CDI 1D36-02 - Dishwasher CANDY - Free user manual and instructions

Find the device manual for free CDI 1D36-02 CANDY in PDF.

CANDY CDI 1D36-02 - Dishwasher
📄 124 pages English EN Download 💬 AI Question 11 questions ⚙️ Specs
Notice CANDY CDI 1D36-02 - page 13
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Dishwasher
Brand Candy
Model CDI 1D36-02
Dimensions (W x H x D) 59.8 x 81.8-89.8 x 55 cm
Depth with door open 117 cm
Place settings 13
Wash programs Hygiene, Universal, Daily, Eco, Delicate, Quick 59', Quick 24', Night, Rinse, Clean
Options Delayed start (1-23h), Express, All in 1
Energy consumption (Eco cycle) 1.01 kWh
Water consumption (Eco cycle) 10 L
Water supply pressure 0.08 - 0.8 MPa
Electrical supply See rating plate (220-240 V, 50 Hz typical)
Safety feature Anti-flood device
Water softener Yes, adjustable from d0 to d7
Noise level Not specified
Display Yes, duration and error codes
End of cycle signal Yes, can be deactivated
Last program memory Yes, can be activated
Filter maintenance Regular cleaning recommended
Repairability Error codes E2 to Ef; contact customer service

Frequently Asked Questions - CDI 1D36-02 CANDY

How to start a wash program?
Open the door, load the dishes, press ON/OFF for 2 seconds. Select the program using the PROGRAMS button, then the desired options. Press START and close the door.
How to cancel or change a program in progress?
Open the door, press and hold the RESET button for at least 3 seconds until '00' appears. The program is canceled. You can then choose a new program.
What does the 'SL' indicator on the display mean?
The 'SL' display indicates a lack of regenerating salt in the water softener. Refill the salt reservoir.
How to adjust the water softener?
Turn off the appliance, press and hold the PROGRAMS button while turning on with ON/OFF. Release after 5 seconds; the display shows the current level (e.g. d4). Press PROGRAMS repeatedly to change the level (from d0 to d7). Turn off to confirm.
How to deactivate the end-of-cycle beep?
Turn off the dishwasher. Press and hold PROGRAMS and turn on with ON/OFF. Keep PROGRAMS pressed for 15 seconds until two beeps. Release: 'b1' = activated, 'b0' = deactivated. Press PROGRAMS to toggle, then turn off.
What to do if error code E2 appears?
E2 means water shortage. Check that the water tap is open. Turn off the dishwasher, open the tap, then restart a cycle.
How to use the 'All in 1' option?
Press the ALL IN 1 button before starting a program. This option optimizes the cycle for combined detergents (3-in-1, 4-in-1, etc.) and deactivates the salt low alarm.
Can dishes be added after starting?
Yes, open the door: the cycle stops and the display flashes. Add the dishes, close the door: the cycle automatically resumes where it stopped.
How to clean the filters?
Remove the lower basket, unscrew the cylindrical filter, clean it under running water, as well as the flat filter plate. Reassemble. Regular cleaning is recommended to prevent odors and blockages.
What is the consumption of the Eco program?
The Eco program consumes approximately 1.01 kWh of electricity and 10 liters of water, according to EN 50242. It is the most energy-efficient program for normally soiled dishes.

User questions about CDI 1D36-02 CANDY

1 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

Does the dishwasher door not open automatically at the end of the wash cycle, is this normal?
Frequently Asked Questions - 8 d
Response Notice-Facile

Yes, this is normal. The Candy CDI 1D36-02 model is not equipped with an automatic door opening function. Manually opening the door at the end of the cycle is the operation intended by the manufacturer.

At the end of the program, you will hear:

  • A 5-second beep
  • This beep repeats 3 times every 30 seconds
  • Then, the dishwasher automatically turns off

The manual recommends slightly opening the door at the end of the cycle to promote the natural drying of glasses and plates. This is a manual operation that you need to perform once the beep is heard.

Respond (be the first)

Download the instructions for your Dishwasher in PDF format for free! Find your manual CDI 1D36-02 - CANDY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CDI 1D36-02 by CANDY.

