WF331ANW - Washing machine SAMSUNG - Free user manual and instructions
Find the device manual for free WF331ANW SAMSUNG in PDF.
User questions about WF331ANW SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Washing machine in PDF format for free! Find your manual WF331ANW - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WF331ANW by SAMSUNG.
USER MANUAL WF331ANW SAMSUNG
This manual is made with 100% recycled paper.
imagine the possibilities
Thank you for purchasing this Samsung product. To receive more complete service or accessory parts, please register your product at or contact
www.samsung.com/register
features of your new VRT™ washer
1. VRT ^TM (Vibration Reduction Technology)
This Samsung washer performs smoothly at top spin speeds, minimizing noise and vibration.
2. Super capacity
Samsung's extra-large capacity laundry machine can wash a full set of your bedding, a king-size comforter, or up to 26 bath towels in a single load. Since you don't have to do as many loads, you save time, money, water and energy.
3. Deep steam(WF350\*, WF331\*)
The deep steam feature boosts cleaning performance and loosens grime and dirt, thus providing superior cleaning results.
4. Diamond drum ^TM
Take gentle care of your fabrics. With inside holes 36% smaller than those of conventional drums, the diamond drum prevents fabrics from sticking out and consequently being damaged.
5. Woolmark Certified
The machine wash wool cycle on the Samsung machines has been tested and passed the required Woolmark Company specification for machine washable wool products. Fabrics should be washed according to the instructions on the garment label as specified by Woolmark and Samsung.
6. Digital display & Center jog dial
The jog dial enables you to select cycles in both directions with ease, and the display is easy to use and understand.
7. DD(Direct-drive) Motor
The power to handle anything! Our direct-drive inverter motor delivers power right to the washer drum from a variable speed, reversible motor. A beltless direct-drive motor generates a higher spin speed of 1,200 rpm for more effective, quiet operation. The washer also has fewer moving parts, meaning fewer repairs.
8. Sanitize
When selecting this cycle, the water heats to an extra high temperature to remove 99.9% of certain bacteria typically found on clothing, bedding, or towels. This certification is conducted by NSF International, an independent third-party testing and certification organization.
Please check garment care label to avoid garment damage. Only Sanitize cycles have been designed to meet the requirements of this protocol for sanitization efficacy.
NSF Protocol P172 Sanitization Performance of Residential and Commercial, Family-Sized Clothes Washers
9. Pure Cycle ^TM
Using pure cycle helps to keep your washing machine clean even without any chemical detergent or bleach. Keep your drum cleansed and odorless with this specialized cleaning program.
2\_ features of your new VRT™ washer
10. Child Lock
The Child Lock function ensures that curious little hands are kept out of your washing machine.
This safety feature stops your children from playing with the operation of the washing machine, and alerts you when it is activated.
11. Pedestal with storage drawer (Model No: WE357\*)
An optional 15in.(38.1cm) pedestal is available to raise the washer for easier loading and unloading.
It also offers a built-in storage drawer that can hold a 100oz.(6.25 lb) bottle of detergent.
12. Stacking (Model No: SK-3A1/XAA, SK-4A/XAA, SK-5A/XAA)
Samsung's washers and dryers can be stacked to maximize usable space. An optional stacking kit is available for purchase from your Samsung retailer.
natural_image
Line drawing of a washing machine with control panel and door (no text or symbols)
natural_image
Line drawing of two stacked washing machines (no text or symbols)safety information
Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your washer's many benefits and features.
WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your washer.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual mean:
  | Hazards or unsafe practices that may result insevere personal injury or death.To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow these basic safety precautions: |
[T60C] | Hazards or unsafe practices that may result inminor personal injury or property damage. |
 | Do NOT attempt. |
| [6205] | Do NOT disassemble. |
 | Do NOT touch. |
 | Follow directions explicitly. |
 | Unplug the power plug from the wall socket. |
| [ZZKK] | Make sure the machine is grounded to prevent electric shock. |
 | Call the service center for help. |
 | Note |
These warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.
Read all instructions before using the appliance.
SAVE THESE INSTRUCTIONS
4_ safety information
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:
- Read all instructions before using the appliance.
- Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode.
- Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
- Before the appliance is removed from service or discarded, remove the door to the washing or drying compartment.
- Do not reach into the appliance if the drum is moving.
- Do not install or store this appliance where it will be exposed to the weather.
- Do not tamper with controls.
- Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.
- Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
- Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washer or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
SAVE THESE INSTRUCTIONS
safety information
safety information
SEVERE WARNING SIGNS FOR INSTALLATION
Plug the power cord into an AC 120V/60Hz/15A wall socket or higher and use the socket for this appliance only. In addition, do not use an extension cord.
- Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.
- Do not use an electric transformer. It may result in electric shock or fire.
- Ensure that the power voltage, frequency and current are the same as those of the product specifications. Failing to do so may result in electric shock or fire.
The installation of this appliance must be performed by a qualified technician or service company.
- Failing to do so may result in electric shock, fire, an explosion, problems with the product, or injury.
Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failing to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor.
- If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fire, an explosion, or problems with the product
- Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes.
Do not install this appliance near a heater, inflammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).
Do not install this appliance in a location where gas may leak.
- This may result in electric shock or fire.
Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord or loose wall socket.
- This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.
- This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug. - Unplug the power plug by holding the plug.
- Failing to do so may result in electric shock or fire.
When the power plug or power cord is damaged, contact your nearest service center.
CAUTION SIGNS FOR INSTALLATION
This appliance should be positioned in such a way that it is accessible to the power plug.
- Failing to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
- Failing to do so may result in abnormal vibrations, noise, or problems with the product.
SAVE THESE INSTRUCTIONS
6_ safety information
Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm.
- Failing to do so may result in electric shock or fire.
SEVERE WARNING SIGNS FOR USING
If the appliance is flooded, cut the power immediately and contact your nearest service center.
If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and contact your nearest service center.
- Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do not touch the appliance or power cord.
- Do not use a ventilating fan.
- A spark may result in an explosion or fire.
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other flammable or explosive substances.
- This may result in electric shock, fire or an explosion.
Do not open the washer door by force while it is operating (high-temperature washing/drying/spinning).
- Water flowing out of the washer may result in burns or cause the floor to be slippery. This may result in injury.
- Opening the door by force may result in damage to the product or injury.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using it.
Do not insert your hand under the washer.
- This may result in injury.
Do not touch the power plug with wet hands.
- This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in progress.
- Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire.
Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.
- If a child places a bag over its head, it may result in suffocation.
Do not let children or infirm persons use this washer unsupervised.
- Failing to do so may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washer while it is operating.
- This may result in injury.
Make sure the detergent drawer is closed before you put laundry into the washer or remove laundry from the washer.
- If the detergent drawer is open, you could strike the drawer with your head and injure yourself.
Do not attempt to repair, disassemble, or modify the appliance yourself.
- Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.
- When repairing or reinstalling the appliance is required, contact your nearest service center.
- Failing to do so may result in electric shock, fire, problems with the product, or injury.
If any foreign substance such as water has entered the appliance, unplug the power plug and contact your nearest service center.
