KIS62449 - KIS62449 - Built-in refrigerator ELECTROLUX - Free user manual and instructions

USER MANUAL KIS62449 - KIS62449 ELECTROLUX

Get the most out of your appliance For quick access to manuals, how-to guides, support and more through our photo registration visit electrolux.com/register

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Welcome to Electrolux. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www.electrolux.com/webselfservice Register your product for better service: www.registerelectrolux.com Buy Accessories, Consumables and Original spare parts for your appliance: www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice.

SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the ENGLISH

instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept away from the appliance unless continuously supervised. Do not let children play with the appliance. Keep all packaging away from children and dispose of it appropriately. Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts may become hot during use. If the appliance has a child safety device, it should be activated. Children shall not carry out cleaning and user maintenance of the appliance without supervision.

1.2 General Safety

WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid touching heating elements.

WARNING: Unattended cooking on a hob with fat or

oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.

CAUTION: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility. CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously.

WARNING: Danger of fire: Do not store items on the

cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use the appliance before installing it in the built-in structure. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector. If the glass ceramic surface / glass surface is cracked, switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply. In either case contact the Authorised Service Centre. If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard.

WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents. ENGLISH

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING! Only a qualified person must install this appliance. WARNING! Risk of injury or damage to the appliance.

Remove all the packaging. Do not install or use a damaged appliance. Follow the installation instructions supplied with the appliance. Keep the minimum distance from other appliances and units. Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. Seal the cut surfaces with a sealant to prevent moisture to cause swelling. Protect the bottom of the appliance from steam and moisture. Do not install the appliance adjacent to a door or under a window. This prevents hot cookware falling from the appliance when the door or the window is opened. Each appliance has cooling fans on the bottom. If the appliance is installed above a drawer: – Do not store any small pieces or sheets of paper that could be pulled in, as they can damage the cooling fans or impair the cooling system. – Keep a distance of minimum 2 cm between the bottom of the appliance and parts stored in the drawer. Remove any separator panels installed in the cabinet below the appliance.

2.2 Electrical Connection

WARNING! Risk of fire and electric shock.

All electrical connections should be made by a qualified electrician.

The appliance must be earthed. Before carrying out any operation make sure that the appliance is disconnected from the power supply. Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot. Use the correct electricity mains cable. Do not let the electricity mains cable tangle. Make sure that a shock protection is installed. Use the strain relief clamp on the cable. Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable. The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools. Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. If the mains socket is loose, do not connect the mains plug. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. The electrical installation must have an isolation device which lets you

www.electrolux.com disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

2.3 Use

WARNING! Risk of injury, burns and electric shock.

Remove all the packaging, labelling and protective film (if applicable) before first use. This appliance is for household use only. Do not change the specification of this appliance. Make sure that the ventilation openings are not blocked. Do not let the appliance stay unattended during operation. Set the cooking zone to “off” after each use. Do not rely on the pan detector. Do not put cutlery or saucepan lids on the cooking zones. They can become hot. Do not operate the appliance with wet hands or when it has contact with water. Do not use the appliance as a work surface or as a storage surface. If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock. Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation. When you place food into hot oil, it may splash. WARNING! Risk of fire and explosion

Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them. The vapours that very hot oil releases can cause spontaneous combustion. Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. WARNING! Risk of damage to the appliance.

Do not keep hot cookware on the control panel. Do not put a hot pan cover on the glass surface of the hob. Do not let cookware boil dry. Be careful not to let objects or cookware fall on the appliance. The surface can be damaged. Do not activate the cooking zones with empty cookware or without cookware. Do not put aluminium foil on the appliance. Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface. This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

2.4 Care and cleaning

Clean the appliance regularly to prevent the deterioration of the surface material. Deactivate the appliance and let it cool down before you clean it. Disconnect the appliance from the electrical supply before maintenance. Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use any abrasive products, abrasive cleaning pads, solvents or metal objects.

2.5 Service

To repair the appliance contact the Authorised Service Centre. Use original spare parts only. ENGLISH

2.6 Disposal

WARNING! Risk of injury or suffocation.

Contact your municipal authority for information on how to discard the appliance correctly.

Disconnect the appliance from the mains supply. Cut off the mains electrical cable close to the appliance and dispose of it.

3. INSTALLATION

WARNING! Refer to Safety chapters. WARNING! All electrical connections must be made by a qualified electrician.

3.1 Before the installation

Before you install the hob, write down the information below from the rating plate. The rating plate is on the bottom of the hob. CAUTION! Do not drill or solder the wire ends. This is strictly forbidden! CAUTION! Do not connect the cable without cable end sleeve.