USER MANUAL CDI 1D36-02 CANDY

Thank you for choosing a Candy appliance; quality dishwashers which guarantee high performance and reliability.

Candy manufacture a vast range of domestic appliances: washing machines, washer/dryers, cookers, microwave ovens, ovens and hobs, refrigerators and freezers.

Ask your dealer for the catalogue with the complete range of Candy products. Please read this booklet carefully as it provides important information regarding the safe installation, use, and maintenance of the machine, together with some useful advice on how to achieve the best results from your dishwasher.

For future reference please keep this instruction booklet in a safe place.

CUSTOMER SERVICE AND GUARANTEE

Your new appliance is fully guaranteed by the manufacturer for 12 months against electrical/mechanical breakdown excluding:

A. Any faults which occur due to bad installation or misuse of the machine. B. Any faults which occur due to repair of, or interference with, the machine by any person not authorised by the manufacturer to carry out service. C. Any faults which occur due to any parts which are fitted to the machine which are not the original manufacturers parts. D. Any faults arising from non-domestic use or unusual or abnormal use of the machine. E. Any faults arising from operation at incorrect voltage. F. Any faults arising from incorrect operation of the machine. The guarantee applies to Gt Britain and Northern Ireland only, and is an addition to your statutory rights.

AFTER SALES SERVICE

For service and repairs call your local engineer on our national telephone number:

GIAS Service

Tel: 08444 995599

Support Service

(Eire 0818 200021)

DESCRIPTION OF THE CONTROL PANELCANDY CDI 1D36-02 - AFTER SALES SERVICE - 1

A "ON/OFF" button B "PROGRAMME SELECTION" button C "DELAY START" button D "EXPRESS" option button E "ALL IN 1" option button

F "START"/"RESET" button (start/cancelling programme) G "OPTION SELECTION" lights H DIGITAL DISPLAY Programme guide

DIMENSIONS
Width x Height x Depth (cm)59,8 x 81,8 ÷ 89,8 x 55
Depth with door open (cm)117
TECHNICAL DATA
EN 50242 place load13
Capacity with pans and dishes8 persons
Water supply pressure (MPa)Min. 0,08 - Max. 0,8
Fuse / Power input / Supply voltageSee rating plate
CONSUMPTION (main programmes)*
ProgrammeEnergy (kWh)Water (L)
HYGIENIC2,0019,5
UNIVERSAL1,4413,5
ECO1,0110
RAPID 24'0,599
Power consumption of the off-mode and of the left-on mode: 0,45 W / 0,45 W
*Values are measured in a laboratory according to European Standard EN 50242 (consumption may vary according to conditions of usage).

PROGRAMME SELECTION AND SPECIAL FUNCTIONS

(Use in conjunction with programme guide)

Programme settings

  • Open the door and place the dirty dishes inside the appliance. Press the "ON/OFF" button for about 2 seconds. The display will show two lines. Choose a programme by pressing the "PROGRAMME SELECTION" button. If you wish to select an option, press the corresponding button (the indicator light will turn on).

The option buttons can be selected or deselected WITHIN one minute of the programme commencing.

Press the "START" button.

The length of the program will be shown on the display alternating hours with minutes [e.g., 1h (1 hour) / 25 (25 minutes)].

  • Close the door (after an audible signal has sounded, the programme will start automatically).

WITHIN one minute of the programme commencing, another programme can be selected, simply by pressing the "PROGRAMME SELECTION" button.

"IMPULSE" programmes

The "IMPULSE" programmes use an impulse washing technology, which reduces consumption, noise and increases performances.

IMPORTANT

The "intermittent" working of the washing pump MUST NOT BE considered a malfunction; it is a characteristic of the impulse washing, so it must be considered a normal function of the programme.

Programme interruption

Opening the door when a programme is running is not recommended, especially during the main wash and final hot rinse phases. However, if the door is opened while a programme is running (for example, to add dishes), the machine stops automatically and the display will flash the remaining time before the end of the cycle. Close the door without pressing any buttons. The cycle will start from where it left off.

CANDY CDI 1D36-02 - Programme interruption - 1

WARNING!

If you open the door during the drying cycle, an audible audio signal advises you that the drying cycle has not yet finished.