- Failing to do so may result in electric shock or fire.
When the water supply hose comes loose from the faucet and floods the appliance, unplug the power plug.
- Failing to do so may result in electric shock or fire.
SAVE THESE INSTRUCTIONS
safety information
CAUTION SIGNS FOR USING
When the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.
- Failing to do so may result in discoloration, deformation, damage or rust.
The front glass may be broken by a strong impact. Take care when using the washer. - When the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the faucet slowly. Open the faucet slowly after a long period of non-use.
- The air pressure in the water supply hose or the water pipe may result in damage to a part or in water leakage.
If a drain error occurs during an operation, check if there is a draining problem.
- If the washer is used when it is flooded because of a draining problem, it may result in electric shock or fire due to electric leakage.
Insert the laundry into the washer completely so that laundry does not get caught in the door.
- If laundry gets caught in the door, it may result in damage to the laundry or the washer, or result in water leakage.
Ensure that the faucet is turned off when the washer is not being used.
- Ensure that the screw on the water supply hose connector is properly tightened.
- Failing to do so may result in property damage or injury.
Take care that the Rubber Seal and the Front Door Glass are not contaminated by a foreign substance (e.g. waste, thread, hair, etc.)
- If a foreign substance is caught in the door or the door is not completely closed, it may cause a water leakage.
Open the faucet and check if the water supply hose connector is firmly tightened and that there is no water leaking before using the product.
- If the screws or the water supply hose connector are loose, it may result in water leakage.
Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
- This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
- This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
- As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.
Do not place an object that generates a electromagnetic field near the washer.
- This may result in injury due to a malfunction.
Since the water drained during a high-temperature wash or drying cycle is hot, do not touch the water.
- This may result in burns or injury.
Do not wash, spin or dry water-proof seats, mats or clothing (*).
- Do not wash thick, hard mats even if the washer mark is on the care label.
- This may result in injury or damage to the washer, walls, floor or clothing due to abnormal vibrations.
* Woolen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers, sweat suits, and bicycle, motor cycle, car covers, etc.
Do not operate the washer when the detergent box is removed.
- This may result in electric shock or injury due to water leakage.
SAVE THESE INSTRUCTIONS
8\_ safety information
Do not touch the inside of the tub during or just after drying as it is hot.
- This may result in burns.
Do not insert your hand into the detergent box after opening it. - This may result in injury as your hand may be caught by the detergent input device.
Do not place any objects (such as shoes, food waste, animals) other than laundry into the washer.
- This may result in damage to the washer, or injury and death in the case of pets due to the abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knives, fingernails, etc.
- This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics.
- This may result in the rubber seal becoming deformed and water leakage.
Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long periods of time.
- This may cause the tub to rust.
- If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent.
- This may result in spontaneous combustion or ignition due to the heat of the oxidation of the oil.
Do not use hot water from water cooling/heating devices.
- This may result in problems with the washer.
Do not use natural hand-washing soap for the washer.
- If it hardens and accumulates inside the washer, it may result in problems with the product, discoloration, rust or bad odors.
Do not wash large laundry items such as bedding in the washing net.
- Place socks and brassieres into the washing net and wash them with the other laundry.
- Failing to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
- If it accumulates inside the washer, it may result in water leakage.
Do not wash throw rug or doormat.
- If you wash throw rug or doormat, the sand will accumulate inside the washer. It may result in error such as not draining.
SEVERE WARNING SIGNS FOR CLEANING
Do not clean the appliance by spraying water directly onto it.
Do not use benzene, thinner or alcohol to clean the appliance.
- This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
- Failing to do so may result in electric shock or fire.
SAVE THESE INSTRUCTIONS
contents
SETTING UP YOUR WASHER
11
WASHING A LOAD OF LAUNDRY
17
CLEANING AND MAINTAINING YOUR WASHER
25
TROUBLESHOOTING AND INFORMATION CODES
29
APPENDIX
33
WARRANTY
36
11 Checking the parts
12 Meeting installation requirements
12 Electrical supply
12 Grounding
12 Water
12 Drain facility
13 Flooring
13 Location consideration
13 Alcove or closet installation
13 Undercounter installation(washer only)
14 With optional pedestal base or stacking kit
15 Installing your washer
17 Loading your washer
17 Getting started
18 Overview of the control panel
20 Child Lock
20 Garment+
21 Washing clothes using the cycle selector
22 Using steam wash
22 Detergent use
23 Features
25 Cleaning the exterior
25 Cleaning the interior
25 Cleaning the dispensers
26 Storing your washer
26 Cleaning the debris filter
27 Cleaning the door seal
27 Preserving the top cover and the front frame
28 Pure Cycle ^TM
29 Check these points if your washer...
31 Information codes
33 Fabric care chart
34 Helping the environment
34 Declaration of conformity
34 Specification
35 Cycle chart
36 Warranty
10_ contents
setting up your washer
CHECKING THE PARTS
Unpack your washer and inspect it for shipping damage. Make sure you have received all of the items shown below. If your washer was damaged during shipping, or you do not have all of the items, contact 1-800-SAMSUNG(726-7864).
To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.
Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.
- If a child places a bag over its head, it may result in suffocation.
Parts supplied
 | ||
 | (use for the Upper Bolt Hole) |   |
| ∅∅∅∅ | ||
| Wrench | Bolt hole covers | Water supply hoses |
 |  |  |
| Hose guide | Plastic zip hose tie | Manual book |
| Tools needed | ||
 |  | |
| Pliers | Flat screwdriver | |
setting up your washer
MEETING INSTALLATION REQUIREMENTS
Electrical supply
• 120 Volt 60 Hz 15 AMP fuse or circuit breaker
- An individual branch circuit serving only your washer is recommended.
- Your washer is equipped with a power cord.
Never use an extension cord.
Grounding
ELECTRICAL GROUNDING IS REQUIRED ON THIS APPLIANCE.
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance – if it does not fit the outlet, have a proper outlet installed by a qualified electrician.
IMPORTANT SAFETY PRECAUTIONS
- To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision and local codes and ordinances. It is the personal responsibility of the appliance owner to provide adequate electrical service for this appliance.
Never connect ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Water
To correctly fill your washer in the proper amount of time, water pressure of 20-116psi(137-800kPa) is required. Water pressure less than 20 psi(137kPa) may cause water valve failure, or may not allow the water valve to shut off completely. Or, it may extend the fill time beyond what your washer controls allow, resulting in your washer turning off. A time limit is built into the controls in the event of an internal hose becoming loose and flooding your home.
The water faucets must be within 4 ft.(122cm) of the back of your washer for the inlet hoses provided with your washer.
Accessory inlet hoses are available in various lengths up to 10 ft.(305cm) for faucets that are further away from the back of your washer.
To avoid the possibility of water damage:
- Have water faucets easily accessible.
- Turn off faucets when the washer is not in use.
• Periodically check that there is no leakage from the water inlet hose fittings.
Check all connections at the water valve and faucet for leaks.
Drain facility
The recommended height of the standpipe is 18 in (46 cm). The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory.