3.2 Built-in hobs

Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards.

3.3 Connection cable

The hob is supplied with the connection cable. Replace the damaged mains cable only with the spare parts cable. Speak to your local Authorised Service Center. Two-phase connection

1. Remove the cable end sleeve from

black and brown wires.

2. Remove an insulation of the brown

and black cable ends.

3. Apply a new wire end sleeve of 1.5

mm² on each cable end. (special tool required). Cable cross section 230V~ 400V 2~N

One-phase connection - 230 V~ Two-phase connection - 400 V 2 ~ N Green - yellow Green - yellow

Blue and blue Blue and blue

Black and brown Black

www.electrolux.com One-phase connection - 230 V~ Two-phase connection - 400 V 2 ~ N Brown

3.4 Assembly

If the appliance is installed above a drawer, the hob ventilation can warm up the items stored in the drawer during the cooking process.

4. PRODUCT DESCRIPTION

4.1 Cooking surface layout

1 Induction cooking zone 2 Control panel

For detailed information on the sizes of the cooking zones refer to "Technical data".

4.2 Control panel layout

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sen‐ sor field Function Comment

ON / OFF To activate and deactivate the hob.

Lock / Child Safety De‐ vice To lock / unlock the control panel. SenseBoil® To activate and deactivate the function. The indicators above the symbol show the progress of the function. Bridge To activate and deactivate the function.

Heat setting display To show the heat setting.

Timer indicators of cook‐ ing zones To show for which zone you set the time.

Sen‐ sor field Function Comment

Timer display To show the time in minutes. Hob²Hood To activate and deactivate the manual mode of the function.

To select the cooking zone.

To increase or decrease the time. PowerBoost To activate the function. Control bar To set a heat setting.

Description The cooking zone is deactivated. The cooking zone operates.

SenseBoil® operates. Automatic Heat Up operates. PowerBoost operates. + digit There is a malfunction.

OptiHeat Control (3 step Residual heat indicator): continue cook‐ ing / keep warm / residual heat.

Lock / Child Safety Device operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off operates. ENGLISH

4.4 OptiHeat Control (3 step

Residual heat indicator) WARNING!

There is a risk of burns from residual heat. The indicators show the level of the residual heat for the cooking zones you are currently using. The indicators may also come on for the neighbouring cooking zones even if you are not using them.

The induction cooking zones produce the heat necessary for the cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.

5. DAILY USE

WARNING! Refer to Safety chapters. Heat setting The hob deacti‐ vates after

5.1 Activating and deactivating

1-3 6 hours Touch for 1 second to activate or deactivate the hob. 4-7 5 hours 8-9 4 hours

5.2 Automatic Switch Off

10 - 14

1.5 hour

all cooking zones are deactivated, you do not set the heat setting after you activate the hob, you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again. you use incorrect cookware. The comes on and the cooking symbol zone deactivates automatically after 2 minutes. you do not deactivate a cooking zone or change the heat setting. After some time comes on and the hob deactivates. The relation between the heat setting and the time after which the hob deactivates:

5.3 The heat setting

To set or change the heat setting: Touch the control bar at the correct heat setting or move your finger along the control bar until you reach the correct heat setting.

5.4 SenseBoil®

The function automatically adjusts the temperature of water so that it does not boil over once it reaches the boiling point.

www.electrolux.com If there is any residual heat

) on the cooking zone you want to use, an acoustic signal is emitted and the function does not start.

1. Touch

2. Touch

the area marking. If the cookware is located between the two centres, Bridge function will not be activated. to activate the hob. to activate the function. appears for cooking zones A blinking on which you can presently use the function.

3. Touch the control bar of any

available cooking zone for which you want to start the function (between the heat setting 1-14). The function starts. If you do not choose any cooking zone within 5 seconds the function does not activate. Once the function starts the indicators above the symbol come on one after another until the water reaches the boiling point. When the function detects the boiling point the hob emits an acoustic signal and the heat level automatically changes to 8. If all cooking zones are already in use or there is some residual heat on all of them, the hob emits a beep sound, the indicators above blink and the function does not start. (the To deactivate the function touch function deactivates and the heat setting goes down to 0) or touch the control bar and adjust the heat setting manually.

5.5 Using the cooking zones

Place the cookware in the centre of the selected zone. Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. You can cook with large cookware placed on two cooking zones at the same time. The cookware must cover the centres of both zones but not go beyond

5.6 Bridge

The function operates when the pot covers the centres of the two zones. It does not work with the SenseBoil® function. This function connects two left side cooking zones and they operate as one. First set the heat setting for one of the left side cooking zones. To activate the function: touch . To set or change the heat setting touch one of the control sensors. To deactivate the function: touch The cooking zones operate independently.