Changing a running programme

Proceed as follows to change or cancel a running programme:

Open the door. Hold the "RESET" button down for at least 3 seconds. "00" will appear on the display and some audible signals will sound. The running programme will be cancelled. The display will show two lines. At this point a new programme can be set.

CANDY CDI 1D36-02 - Changing a running programme - 1

WARNING!

Before starting a new programme, you should check that there is still detergent in the dispenser. If necessary, top up the dispenser.

If there is any break in the power supply while the dishwasher is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left off.

Programme end

A 5 second alarm will sound (if not muted) 3 times at 30 second intervals to signal that the programme has ended.

The dishwasher will automatically switch off.

Option buttons

"EXPRESS" button Express

This button provides an energy and time saving of 25% on average (according to the selected cycle), reducing the wash water temperature and the drying time during the final rinse.

This programme is recommended for light soil washes, and for slightly wet dishes that are not fully dry, & improved drying results. We advise you to leave the door of the Dishwasher half-open at the end of the cycle, to allow for a natural circulation of air inside the dishwasher.

"All IN 1" button

This option optimises the use of "ALL in 1" ("3 in 1"/"4 in 1"/"5 in 1", etc.) combined detergents.

By pressing this button, the selected washing programme is modified to get best performance from combined detergents (furthermore, the salt empty alert will be de-activated).

CANDY CDI 1D36-02 - "All IN 1" button - 1

WARNING!

Once selected, this option keeps being on (light on) also for next washing cycles and it can be de-activated (light off) only by pressing the button once again.

IMPORTANT

This option is recommended when using the RAPID 24' program, the duration of which will be extended for about 15 minutes, allowing the detergent tablets to achieve a better performance.

Salt empty alert

If your dishwasher requires filling with salt, the display will show and flash "SL" when the dishwasher is switched on.

The appearance of white stains on dishes is generally a warning sign that the salt container needs filling.

"DELAY START" button

1-23h

Dishwasher start time can be set with this button, delaying start from 1 to 23 hours.

Proceed as follows to set a delayed start:

Press the "DELAY START" button ("00" will appear on the display). Press the button again to increase the delay in hours (each time the button is pressed the delay is increased by 1 hour to a maximum of 23). To start the countdown, press the "START" button.

At the end of the countdown, the programme will automatically start.

If you wish to see which programme has been selected, press the "PROGRAMME SELECTION" button.

Proceed as follows to cancel a delayed start:

Hold the "RESET" button down for at least 3 seconds. "00" will appear on the display and some audible signals will sound. The delayed start and the selected programme will be cancelled. The display will show two lines. At this point, a new programme and option buttons must be set to start a new programme as indicated in the "PROGRAMME SETTINGS" section.

Alarm mute for the PROGRAMME END

The alarm for the programme end may be muted as follows:

IMPORTANT

The dishwasher must ALWAYS be off before start of this procedure.

  1. Hold down the "PROGRAMME SELECTION" button and at the same time switch on the dishwasher by pressing the "ON/OFF" button (a brief audible signal will sound).
  2. Keep the "PROGRAMME SELECTION" button pressed for at least 15 seconds (during this time 2 audible signals will sound).
  3. Release the button when the second audible signal sounds ("b1" will appear on the display to indicate that the alarm is on).
  4. Press the same button again ("b0" will appear on the display to indicate that the alarm is off).
  5. Turn off the dishwasher by pressing the "ON/OFF" button to confirm the new setting.

To turn the alarm on again, follow the same procedure.

Memorization of the last programme used

The last programme used can be memorized by following the below:

IMPORTANT The dishwasher must ALWAYS be off before start of this procedure.

  1. Hold down the "PROGRAMME SELECTION" button and at the same time switch on the dishwasher by pressing the "ON/OFF" button (a brief audible signal will sound).
  2. Keep the "PROGRAMME SELECTION" button pressed for at least 30 seconds (during this time, 3 audible signals will sound).
  3. Release the button when the THIRD audible signal sounds ("A0" will appear on the display to indicate that the memorization is off).
  4. Press the same button again ("A1" will appear on the display to indicate that the memorization is on).
  5. Turn off the dishwasher by pressing the "ON/OFF" button to confirm the new setting.