12\_ setting up your new washing machine
Flooring
For best performance, your washer must be installed on a solidly constructed floor. Wood floor may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting and soft tile surfaces are contributing factors in vibration and may cause your washer to move slightly during the spin cycle.
CAUTION
Never install your washer on a platform or weakly supported structure.
Location consideration
Do not install your washer in areas where water may freeze, since your washer will always maintain some water in its water valve, pump, and hose areas. This can cause damage to the pump, hoses and other components.
Alcove or closet installation
MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:
Sides - 1 In.(2.5 cm)
Top - 17 In.(43.2 cm)
Rear - 4 In. (10.2 cm)
Closet Front - 2 In. (5.1 cm)
If the washer and dryer are installed together, the closet front must have at least a 72 in ^2 (465cm ^2 ) unobstructed air opening. Your washer alone does not require a specific air opening.
A. Recessed area
B. Side view - closet or confined area
Undercounter installation(washer only)
setting up your washer
With optional pedestal base or stacking kit
Required Dimensions for Installation With Pedestal
Required Dimensions for Installation With Stacking Kit
* Required spacing
** External exhaust elbow requires additional space.
14_ setting up your new washing machine
STEP 1
Selecting a location
Before you install the washer, make sure the location:
- Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight. - Has adequate ventilation.
- Will not be freezing (below 32^ or 0^ ).
• Is away from heat sources such as oil or gas. - Has enough space so that the washer doesn't stand on its power cord.
STEP 2
Removing the shipping bolts
Before using your washer, you must remove the four shipping bolts from the back of the unit.
- Loosen all the bolts with the supplied wrench.
- Slide the bolt and spacer up and remove the bolt with the spacer through the hole in the rear wall of your washer. Repeat for each bolt.
- Fill the holes with the supplied bolt hole covers.
- Keep the shipping bolts and spacers for future use.
STEP 3
Installing your washer
- Place the drain hose in the drain facility. Be sure an airtight connection is NOT made between the drain hose and the standpipe. The standpipe must be at least 18in.(46 cm) high.
Caution must always be exercised to avoid collapsing or damaging the drain hose. For best results, the drain hose should not be restricted in any way – by elbows, couplings, or excessive lengths. For situations where the drain hose cannot be conveniently elevated to at least 18in.(46 cm), the drain hose must be supported.
- Before connect the inlet hoses to water faucets, check to ensure a washer is inside coupling.
setting up your washer
- Check the inlet hose to ensure a washer is inside each fill hose. Thread the inlet hoses to the HOT and COLD faucet connections.
On the other end of the hose, check for one rubber washer per hose and install each fill hose to the water valve. Make sure the hose with the Hot printed line is attached to the HOT faucet.
Tighten by hand until snug, then two-thirds of a turn with pliers.
For correct water use, connect both HOT and COLD water valves. If either or both are not connected, an "nF" (no fill) error can occur.
- Turn on the HOT and COLD water supply and check all connections at the water valve and the faucet for leaks.
- Plug the power cord into a 3-prong, well grounded 120 volt 60 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker.
Your washer is grounded through the third prong of the power cord when plugged into a three-prong grounded receptacle.
natural_image
Illustration of a plug inserted into an electrical outlet (no text or symbols)-
Slide your washer into position.
-
Level your washer by turning the leveling legs in or out as necessary by hand or by using the wrench included with your washer.
When your washer is level, tighten the locking nuts using the wrench or (-) flathead screwdriver.
Your washer must be leveled on all four sides. A carpenter's level should be used on all four corners of your washer. It's the best to recheck after the first dozen washes.
natural_image
Illustration of a hand using a tool to adjust a mechanical component with an arrow indicating rotation (no text or symbols present)Avoid damage to the legs. Do not move the washer unless the locking-nuts are fastened to the bottom of the washer.
natural_image
Two diagrams showing a crossed-out electrical switch symbol (no text or labels present)16\_ setting up your new washing machine
washing a load of laundry
LOADING YOUR WASHER
- You can fill the tub with dry, unfolded clothes; but DO NOT OVERLOAD the tub.
- Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or wrinkling of the load.
- Wash delicate items such as bras, hosiery, and other lingerie in the delicates cycle with similar lightweight items.
- When washing big bulky items or a few smaller items that don't fill the tub completely – a rug, a pillow, stuffed toys, or one or two sweaters, for example – add a few towels to improve tumbling and spin performance.
During the spin cycle, the washer may add additional water to redistribute the excessive imbalance inside the tub.
-
When washing heavily soiled loads, do not overload your washer in order to assure good cleaning results.
• To add a forgotten item: -
Press the Power button.
- Press the Start/Pause button.
- Wait for the door lock light to go out (Immediately).
- Add the item, close the door, and press the Start/Pause button.
The door safety state continues for 15 seconds and the cycle is restarted.
To ensure thorough cleaning, add items within five minutes of starting the wash cycle.
GETTING STARTED
- Load your washer.
- Close the door.
Push the laundry into the tub completely to prevent the laundry from being caught in the door or from falling out of the tub.
- Press the Power button.
- Add detergent and additives to the dispenser (See page 23\~24).
- Select the appropriate cycle and options for the load (See page 18\~19).
- Press the Start/Pause button.
- The Wash Indicator will illuminate.
- The estimated cycle time will appear in the display.
The time may fluctuate to better indicate the time remaining in the cycle.
The actual time required for a cycle may differ from the estimated time in the display depending on the water pressure, water temperature, detergent, and laundry.
- Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain.
- When the cycle is complete, the door lock light will go out and "End" will appear in the display.
- DO NOT attempt to open the door until the door lock light is off. To add a forgotten item, see “Loading your washer” section (See page 17).
- When your washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle continues.
- Pressing the Power button cancels the cycle and stops your washer.
- The Wash, Rinse and Spin indicators will illuminate during those portions of the cycle.
Do not place anything on top of your washer while it is running.
washing a load of laundry
OVERVIEW OF THE CONTROL PANEL
WF350\*, WF331\*
Steam Cycles
WF340\*, WF330\*
1 Cycle Selector
Select the appropriate cycle for the type of load.
This will determine the tumble pattern and spin speed for the cycle.
To minimize wrinkling of your laundry, select the Perm Press cycle.
Normal - For most fabrics including cottons, linens, and normally soiled garments.
Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments.
Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally soiled garments.
Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to 150^ F(65.6°C) to eliminate bacteria.
If Pause is selected during the heating portion of the Sanitize cycle, your washer door will remain locked for your safety.
Bedding - For bulky items such as blankets and sheets. When you are washing comforters, use liquid detergent.
Deep steam(WF350*, WF331*) - For heavily soiled, colorfast garments, this cycle provides high washing temperature and steam and is efficient in cleaning stains.
Delicates - For sheer fabrics, bras, lingerie silk, and other handwash-only fabrics. For best results, use liquid detergent.
Hand Wash - For handwashable, special care garments.
Wool - For machine-washable wool. Loads should be under 8 pounds.
- The Wool cycle washes laundry by moving the wash drum horizontally to maintain the characteristics of the wool fibers and to prevent damaging the cloth. It then stops for a while to allow the laundry to soak in the water.
