I-SENSYS MF446X - Laser MFP CANON - Free user manual and instructions

Product type	Multifunction laser printer
Brand	Canon
Model	I-SENSYS MF446X
Functions	Copy, print, fax, scan
Duplex printing	Yes (automatic)
Document feeder	Duplex (duplex scanning)
Touch screen	Yes (color touch screen)
Network connections	Ethernet (wired) and Wi-Fi (wireless)
Mobile connectivity	AirPrint, Google Cloud Print, Canon Print Service
USB connectivity	USB host port (memory device), USB for PC connection
Paper capacity (standard)	250-sheet cassette + 100-sheet multipurpose tray
Paper sizes	A4, A5, A6, B5, envelopes, letterhead
Secure printing	Yes (PIN code, secure print)
Access rights management	Administrator PIN code, remote interface control
Network security	IPv4/IPv6 firewall, MAC filtering, TLS encryption, IEEE 802.1X
Toner cartridge	User-replaceable (standard type)
Routine maintenance	Cleaning exposure glass, charger, fuser assembly
Software interfaces	UFR II, PCL, PostScript drivers (depending on model), ScanGear MF
Remote management	Remote user interface (Remote UI)

Frequently Asked Questions - I-SENSYS MF446X CANON

How to configure Wi-Fi connection on the I-SENSYS MF446X?

You can configure the connection via WPS (push button or PIN) or manually. Go to Network Settings > Wireless LAN on the touch screen. If your router supports WPS, follow the setup guide. Otherwise, select the SSID and enter the network key.

How to scan a document to a computer?

Install the driver and MF Scan Utility on your PC. Place the original on the glass or in the feeder. On the printer screen, press Scan, choose the destination (computer, email, shared folder). Or use remote scanning from your PC.

What to do in case of a paper jam?

Open the front cover and gently remove the jammed paper. Also check the document feeder and the multipurpose tray. Follow the on-screen instructions. Avoid using wrinkled or too thin paper.

How to replace the toner cartridge?

Open the front cover, remove the old cartridge by pulling the handle. Unpack the new cartridge and insert it until it clicks. Close the cover. The printer automatically initializes the new toner.

How to print a secure document with a PIN code?

In the print properties, enable Secure Print and set a PIN (4 to 7 digits). On the printer, go to Secure Prints, select your document, and enter the PIN to start printing.

How to reset the administrator password?

The default administrator PIN is 7654321 for this model. If you changed it and forgot, you will need to contact Canon support for a factory reset.

The printer does not print from my computer, what should I check?

Check that the printer is powered on and connected to the same network. Make sure the print port is correct (MFNP or TCP/IP). In the printer properties, go to the Ports tab and add the correct port with the printer's IP address.

How to send a fax from the computer (PC Fax)?

Install the Canon fax driver. In your software, select Print then choose the fax driver. Compose the number and send. The printer handles the scanning and transmission.

How to configure fax reception in memory?

Go to Fax Settings > Reception Settings. Enable Memory Reception to store received faxes. You can print or transfer them later.

How to update the printer firmware?

From the remote user interface, log in as an administrator. Go to Device Management > Firmware Update. Follow the instructions to download and install the update from the Canon website.

USER MANUAL I-SENSYS MF446X CANON

MF449x / MF446x / MF445dw / MF443dw