To disable the memorization, follow the same procedure.

IMPORTANT

This dishwasher is equipped with an anti-overflow safety device which will automatically discharge any excess water should a problem occur.

CANDY CDI 1D36-02 - IMPORTANT - 1

WARNING!

To ensure the correct operation of the anti-overflow safety device, we recommend that the dishwasher is not moved or tilted during operation. If however it is necessary to tilt or move the dishwasher, please ensure that the washing cycle is complete and that there is no remaining water inside the dishwasher.

The dishwasher is able to signal a series of faults in the display.

AUTOMATIC FAULT SIGNALS

FAULTSCAUSESOLUTION
E2 appears on the display and the alarm sounds.No water (inlet hose closed).Turn off the dishwasher, open the inlet hose and reset the cycle.
E3 appears on the display and the alarm sounds.The machine cannot drain water.Check if the drain tube is bent or if the siphon or filters are clogged. If the problem persists, contact Customer Service.
E4 appears on the display and the alarm sounds.Water leakCheck if the drain tube is bent or if the siphon or filters are clogged. If the problem persists, contact Customer Service.
E5,E6,E7,Ef or EL appears on the display and the alarm sounds.Electronic control fault.Contact Customer Service.
E8 or Ei appear on the display and the alarm sounds.The water heating element is not working correctly or the filter plate is clogged.Clean the filter plate. If the problem persists, contact Customer Service.

WATER SOFTENER UNIT

Depending on the source of the supply, water contains varying amounts of limestone and minerals which are deposited on the dishes leaving whitish stains and marks. The higher the level of these minerals present in the water, the harder the water is. The dishwasher is fitted with a water softener unit which, through the use of special regenerating salt, supplies softened water for washing the dishes. The degree of hardness of your water can be obtained from your water supply company.

Regulating the water softener with electronic programmer

The water softener can treat water with a hardness level of up to 90°fH (French grading) or 50°dH (German grading) through 8 settings.

The settings are listed in the table below:

LevelWater hardnessUse of regenerating saltWater softer setting
°fH (French)°dH (German)
00-50-3NOd0
16-104-6YESd1
211-207-11YESd2
321-3012-16YESd3
*431-4017-22YESd4
541-5023-27YESd5
651-6028-33YESd6
761-9034-50YESd7
  • The softener unit is set in the factory at level 4 (d4) as this satisfies the requirements of the majority of users.

Regulate the setting of your water softener unit according to the degree of hardness of your water as follows:

IMPORTANT

The dishwasher must ALWAYS be off before start of this procedure.

  1. Hold down the "PROGRAMME SELECTION" button and at the same time switch on the dishwasher by pressing the "ON/OFF" button (a brief audible signal will sound).
  2. Keep the "PROGRAMME SELECTION" button pressed for at least 5 seconds, UNTIL an audible signal sounds. The current water softener setting level will be shown on the display.
  3. Press the same button again to select the required water softener level: each time the button is pressed, the setting will increase by one level. When you have reached "d7", the display will go back to "d0".
  4. Turn off the dishwasher by pressing the "ON/OFF" button to confirm the new setting.

CANDY CDI 1D36-02 - IMPORTANT - 1

WARNING!

If any problem occurs, turn the dishwasher off by pressing the "ON/OFF" button and start the procedure again from the beginning (STEP 1).

CANDY CDI 1D36-02 - WARNING! - 1

PROGRAMME GUIDE

Wash with prewash

For wash programmes with prewash, it is advisable to add a second dose of detergent (max. 10 g) directly in the machine.