- It is recommended using a neutral detergent to prevent damage to the cloth and to improve the washing results.
WOOLMARK
APPAREL CARE
The Wool cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washer, M1002 (Woolmark approval number).
| Quick Wash - For lightly soiled garments needed quickly.Rinse + Spin - Use for loads that need rinsing only or to add rinse-added fabric softener to a load. | |
| 2 Digital graphic display | Displays the remaining cycle time, all cycle information, and error messages. |
| 3 Temperature selection button | Press the button repeatedly to cycle through the different water temperature options.Hot/Cold - Whites and heavily soiled, colorfast items.Warm/Warm - Colorfast items. When warm rinse is selected, only the final rinse will be warm.The other rinses will be cold to conserve energy.Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items.Cold/Cold - Brightly colored, very lightly soiled items. |
| 4 Spin selection button | Press the button repeatedly to cycle through the different spin speed options.High - Use for underwear, t-shirts, jeans and sturdy cottons.Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics.Low - Use for delicate items needing a slow spin speed.No Spin - Drains your washer without spinning. Use for extremely delicate items that cannot tolerate any spin. Press and hold the button for approximately 2 seconds to get spin only cycle. It provides a spin to remove more water. |
| 5 Soil Level selection button | Press the button to select the soil level/washing time.(Heavy → Normal → Light)Heavy - For heavily soiled loads.Normal - For moderately soiled loads. This setting is best for most loads.Light - For lightly soiled loads. |
| 6 Signal selection button | Press the button to increase or decrease the end of cycle signal volume or turn off the signal. |
| 7 Wash Option selection buttons | Press these buttons to select different cycle options.Pre Wash - To use this feature add detergent to the pre wash section of the detergent compartment. When turned on, the washer fills with cold water and detergent, tumbles, then drains and advances to the selected wash cycle. Some cycles cannot be selected with this option (See page 35).You cannot select the prewash option in the Delicate, Wool, Quick Wash, Hand Wash and Rinse+Spin cycles.Steam(WF350*, WF331*) - Press this button to use the Steam Wash function. Steam Wash is available with Heavy Duty, Normal, Perm Press, Sanitize, Bedding cycles. For heavily soiled, colorfast garments, Steam Wash improves stain treatment and use less water of each cycle (See page 35).Extra Rinse (WF340*, WF330*) - Add an additional rinse at the end of the cycle to more thoroughly remove laundry additives and perfumes.Pure Cycle - Use for drum cleaning. It cleanses the drum of dirt and bacteria. Regular use (after every 40 washes) is recommended. No detergent or bleach needed (see pages 28).Delay Start - Any cycle can be delayed for 1 to 24 hours in one-hour increments. The displayed hour indicates the time at which the wash will be started. |
| 8 Start/Pause selection button | Press to pause and restart programs. |
| 9 Power button | Press once to turn your washer on, press again to turn your washer off. If the washer is left on for more than 10 minutes without any buttons being touched, the power automatically turns off. |
washing a load of laundry
Child Lock
This function prevents children from playing with your washer.
Activating the Child Lock function
Press and hold both the Spin and Soil Level buttons simultaneously for approximately 3 seconds.
- If the Child Lock function is activated, the door is locked and the "Child Lock [💡]" lamp is lit.
- If the Start/Pause button is pressed after the Child Lock function is activated, none of the buttons will work except for the Power button.
- If a button is pressed when the buttons are locked, the "Child Lock [💡]" lamp blinks.
Pausing the Child Lock function
When the door is locked or the buttons are locked by the Child Lock function, you can pause the Child Lock operation for 1 minute by pressing and holding both the Spin and Soil Level buttons simultaneously for approximately 3 seconds.
- If Child Lock mode is paused temporarily, the door lock is released for 1 minute for user convenience. During this period, the “Child Lock [💡]” lamp blinks.
- If the door is opened after the minute is over, an alarm sounds for up to 2 minutes.
- If the door is closed within the 2 minutes, the door is locked and the Child Lock function is reactivated. If the door is closed after the 2 minutes, the door will not be locked automatically and no alarm will be heard.
Deactivating the Child Lock function
Press and hold both the Spin and Soil Level buttons simultaneously for approximately 6 seconds.
- If the Child Lock function is deactivated, the door is unlocked and the "Child Lock [💡]" is turned off.
- Child Lock is a function to prevent children or the infirm from accidentally operating the washer and injuring themselves.
- If a child enters the washing machine, the child may become trapped and suffocate.
- Once the Child Lock function is activated, the Child Lock function continuous working even if the power is turned off.
- Opening the door by force can result in injury due to damage to the product.
To add laundry when the Child Lock function is activated, you have to first pause or deactivate the Child Lock function.
If you want to open the door of the washing machine when the Child Lock function is activated:
- Pause or deactivate the Child Lock function.
- Turn the washing machine off and then on again.
Garment+
You can add or take out laundry items even after the wash has started, as long as the "Garment+ 📋" light is turned on. Pressing the Start/Pause button unlocks the door, unless the water is too hot or if there is too much water in your washer. If you are able to unlock the door and wish to continue the wash cycle, close the door and press the Start/Pause button.
Washing clothes using the cycle selector
Your new washer makes washing clothes easy, using Samsung's “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.
- Press the Power button.
- Open the door.
- Load the articles of clothing one at a time loosely into the tub, without overfilling it.
- Close the door.
- Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate compartments.
Pre-wash is only available when selecting the Normal, Perm Press, Sanitize, Bedding and Deep Steam cycles. It is only necessary if your clothing is heavily soiled(See page 35).
-
Use the Cycle Selector to select the appropriate cycle according to the type of material: Normal, Perm Press, Sanitize, Bedding, Delicates, Hand Wash, Wool, Quick Wash, Rinse + Spin, Deep Steam. The relevant indicators will illuminate on the control panel.
-
At this time, you can control the wash temperature, the number of rinse cycles, the spinning speed, and the delay time by pressing the appropriate Option button.
-
Press the Start/Pause button on the Cycle Selector and the wash will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
To unlock the door when the "Garment+" light is turned on, press the Start/Pause button.
- Within 5 minutes of starting a wash, you can still add/remove laundry items to the wash.
- Press the Start/Pause button to unlock the door.
- The door cannot be opened when the water is too HOT or the water level is too HIGH.
- After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
When the cycle is complete, "End" is displayed and the power remains on.
The power is turned off in the following two cases.
- When the Power button is pressed.
- If the door is opened when "End" is displayed.
washing a load of laundry
USING STEAM WASH
The Steam Wash function injects steam directly into the laundry in the wash tub to increase the wash temperature and enhance the soak effect, thus improving the wash performance.
- Load the washer.
- Press the Power button.
- Turn the Cycle Selector and select a steam cycle. (The Deep Steam cycle automatically selects the Steam Wash function.)
- Press the Steam button.
- Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked line.
- Press the Start/Pause button.
: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.
Steam may not necessarily be visible during the steam cycles.
Steam may not be present during entire steam wash cycle.
DETERGENT USE
Your washer is designed to use high efficiency (HE) detergents.