5.7 Automatic Heat Up

Activate this function to get a desired heat setting in a shorter time. When it is on, the zone operates on the highest setting in the beginning and then continues to cook at the desired heating setting. To activate the function the cooking zone must be cold. ENGLISH To activate the function for a cooking zone: touch ( comes on). Immediately touch a desired heat setting. After 3 seconds comes on. To deactivate the function: change the heat setting. This function makes more power available to the induction cooking zones. The function can be activated for the induction cooking zone only for a limited period of time. After this time the induction cooking zone automatically sets back to the highest heat setting. Refer to “Technical data” chapter. To activate the function for a cooking zone: touch

When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates. To stop the sound: touch

5.8 PowerBoost

comes on. To deactivate the function: change the heat setting.

5.9 Timer

Count Down Timer You can use this function to set how long the cooking zone should operate for a single cooking session.

remaining time counts back to 00. The indicator of the cooking zone goes out.

CountUp Timer (The count up timer) You can use this function to monitor how long the cooking zone operates. To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on.

To activate the function: touch comes on. When the the timer. indicator of the cooking zone starts to flash slowly the time counts up. The display switches between counted time (minutes). and To see how long the cooking zone operates: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows how long the zone operates. To deactivate the function: set the cooking zone with and touch

First set the heat setting for the cooking zone then set the function. . The indicator of the cooking zone goes out. To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. Minute Minder You can use this function as a Minute Minder when the hob is activated and the cooking zones do not operate. The

To activate the function: touch the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slowly the time counts down. To see the remaining time: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time. To change the time: set the cooking zone with . Touch

To deactivate the function: set the cooking zone with and touch . The heat setting display shows

To activate the function: touch

Touch of the timer to set the time. When the time comes to an end, the sound operates and 00 flashes. To stop the sound: touch

The function has no effect on the operation of the cooking zones.

5.10 Lock

To confirm your selection wait until the hob deactivates automatically. You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting. When the function is set to hear the sounds only when: Set the heat setting first. To activate the function: touch . comes on for 4 seconds. The Timer stays on. To deactivate the function: touch . The previous heat setting comes on.

you can you touch Minute Minder comes down Count Down Timer comes down you put something on the control panel.

5.13 Power limitation

Originally the hob is at its highest possible power level. When you deactivate the hob, you also deactivate this function. To decrease or increase the power level:

5.11 Child Safety Device

This function prevents an accidental operation of the hob.

2. Touch

for 3 seconds. The display comes on and goes off. To activate the function: activate the hob with Touch . Do not set the heat setting. for 4 seconds. Deactivate the hob with comes on.

To deactivate the function: activate the hob with Touch . Do not set the heat setting. for 4 seconds. Deactivate the hob with comes on.

To override the function for only one cooking time: activate the hob with

comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you deactivate the hob with operates again. the function

5.12 OffSound Control

(Deactivating and activating the sounds) Deactivate the hob. Touch for 3 seconds. The display comes on and goes out. Touch for 3 seconds.

comes on. Touch of the timer to choose one of the following:

- the sounds are off

- the sounds are on for 3 seconds.

3. Touch

4. Touch

5. Touch

power level. Power levels of the Timer to set the Refer to “Technical data” chapter.

P 72 — 7200 W P 15 — 1500 W P 20 — 2000 W P 25 — 2500 W P 30 — 3000 W P 35 — 3500 W P 40 — 4000 W P 45 — 4500 W P 50 — 5000 W P 60 — 6000 W CAUTION! Make sure that the selected power fits the house installation fuses. WARNING! If you select one of the lowest power levels the SenseBoil® function may not work. Refer to the table below. - the function works, does not work. - the function ENGLISH Power levels Cooking zone Left front Left rear Right Right front rear

Power management function with Power limitation function When you set the Power limitation function to 6.0 kW or less, power of the hob is divided between all cooking zones. P 72 P 15 P 20 P 25 P 30 P 35 P 40 P 45 When you set the Power limitation function to more than 6.0 kW, the power of the hob is divided between its left and right side. P 50 P 60

5.14 Power management

Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration. Each phase has a maximum electricity loading of 3600 W. The function divides the power between cooking zones connected to the same phase. The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3600 W. The function decreases the power to the other cooking zones connected to the same phase. The heat setting display of the reduced zones alternates between the chosen heat setting and the reduced heat setting. After some time the heat setting display of the reduced zones stays on the reduced heat setting.