ProgrammeDescription
P 1\( \overleftarrow{\mathbb{O}} \)Hygienic \( {75}^{ \circ }\mathrm{C} \)An antibacterial cycle, intended for washing and sterilising dishes (even heavily stained ones) babies' bottles etc.
P 2\( \overleftarrow{\mathbb{U}} \)Universal \( {60}^{ \circ }\mathrm{C} \)Once a day - for normal soiled pans and any other items that have been left all day for washing.
P 3\( ≈ \)Daily \( {55}^{ \circ }\mathrm{C} \)Fast cycle, for "normally" dirty dishes - intended for frequent washes and normal loads.
P 4\( \widetilde{\mathbf{{ECO}}} \)Eco \( {45}^{ \circ }\mathrm{C} \)Programme for normally soiled tableware (the most efficient in terms of its combined energy and water consumption for that type of tableware). Programme standardised to EN 50242.
P 5\( \widetilde{\mathbf{O}} \)Delicate \( {45}^{ \circ }\mathrm{C} \)Suitable for delicate crockery and glassware. Also for less soiled items excluding pans.
P 6\( \widetilde{\mathbf{R}}^{59} \)Rapid 59' \( {65}^{ \circ }\mathrm{C} \)Suitable for heavily soiled items that are to be washed straight after a meal (Max 8 place load).
P 7\( \widetilde{\mathbf{R}}^{24} \)Rapid 24' \( {50}^{ \circ }\mathrm{C} \)Quick wash for dishes which are to be washed immediately after the meal. Wash load of 6 persons.
P 8\( \widetilde{\mathbf{O}} \)Night \( {55}^{ \circ }\mathrm{C} \)Quietest washing cycle. Ideal for functioning by night and for taking advantage of reduced energy fares.
P 9\( \widetilde{\mathbf{O}} \)RefreshShort cold pre-wash for items that are stored in the dishwasher until you are ready to wash a full load.
\( {70}^{ \circ }\mathrm{C} \)Dishwasher Cleaner \( P4 + Express= \)This programme should be used periodically with specialist dishwasher cleaning products. For all cleaning operations the dishwasher must be empty.

■ = "IMPULSE" programmes N/A = OPTION NOT AVAILABLE

Check listProgramme contentsAveragedurationin minutesSpecial functionbuttonsavailable
Detergent for soaking(Prewash)Detergent for washingClean filterCheck rinse aiddispenserCheck salt container
Hot pre-washCold pre-washMain washFirst cold rinseSecond cold rinseHot rinse with rinse aidWith cold water (15°C)*-Tolerance ± 10%-"DELAY START" button"EXPRESS" button"ALL IN 1" button
75°C130YESYESYES
60°C120YESYESYES
55°C80YESYESYES
45°C190YESYESYES
45°C85YESYESYES
65°C59YESYESYES
50°C24YESN/AYES
55°C240YESYESYES
5YESN/A
70°C45YES
  • WITH HOT WATER THE TIME REMAINING UNTIL THE END OF THE PROGRAMME IS AUTOMATICALLY DISPLAYED WHILE THE PROGRAMME IS RUNNING.

Programmes "IMPULSE"

Delayed start button 1-23h

ProgrammeDescription

■ = "IMPULSE" programmes N/A = OPTION NOT AVAILABLE

75°C130OUIOUIOUI
60°C120OUIOUIOUI
55°C80OUIOUIOUI
45°C190OUIOUIOUI
45°C85OUIOUIOUI
65°C59OUIOUIOUI
50°C24OUIN/AOUI
55°C240OUIOUIOUI
5OUIN/A
70°C45OUI
  • WITH HOT WATER, THE TIME REMAINING BEFORE THE END OF THE WASH PROGRAM IS AUTOMATICALLY DISPLAYED DURING THE CYCLE.

WATER SOFTENER

■ = "IMPULSE" programs N.V. = OPTION NOT AVAILABLE

75°C130JAJAJA
60°C120JAJAJA
55°C80JAJAJA
45°C190JAJAJA
45°C85JAJAJA
65°C59JAJAJA
50°C24JAN.V.JA
55°C240JAJAJA
5JAN.V.
70°C45JA

■ = "IMPULSE" programs N/A = OPTION NOT AVAILABLE

■ = "IMPULSE" programs N/A = OPTION NOT AVAILABLE

75°C130JAJAJA
60°C120JAJAJA
55°C80JAJAJA
45°C190JAJAJA
45°C85JAJAJA
65°C59JAJAJA
50°C24JAN/AJA
55°C240JAJAJA
5JAN/A
70°C45JA
  • WHEN THE MACHINE USES HOT WATER DURING A PROGRAM, THE DISPLAY AUTOMATICALLY SHOWS HOW MANY MINUTES ARE LEFT UNTIL THE END OF THE PROGRAM.