- For best cleaning results, use a high efficiency detergents such as Tide HE, Wisk HE, Cheer HE or Gain HE*. High efficiency detergents contain suds suppressors that reduce or eliminate suds. When fewer suds are produced, the load tumbles more efficiently and cleaning is maximized.
natural_image
Abstract logo design with stylized 'he' letters inside an oval frame (no text or symbols)
CAUTION
Regular detergent is not recommended. Please use HE detergents only.
Reducing the amount of detergent may reduce the cleaning quality. It is important to pre-treat stains, sort carefully by color and soil level, and avoid overloading.
* Brand names are trademarks of their respective manufacturers.
22_ washing a load of laundry
FEATURES
Automatic dispenser
Your Washer has separate compartments for dispensing detergent and color-safe bleach, chlorine bleach, and fabric softener. All laundry additives are added to their respective compartments before starting your Washer.
The automatic dispenser MUST ALWAYS be in place before starting your Washer.
DO NOT open the automatic dispenser when your washer is running.
To use:
- Never exceed the manufacturer's recommendations when adding detergent.
- This compartment holds liquid detergent for the main wash cycle, which is added to the load at beginning of cycle.
When using powdered detergent, remove the detergent liquid from the compartment. Powdered detergent will not dispense with detergent liquid.
Detergent compartment
- Pour the recommended amount of laundry detergent directly into the detergent compartment before starting your washer.
- If color-safe bleach is to be used, it should be added with detergent to the detergent compartment.
When adding color-safe bleach with detergent, it is best if both laundry products are in the same form – granular or liquid.
Pre Wash compartment
When using the Pre Wash option, detergent should be added to both the Pre Wash compartment and the detergent compartment. The detergent will automatically be dispensed during Pre Wash.
- If high efficiency (HE) detergent is used, add 1/3 of the recommended amount to the Pre Wash compartment and 2/3 of the recommended amount to the detergent compartment.
washing a load of laundry
Bleach compartment
(Liquid chlorine bleach only)
- Add chlorine bleach to the bleach compartment. DO NOT exceed the MAX FILL line.
- Avoid splashing or over-filling the compartment.
- Your washer automatically dispenses bleach into the tub at the appropriate time.
- The dispenser automatically dilutes liquid chlorine bleach before it reaches the wash load.
- Never pour undiluted liquid chlorine bleach directly onto the load or into the tub. It is a powerful chemical and can cause fabric damage, such as weakening of the fibers or color loss, if not used properly.
- If you prefer to use color-safe, non-chlorine bleach, add it to the detergent compartment. DO NOT pour color-safe bleach into the Bleach compartment.
Fabric softener compartment
- Pour the recommended amount of liquid fabric softener into the softener compartment. For smaller loads, use less than one capful.
- Fabric softener should be diluted with water until it reaches MAX FILL in the compartment.
- The dispenser automatically releases liquid fabric softener at the proper time during the rinse cycle.
- Use the softener compartment ONLY for liquid fabric softeners.
- DO NOT use a Downy Ball* in the Fabric softener compartment of this washer. It will not add fabric softener at the appropriate time.
Use the detergent compartment.
* Brand names are trademarks of their respective manufacturers.
cleaning and maintaining your washer
Keeping your washer clean improves its performance, wards off unnecessary repairs, and lengthens its life.
CLEANING THE EXTERIOR
Turn off the water faucets after finishing the day's washing.
This will shut off the water supply to your washer and prevent the unlikely possibility of damage from escaping water. Leave the door open to allow the inside of your washer to dry out.
Use a soft cloth to wipe up all detergent, bleach or other spills as they occur.
Clean the following as recommended:
Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads. Do not spray cleaners directly on the panel.
Cabinet – Clean with soap and water.
CLEANING THE INTERIOR
Clean the interior of your washer periodically to remove any dirt, soil, odor, mold, mildew, or bacterial residue that may remain in your washer as a result of washing clothes.
Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent stains on your washer or laundry.
Hard water deposits may be removed, if needed. Use a cleaner labeled “washer safe”.
CLEANING THE DISPENSERS
The automatic dispenser may need to be cleaned periodically due to laundry additive buildup.
- Pull out the detergent liquid from detergent compartment.
- Remove the siphon cap from the fabric softener and bleach compartments.
- Wash all of the parts under running water.
- Clean the dispenser recess with a soft brush.
- Reinsert the siphon cap and push it firmly into place.
- Push the dispenser back into place.
- Run a Rinse+Spin cycle without any load in your washer.
natural_image
Line drawing of a hand inserting a small component into a device casing (no text or symbols)
cleaning and maintaining your washer
STORING YOUR WASHER
Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare your washer for storage as follows:
- Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your washer through the cycle without a load.
- Turn the water faucets off and disconnect the inlet hoses.
- Unplug your washer from the electrical outlet and leave your washer door open to let air circulate inside the tumbler.
- If your washer has been stored in below-freezing temperatures, allow time for any leftover water in your washer to thaw out before use.
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed.
- Open the filter cover by pressing and pulling the handle of the filter cover with your finger.
- Unscrew the drain cap by turning it counterclockwise.
- Hold the cap on the end of the drain tube and slowly pull it out about 6 in.(15 cm) and drain off all the water.
- Remove the debris filter cap.
- Wash any dirt or other material from the debris filter. Make sure the drain pump propeller behind the debris filter is not blocked.
natural_image
Illustration of hands using a tool to adjust or install a component on a sink (no text or symbols visible)
natural_image
Illustration of a kitchen appliance with a hand pointing to a speaker grille (no text or symbols)- To assemble the filter cap, align the projected part of the filter cap to your 12 o'clock (on an imaginary clock) and turn it clockwise.
- Replace the debris filter cap.
- Replace the filter cover.
CLEANING THE DOOR SEAL
-
Open the washer door and remove any clothing or items from the washer.
-
Inspect the gray colored seal between the door opening and the basket for stained areas. Pull back the seal to inspect all areas under the seal and to check for foreign objects.
- If stained areas are found, wipe down these areas of the seal, using the procedure that follows.
a) Mix a dilute solution, using 34 cup (177 mL) of liquid chlorine bleach, and 1 gal. (3.8 L) of warm tap water.
b) Wipe the seal area with the dilute solution, using a damp cloth.
c) Let stand 5 minutes.
d) Wipe down area thoroughly with a dry cloth and let the washer interior air dry with door open.
IMPORTANT:
- Wear rubber gloves when cleaning for prolonged periods.
- Refer to the bleach manufacturer's instructions for proper use.
PRESERVING THE TOP COVER AND THE FRONT FRAME
Do not place any heavy or sharp objects or a detergent box on the washer. Keep them in the purchased pedestal or in a separate storage box.
CAUTION
This may scratch or damage the top cover. There is also a danger of the box or object falling.
Since the entire washer has a high-gloss finish, the surface can be scratched or damaged. Therefore, avoid scratching or damaging the surface when using the washer.
cleaning and maintaining your washer
PURE CYCLE™
This course is a self-cleaning course that removes mold that may occur inside the washing machine.
- Press the Power button.