5.15 Hob²Hood

It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infrared signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually. For most of the hoods the remote system is originally deactivated. Activate it before you use the function. For more information refer to hood user manual.

www.electrolux.com Operating the function automatically To operate the function automatically set the automatic mode to H1 – H6. The hob is originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes temperature of the cookware automatically and adjusts the speed of the fan. Automatic modes Auto‐ matic light Boil‐ ing1) Frying2) Mode

Fan speed 1 Fan speed 1 Mode

Off Fan speed 1 Mode

Fan speed 1 Fan speed 1 Mode

Fan speed 1 Fan speed 2 Mode

Fan speed 2 Fan speed 3

1) The hob detects the boiling process and

activates fan speed in accordance with au‐ tomatic mode.

2) The hob detects the frying process and

activates fan speed in accordance with au‐ tomatic mode.

3) This mode activates the fan and the light

and does not rely on the temperature. Changing the automatic mode

1. Deactivate the appliance.

for 3 seconds. The display

2. Touch

comes on and goes off.

3. Touch

4. Touch

on. a few times until comes

5. Touch

of the Timer to select an automatic mode. To operate the hood directly on the hood panel deactivate the automatic mode of the function. When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from accidental activation of the fan for the next 30 seconds. Operating the fan speed manually You can also operate the function manually. To do that touch when the hob is active. This deactivates automatic operation of the function and allows you to change the fan speed manually. When you press you raise the fan speed by one. When you reach an intensive level again you will set fan speed and press to 0 which deactivates the hood fan. To start the fan again with fan speed 1 touch To activate automatic operation of the function, deactivate the hob and activate it again. Activating the light You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 – H6. The light on the hood deactivates 2 minutes after deactivating the hob. ENGLISH

6. HINTS AND TIPS

WARNING! Refer to Safety chapters.

6.1 Cookware

For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with suitable cookware. Cookware material

correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a correct marking from a manufacturer).

• not correct: aluminium, copper, brass, glass, ceramic, porcelain. Cookware is suitable for an induction hob if:

water boils very quickly on a zone set to the highest heat setting. a magnet pulls on to the bottom of the cookware. The bottom of the cookware must be as thick and flat as possible. Ensure pan bases are clean and dry before placing on the hob surface.

crack noise: cookware is made of different materials (a sandwich construction).

• whistle sound: you use a cooking zone with a high power level and the cookware is made of different materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates. The noises are normal and do not indicate any malfunction.

6.3 Hints & Tips for SenseBoil®

The function works best for boiling water and preparing potatoes. It does not work with cast iron and non-stick cookware, e.g. with a ceramic coating. Enamelled steel pots are recommended for achieving the best results while boiling potatoes. Check if the pot you chose is suitable for SenseBoil® by monitoring the first cooking session. To use SenseBoil® efficiently follow the advice below:

Cookware dimensions Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. The cooking zone efficiency is related to the diameter of the cookware. The cookware with a diameter smaller than the minimum receives only a part of the power generated by the cooking zone. Refer to "Technical data".

6.2 The noises during operation

Fill between half to three quarters of the pot with cold tap water leaving 4 cm from the rim of the pot empty. Do not use less than 1 or more than 5 litres of water. Make sure the total weight of the water (or the water and potatoes) ranges between 1-5 kg. If you want to cook potatoes, make sure they are completely covered with water, but remember to leave at least one quarter of the pot empty. To achieve the best results cook only whole, unpeeled, medium-sized potatoes. Make sure you do not pack potatoes too tightly. Avoid producing external vibrations (e.g. from using a blender or placing a mobile phone next to the appliance) when the function is running. If you want to use salt, add it after the water reaches the boiling point.

The function may not work properly for water kettles and espresso pots.

6.4 Öko Timer (Eco Timer)

To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation. is not linear. When you increase the heat setting, it is not proportional to the increase of the consumption of power. It means that a cooking zone with the medium heat setting uses less than a half of its power. The data in the table is for guidance only.

6.5 Examples of cooking

applications The correlation between the heat setting of a zone and its consumption of power Heat setting Use to: Time (min)

Keep cooked food warm. as nec‐ Put a lid on the cookware. essary 1-3 Mix from time to time. 1-3 Solidify: fluffy omelettes, baked eggs.

10 - 40

Cook with a lid on. 3-5 Simmer rice and milkbased dishes, heat up readycooked meals.

25 - 50

Add at least twice as much liquid as rice, mix milk dishes halfway through the procedure. 5-7 Steam vegetables, fish, meat.

