.
• Filter drawer is not cleaned. >>> Clean the sponge and the filter cloth in the filter drawer.

If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself. Dryer / User Manual Downloaded from www.Manualslib.com manuals search engine 29 / 32 EN 8 Electrical Connection Make sure that you have an earthed power outlet socket rated at 13 amps (minimum). Attention! If you use your dryer as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation. Check for suitability. For a permanent connection, a master switch with at least 3mm contact clearance and minumum 13 A rating must be used. Electrical requirements Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position. Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent. A Warning This appliance must be earthed If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store. In order to avoid hazards, damaged supply cord should be replaced by the manufacturer, its service agent or similarly qualified people. 30 / 32 EN Downloaded from www.Manualslib.com manuals search engine

Important Fitting a different plug As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows: 1 Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol or coloured green and yellow or green. 2 Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black. 3 Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red. With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician. Green and yellow or green