- Press the Pure Cycle ^TM button.
- You can only use the Delay Start function.
- Press the Start/Pause button.
- If you press the Start/Pause button, the Pure Cycle course begins.
• Using the Pure Cycle course, you can clean the drum without using a cleansing agent.
- Never use the Pure Cycle course when laundry is in the washing machine. This may result in damage to the texture or a problem with the washing machine.
- If you want to use drum cleansing agent, use only 1/10 of the amount of the drum cleansing agent recommended by the cleansing agent manufacturer.
The Pure Cycle Auto Alarm Function
- If the “Pure Cycle” button is lit after a wash, it indicates that tub (drum) cleaning is required. In this case, remove the laundry from the washing machine, turn the power on, and clean the drum by performing the Pure Cycle course.
- If you do not perform the Pure Cycle course, the “Pure Cycle” indicator is turned off. However, the “Pure Cycle” indicator will light after two washes have been performed. This will not result in a problem with the washing machine.
- Although generally, the Pure Cycle Auto Alarm appears once a month or so, the frequency may differ depending on the number of times the washing machine is used
troubleshooting and information codes
CHECK THESE POINTS IF YOUR WASHER...
| PROBLEM | SOLUTION |
| Will not start. | Make sure the door is firmly closed.Make sure your washer is plugged in.Make sure the water source faucets are open.Make sure to press theStart/Pausebutton to start your washer.Make sure the Child Lock is not activated (page 20).Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain.Check the fuse or reset the circuit breaker. |
| Has no water or not enough water. | Turn both faucets on fully.Make sure the door is tightly closed.Straighten the water inlet hoses.Disconnect hoses and clean screens. Hose filter screens may be clogged.Open and close the door, then press theStart/Pausebutton. |
| Has detergent remains in the automatic dispenser after the wash cycle is complete. | Make sure your washer is running with sufficient water pressure.Make sure the Detergent Selector dial is in the upper position when using granular detergent. |
| Vibrates or is too noisy. | Make sure your washer is set on a level surface. If the surface is not level, adjust your washer feet to level the appliance.Make sure that the shipping bolts are removed.Make sure your washer is not touching any other object.Make sure the laundry load is balanced. |
| Stops | Plug the power cord into a live electrical outlet.Check the fuse or reset the circuit breaker.Close the door and press theStart/Pausebutton to start your washer.For your safety, your washer will not tumble or spin unless the door is closed.Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain.There may be a pause or soak period in the cycle. Wait briefly and it may start.Check the screens on the inlet hoses at the faucets for obstructions.Clean the screens periodically. |
troubleshooting and information codes
| PROBLEM | SOLUTION |
| Fills with the wrong temperature water. | Turn both faucets on fully.Make sure the temperature selection is correct.Make sure the hoses are connected to the correct faucets.Flush water lines.Check the water heater. It should be set to deliver a minimum 120°F(49°C) hot water at the tap. Also check the water heater capacity and recovery rate.Disconnect the hoses and clean the screens. The hose filter screens may be plugged.As your washer is filling, the water temperature may change as the automatic temperature control feature checks incoming water temperature. This is normal.While your washer is filling, you may notice just hot and/or just cold water going through the dispenser when cold or warm wash temperatures are selected. This is a normal function of the automatic temperature control feature as your washer determines the temperature of the water. |
| Door locked or will not open. | Press the Start/Pause button to stop your washer.Your washer door will remain locked during the heating portion of the Sanitize cycle.It may take a few moments for the door lock mechanism to disengage. |
| Does not drain and/or spin. | Check the fuse or reset the circuit breaker.Straighten the drain hoses. Eliminate kinked hoses. If there is a drain restriction, call for service.Close the door and press the Start/Pause button. For your safety, your washer will not tumble or spin unless the door is closed. |
| Load is too wet at the end of the cycle. | Use the High or Extra High spin speed.Use high efficiency detergent to reduce over-sudsing.Load is too small. Very small loads (one or two items) may become unbalanced and not spin out completely. |
| Leaks water. | Make sure the door is firmly closed.Make sure all hose connections are tight.Make sure the end of the drain hose is correctly inserted and secured to the drainage system.Avoid overloading.Use high efficiency detergent to prevent over-sudsing. |
| Has excessive suds. | Use high efficiency detergent to prevent over-sudsing.Reduce the detergent amount for soft water, small or lightly soiled loads.Non-HE detergent is NOT recommended. |
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your washer.
| CODE SYMBOL | MEANING | SOLUTION |
| dc | Unbalanced load prevented your washer from spinning. | Redistribute the load, press the Start/Pause button. |
| dL | Door is unlocked when washer is running. | Press the Power button to turn off your washer, then restart the cycle. If the code reappears, call for service. |
| dS | Door is open when washer is running. | Close the door tightly and restart the cycle. If the code reappears, call for service. |
| FL | Your washer failed to lock the door. | Close the door tightly and restart the cycle. If the code reappears, call for service. |
| Hr | Water temperature control problem.(Heater control problem) | Call for service. |
| LE | Your washer has tried to fill but has not reached the proper water level. | Call for service. |
| LO | The door will not unlock. | Make sure the door is firmly closed. Press the Power button to turn off your washer, then turn it on again. If the code reappears, call for service. |
| nd | Your washer is not draining. It can also mean that the unit senses a small clog while draining. | First of all, clean up the drain filter. Then check the following. Clean the filter (See page 26). or1. Turn off the unit for 10 seconds and then turn it on again.2. Select the Spin Only cycle (See page 19).3. Press the Start/Pause to drain the water. If it still does not drain, call for service. |
| nF | Your washer has tried to fill but was unsuccessful. | Make sure the water faucets are open all the way. Check for kinked hoses. Check the inlet screens on the fill hoses. If you use a Flood Safety Device, then please remove the device and connect the water hoses directly to the unit. |
| Check if the hot water supply hose is connected. | You must connect the hot water supply hose because hot water is supplied by the Auto Temperature Control (A.T.C.) function if the temperature of the cold water is lower than 59°F. | |
| nF1 | The hot/cold water hose connection is not correct. | Please connect the hot/cold water hose connection correctly. |
| Sr | Problem with control. | Call for service. |
troubleshooting and information codes
| CODE SYMBOL | MEANING | SOLUTION |
| OE | A fault is detected in the water level sensor. | Call for service |
| E2 | Jammed key. | Call for service |
| tE | Temperature sensor problem. | Restart the cycle.If the code reappears, call for service. |
| 3E | Motor problem. | Restart the cycle.If the code reappears, call for service. |
| 2E | High/Low voltage detected. | Restart the cycle.If the code reappears, call for service. |
| 7E | Ag+ Kit problem | Call for service |
| AE | Communication error between SUB PBA and MAIN PBA | Call for service |
| SF1SF2SF3 | System error | Call for service |
| SUdS | Too many suds are detected during the washing session.The unit is put on hold until the suds are reduced. Then, the unit will go back to the operation.When it finishes washing, “End” and “SUdS” codes will blink in turn. | To prevent it, cut down on detergents. |
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG)
appendix
FABRIC CARE CHART
The following symbols provide garment care direction. The clothing care labels include symbols for washing, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to maximize garment life and reduce laundering problems.