WATER SOFTENING SYSTEM

75°C130DADADA
60°C120DADADA
55°C80DADADA
45°C190DADADA
45°C85DADADA
65°C59DADADA
50°C24DAN/ODA
55°C240DADADA
5DAN/O
70°C45DA
  • THE TIME REMAINING UNTIL THE END OF THE CURRENT PROGRAM IS AUTOMATICALLY DISPLAYED WHILE THE PROGRAM IS RUNNING.

Congratulations!

Thank you for choosing a Candy household appliance; a quality dishwasher that guarantees high performance and reliability.

Candy produces a very wide range of household appliances: washing machines, washer-dryers, cookers, microwave ovens, built-in ovens and hobs, refrigerators and freezers. Ask your dealer for the latest and complete Candy product catalog.

Please read the instructions in this booklet carefully. They will provide you with important information not only for the safe installation, use, and maintenance of the dishwasher, but also on how to achieve the best results in everyday use of the dishwasher.

■ = "IMPULSE" programs N/A = NOT AVAILABLE

Popis provjeraSadržaj programaProsječno trajanje u min.Tipke sa posebnim funkcjijaTipke "ALL IN 1"
Detdent zanamakanjeDetdent zan pranjeČišćanje filtràProvjera sredstva za sjajProvjera koliçine soliVrucije predpranjeHladno predpranjeGlavno pranjePrvo hladno pranjeDrugo hladno pranjeVrucije ispiranje sa sredstvom za sjsjSa hladnom vodom (15°C)* - Dopusteno odstupanje ± 10% -Tipka "ODGODU POCETKA PRANJA"Tipka "EXPRESS"Tipka "ALL IN 1"
75°C130DADADA
60°C120DADADA
55°C80DADADA
45°C190DADADA
45°C85DADADA
65°C59DADADA
50°C24DAN/ADA
55°C240DADADA
5DAN/ADA
70°C45DA

★ WITH HOT WATER PROGRAMS, THE REMAINING TIME UNTIL THE END OF THE PROGRAM WILL AUTOMATICALLY BE SHOWN BRIEFLY WHEN THE PROGRAM STARTS.

WATER SOFTENING DEVICE

If the following occurs:

Open the door. Press the "RESET" button for 3 seconds. The "00" indication will appear and you will hear a beep. The program that the dishwasher is running will be cancelled. When the indication disappears, you can select a new program.

!CAUTION!

Before using the new program, ensure that the appliance is disconnected from the power supply. If not, disconnect it.

If a disk error occurs while a program is running, special software will stop the selected program and when the power supply is restored, the appliance will resume the program from the point where it was when the disk error occurred.

End of program

A double beep (if not muted) will sound 3 times at 30-second intervals to alert you that the program has finished. The appliance will switch off automatically.

Optional keys

75°C130NAINAINAI
60°C120NAINAINAI
55°C80NAINAINAI
45°C190NAINAINAI
45°C85NAINAINAI
65°C59NAINAINAI
50°C24NAI△/ΘNAI
55°C240NAINAINAI
5NAI△/Θ
70°C45NAI

"IMPULSE" programs

"DELAYED START" button

CANDY CDI 1D36-02 - "DELAYED START" button - 1

1-23h

■ = "IMPULSE" programs N/A = OPTION NOT AVAILABLE

■ = "IMPULSE" programs N/A = FUNCTION NOT AVAILABLE

75°C130TAKTAKTAK
60°C120TAKTAKTAK
55°C80TAKTAKTAK
45°C190TAKTAKTAK
45°C85TAKTAKTAK
65°C59TAKTAKTAK
50°C24TAKN.D.TAK
55°C240TAKTAKTAK
5TAKN.D.
70°C45TAK
  • WHEN WASHING IN HOT WATER, THE TIME REMAINING TO THE END OF THE PROGRAM ADJUSTS AUTOMATICALLY DURING THE PROGRAM.

WATER SOFTENER REGULATION

The manufacturer declines all responsibility in the event of any printing mistakes in this booklet. The manufacturer also reserves the right to make appropriate modifications to its products without changing the essential characteristics.

To consult the product fiche, please refer to the manufacturer website.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : CANDY

Model : CDI 1D36-02

Category : Dishwasher