| Wash Cycle | Special Instructions | Warning Symbols for Laundering | |||
 | Normal | [W4Y6] | Line Dry/ Hang to Dry |  | Do Not Wash |
 | Permanent Press / Wrinkle Resistant / Wrinkle Control |  | Drip Dry |  | Do Not Wring |
| [220D] | Gentle/Delicates |  | Dry Flat |  | Do Not Bleach |
 | Hand Wash | H  |  | Do Not Tumble Dry | |
 |  | High | [K4XX] | No Steam (added to iron) | |
 | Hot |  | Medium | [WZW0] | Do Not Iron |
| ●● | Warm | [20XZ] | Low |  | |
| ● | Cold | [23CX] | Any Heat |  | Dry Clean |
| Bleach |  | No Heat/Air | [57ZS] | Do Not Dry Clean | |
 | Any Bleach (when needed) | II  |  | Line Dry/ Hang to Dry | |
 | Only Non-Chlorine (color-safe) Bleach (when needed) |  | High | [W000] | Drip Dry |
 | Tumble Dry Cycle |  | Medium |  | Dry Flat |
| Normal |  | Low |  | For machine-washable wool. Loads should be under 8 pounds. | |
 | Permanent Press/ Wrinkle Resistant/ Wrinkle Control | ||||
 | Gentle/ Delicates | ||||
** The dot symbols represent appropriate wash water temperatures for various items. The temperature range for Hot is 105-125 °F(41-52 °C), for Warm 85-105 °F(29-41 °C) and for Cold 60-85 °F(16-29 °C). (Wash water temperature must be a minimum of 60 °F(16 °C) for detergent activation and effective cleaning.) The clothes washer may not ensure these temperatures because the actual water temperatures entering your washer are dependent on water heater settings and regional water supply temperatures. For example, cold water entering the home in the northern states during winter may be 40 °F(4 °C) which is too cold for effective cleaning. The water temperature in this situation will need to be adjusted by selecting a warm setting, adding some hot water to the MAX FILL line or using your washer's heating option, if available.
appendix
HELPING THE ENVIRONMENT
- Your washer is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance.
- Do not exceed the detergent quantities recommended in the detergent manufacturers' instructions.
- Use stain removal products and bleaches before the wash cycle only when necessary.
- Save water and electricity by only washing full loads (the exact amount depends upon the program used).
DECLARATION OF CONFORMITY
This appliance complies with UL2157.
SPECIFICATION
| TYPE | FRONT LOADING WASHER | ||
| DIMENSIONS | Div | In. (cm) | |
| A. Height-Overall | 38.6(98.1) | ||
| B. Width | 27(68.6) | ||
| C. Depth with door open 90° | 51.7(131.4) | ||
| D. Depth | 31.3(79.4) | ||
 | |||
| WATER PRESSURE | 20-116 psi(137-800 kPa) | ||
| WEIGHT | 190 lbs (86 kg) | ||
| HEATER RATING | 900 W | ||
| POWER CONSUMPTION | Washing | 120 V | 250 W |
| Washing and heating | 120 V | 1100 W | |
| Spinning | 120 V | 600 W | |
| Draining | 120 V | 80 W | |
| SPIN REVOLUTION | WF350* / WF340* / WF331* / WF330* | 1150 rpm | |
CYCLE CHART
Use this chart to set the best cycle and option for you laundry.
(●: factory setting, ●: selectable)
WF350* / WF340* / WF331* / WF330*
| Functions | |||||||||||
| Temp | Spin | Soil Level | |||||||||
| H/C | W/W | W/C | C/C | H | M | L | NS | H | N | L | |
| Normal | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
| Heavy Duty | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
| Perm Press | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
| Sanitize | ● | ● | ● | ● | ● | ● | ● | ● | |||
| Bedding | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||
| Deep Steam | ● | ● | ● | ● | ● | ● | |||||
| Delicates | ● | ● | ● | ● | ● | ● | ● | ● | |||
| Hand Wash | ● | ● | ● | ● | ● | ● | ● | ● | |||
| Wool | ● | ● | ● | ● | ● | ||||||
| Quick Wash | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
| Rinse + Spin | ● | ● | ● | ● | ● | ||||||
| Options | Display Time | |||||||
| Pre Wash | Steam (WF350*/ WF331*) | Extra Rinse (WF330*) | Pure Cycle | Delay Start | Garment+ | Child Lock | ||
| Normal | ● | ● | ● | ● | ● | ● | ● | 58 |
| Heavy Duty | ● | ● | ● | ● | ● | ● | ● | 104 |
| Perm Press | ● | ● | ● | ● | ● | ● | ● | 52 |
| Sanitize | ● | ● | ● | ● | ● | ● | ● | 117 |
| Bedding | ● | ● | ● | ● | ● | ● | ● | 76 |
| Deep Steam | ● | ● | ● | ● | ● | ● | ● | 109 |
| Delicates | ● | ● | ● | ● | ● | 45 | ||
| Hand Wash | ● | ● | ● | ● | ● | 45 | ||
| Wool | ● | ● | ● | ● | 60 | |||
| Quick Wash | ● | ● | ● | ● | ● | 25 | ||
| Rinse + Spin | ● | ● | ● | 19 | ||||
| Temp | Spin | Soil Level |
| H/C: Hot/ColdW/W: Warm/WarmW/C: Warm/ColdC/C: Cold/Cold | H: HighM: MediumL: LowNS: No Spin | H: HeavyN: NormalL: Light |
warranty (U.S.A)
SAMSUNG WASHER
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) year part and labor, Two (2) years Control Board Parts, Three (3) years stainless tub part, Ten (10) years washing motor part
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the contiguous United States. In-home service is not available in all areas.
To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center.
SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal and reinstallation; problems caused by pest infestations. This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS OR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE.
NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE, OR INJURY TO PURCHASER AND PURCHASER'S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state.
To obtain warranty service, please contact SAMSUNG at:
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660
1-800-SAMSUNG(726-7864)
www.samsung.com
warranty(CANADA)
SAMSUNG WASHER
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) year part and labor, Ten (10) years washing motor part
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the Canada. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the Canada. In-home service is not available in all areas.
To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center.
SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal and reinstallation; problems caused by pest infestations. This limited warranty does not cover problems resulting from incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of a service call for instructions, or fixing installation errors. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
EXCEPT AS SET FORTH HEREIN, THERE ARE NO WARRANTIES ON THIS PRODUCT EITHER EXPRESS OR IMPLIED, AND SAMSUNG DISCLAIMS ALL WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE.
NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE, OR INJURY TO PURCHASER AND PURCHASER'S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from province to province.
To obtain warranty service, please contact SAMSUNG at:
Samsung Electronics Canada Inc.,
Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada 1-800-SAMSUNG(726-7864)
www.samsung.com
SAMSUNG
Scan the QR code* or visit
www.samsung.com/spsn
to view our helpful
How-to Videos and Live Shows
*Requires reader to be installed on your smartphone
Scan this with your smartphone
QUESTIONS OR COMMENTS?
| Country | CALL | OR VISIT US ONLINE AT |
| U.S.A | 1-800-SAMSUNG(726-7864) | www.samsung.com |
| MEXICO | 01-800-SAMSUNG(726-7864) | www.samsung.com |
| CANADA | 1-800-SAMSUNG (726-7864) | www.samsung.com |
Code No. DC68-02833D-01_EN
WF350AN*
WF340AN*
WF331AN*
WF330AN*
Lave-linge
natural_image
Line drawing of a washing machine with control panel and door (no text or symbols)
natural_image
Line drawing of two front-loading washing machines (no text or symbols)
ÉTAPE 3
natural_image
Illustration of a white plug inserted into two separate electrical outlets connected by a cable (no text or symbols)natural_image
Illustration of a hand using a tool to adjust a mechanical component with an arrow indicating rotation (no text or symbols present)natural_image
Symbol of a disassembled mechanical component with a diagonal line and circular hole, no text or labels present.
natural_image
Simple line drawing of a mechanical device inside a circle, no text or symbols presenteffectuer un lavage
CHARGEMENT DU LAVE-LINGE
WF350*, WF331*
Steam Cycles
flowchart
graph TD
A["Power"] --> B["Start/Pause"]
B --> C["7"]
B --> D["8"]
B --> E["9"]
WF340*, WF330*
natural_image
Abstract logo design with stylized 'he' letters inside an oval frame (no text or symbols)
natural_image
Line drawing of hands installing or adjusting a device into a computer case (no text or symbols)
DÉCLARATION DE CONFORMITÉ
WF350* / WF340* / WF331* / WF330*
| Fonctions | |||||||||||
| Température | Essorage | Souillure | |||||||||
| C/F | T/T | T/F | F/F | E | M | F | SE | E | N | F | |
| Normal | |||||||||||
| Grand rendement | |||||||||||
| Perm Press | |||||||||||
| Stérilisation | |||||||||||
| Couette | |||||||||||
| Vapeur intensive | |||||||||||
| Délicat | |||||||||||
| Lavage main | |||||||||||
| Laine | |||||||||||
| Lavage rapide | |||||||||||
| Rinçage + Essorage | |||||||||||
| Options | Durée | |||||||
| Prélavage | Vapeur (WF350*) | Extra rinçage (WF340*/WF330*) | Pure Cycle | Départ différé | Ajout de vêtements | Sécurité enfant | ||
| Normal | ● | ● | ● | ● | ● | ● | ● | 58 |
| Grand rendement | ● | ● | ● | ● | ● | ● | ● | 104 |
| Perm Press | ● | ● | ● | ● | ● | ● | ● | 52 |
| Stérilisation | ● | ● | ● | ● | ● | ● | ● | 117 |
| Couette | ● | ● | ● | ● | ● | ● | ● | 76 |
| Vapeur intensive | ● | ● | ● | ● | ● | ● | ● | 109 |
| Délicat | ● | ● | ● | ● | ● | 45 | ||
| Lavage main | ● | ● | ● | ● | ● | 45 | ||
| Laine | ● | ● | ● | ● | 60 | |||
| Lavage rapide | ● | ● | ● | ● | ● | 25 | ||
| Rinçage + Essorage | ● | ● | ● | 19 | ||||
85 Challenger Road Ridgefield Park, NJ 07660
www.samsung.com
garantie (CANADA)
LAVE-LINGE SAMSUNG
natural_image
Line drawing of a washing machine with control panel and door (no text or symbols)
natural_image
Line drawing of two stacked washing machines with front and back views (no text or symbols)
PASO 3
natural_image
Illustration of a plug inserted into an electrical outlet (no text or symbols)
natural_image
Illustration of a hand using a tool to adjust a mechanical component with an arrow indicating rotation (no text or symbols present)natural_image
Prohibition symbol showing a crossed-out screw with a diagonal line, no text or numbers present
natural_image
Simple diagram showing a mechanical device inside a circle, no text or symbols presentWF350*, WF331*
Steam Cycles
WF340*, WF330*
1 Ciclo Selector
natural_image
Abstract logo design with stylized 'he' letters inside an oval frame (no text or symbols)
natural_image
Line drawing of a hand inserting a component into a device (no text or symbols)
natural_image
Illustration of hands using a tool to adjust or install a mechanical component (no text or symbols visible)
natural_image
Illustration of a mechanical device with a magnified view of its internal components (no text or symbols)
WF350* / WF340* / WF331* / WF330*
| Funciones | |||||||||||
| Temperatura | Centrifugado | Nivel suciedad | |||||||||
| H/C | W/W | W/C | C/C | H | M | L | NS | H | N | L | |
| Normal | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |
| Heavy Duty(Servicio pesado) | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● ) | ● |
| Perm Press(Plancha permanente) | ● | ● | ● | ● | ● | ● | ● | ● | ● ) | ● | |
| Sanitize(Desinfección) | ● | ● | ● | ● | ● | ● | ● | ● | |||
| Bedding(Ropa de cama) | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||
| Deep Steam(Vaporización profunda) | ● | ● | ● | ● | ● | ● | |||||
| Delicates(Ropa delicada) | ● | ● | ● | ● | ● | ● | ● | ● | |||
| Hand Wash(Lavado a mano) | ● | ● | ● | ● | ● | ● | ● | ● | |||
| Wool (Lana) | ● | ● | ● | ● | ● | ||||||
| Quick Wash(Lavado rápido) | ● | ● | ● | ● | ● | ● | ● | ● | ● ● | ● | ● ● |
| Rinse + Spin(Enjuague+Centrifugado) | ● | ● | ● | ● | ● | ||||||
| Opciones | Tiempo de presentación | |||||||
| Prelavado | Vapor (WF350*/ WF331*) | Enjuague extra (WF330*) | Pure Cycle | Inicio Retardado | Más prendas | Seguro para niños | ||
| Normal | ● | ● | ● | ● | ● | ● | ● | 58 |
| Heavy Duty (Servicio pesado) | ● | ● | ● | ● | ● | ● | ● | 104 |
| Perm Press (Plancha permanente) | ● | ● | ● | ● | ● | ● | ● | 52 |
| Sanitize (Desinfección) | ● | ● | ● | ● | ● | ● | ● | 117 |
| Bedding (Ropa de cama) | ● | ● | ● | ● | ● | ● | ● | 76 |
| Deep Steam (Vaporización profunda) | ● | ● | ● | ● | ● | ● | ● | 109 |
| Delicates (Ropa delicada) | ● | ● | ● | ● | ● | 45 | ||
| Hand Wash (Lavado a mano) | ● | ● | ● | ● | ● | 45 | ||
| Wool (Lana) | ● | ● | ● | ● | 60 | |||
| Quick Wash (Lavado rápido) | ● | ● | ● | ● | ● | 25 | ||
| Rinse + Spin (Enjuague+Centrifugado) | ● | ● | ● | 19 | ||||
85 Challenger Road Ridgefield Park, NJ 07660
1-800-SAMSUNG(726-7864)
www.samsung.com