20 - 45

Add a couple of tablespoons of liquid. 7-9 Steam potatoes.

20 - 60

Use max. ¼ l of water for 750 g of potatoes. 7-9 Cook larger quantities of food, stews and soups.

Up to 3 l of liquid plus ingre‐ dients.

9 - 12

Gentle fry: escalope, veal as nec‐ Turn halfway through. cordon bleu, cutlets, rissoles, essary sausages, liver, roux, eggs, pancakes, doughnuts.

12 - 13

Heavy fry, hash browns, loin steaks, steaks.

Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

5 - 15

Hints Turn halfway through. Boil large quantities of water. PowerBoost is activated. ENGLISH

6.6 Hints and Tips for

Hob²Hood Other remotely controlled appliances may block the signal. Do not use any such appliances near to the hob while Hob²Hood is on. When you operate the hob with the function:

Protect the hood panel from direct sunlight.

• Do not spot halogen light on the hood panel.
• Do not cover the hob control panel.
• Do not interrupt the signal between the hob and the hood (e.g. with the hand, a cookware handle or a tall pot). See the picture. The hood in the picture is only exemplary.

Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The Electrolux cooker hoods that work with this function must have the symbol .

7. CARE AND CLEANING

WARNING! Refer to Safety chapters.

7.1 General information

Clean the hob after each use. Always use cookware with a clean base. Scratches or dark stains on the surface have no effect on how the hob operates. Use a special cleaner suitable for the surface of the hob. Use a special scraper for the glass.

7.2 Cleaning the hob

Remove immediately: melted plastic, plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface. Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth. Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth.

8. TROUBLESHOOTING

WARNING! Refer to Safety chapters.

8.1 What to do if...

Problem Possible cause Remedy You cannot activate or op‐ erate the hob. The hob is not connected to an electrical supply or it is connected incorrectly. Check if the hob is correct‐ ly connected to the electri‐ cal supply. Refer to the connection diagram. The fuse is blown. Make sure that the fuse is the cause of the malfunc‐ tion. If the fuse is blown again and again, contact a qualified electrician. You do not set the heat setting for 10 seconds. Activate the hob again and set the heat setting in less than 10 seconds. You touched 2 or more sensor fields at the same time. Touch only one sensor field. There is water or fat stains on the control panel. Clean the control panel. An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactiva‐ ted. You put something on one or more sensor fields. Remove the object from the sensor fields. The hob deactivates. You put something on the Remove the object from the sensor field. sensor field

Residual heat indicator does not come on. The zone is not hot be‐ cause it operated only for a short time or the sensor is damaged. If the zone operated suffi‐ ciently long to be hot, speak to an Authorised Service Centre. Hob²Hood does not work. You covered the control panel. Remove the object from the control panel. You use a very tall pot which blocks the signal. Use a smaller pot, change the cooking zone or oper‐ ate the hood manually. The zone is hot. Let the zone become suffi‐ ciently cool. Automatic Heat Up does not operate. ENGLISH Problem

Possible cause Remedy The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between two levels. Power management oper‐ ates. Refer to "Daily use". The sensor fields become hot. The cookware is too large Put large cookware on the or you put it too near to the rear zones, if possible. controls. There is no sound when The sounds are deactiva‐ you touch the panel sensor ted. fields. Activate the sounds. Refer to "Daily use". comes on. Child Safety Device or Lock operates. Refer to "Daily use". comes on. There is no cookware on the zone. Put cookware on the zone. The cookware is unsuita‐ ble. Use suitable cookware. Refer to "Hints and tips". The diameter of the bottom Use cookware with correct of the cookware is too dimensions. Refer to small for the zone. "Technical data". and nately. appear alter‐ The power is too low due to unsuitable cookware or an empty pot. Use the appropriate type of cookware. Refer to "Hints and Tips" and "Technical Data". Do not activate any zone with an empty pot on it. and nately. appear alter‐ The pot is empty or con‐ tains some liquid other than water, e.g. oil. Avoid using the function with liquids other than wa‐ ter. and nately. appear alter‐ There is too much or too little water in the pot. You boiled some food oth‐ er than water and pota‐ toes. The boiling point was moved in time and the SenseBoil® function could not work properly. Refer to "Hints and Tips". Only boil water and pota‐ toes with the use of Sense‐ Boil®. None of the cooking zones is ready to be used with the SenseBoil® function. There is some residual heat on the cooking zones you want to choose or they are still in use. Finish your previous cook‐ ing activities and choose a free cooking zone without any residual heat. You hear a beep sound, the indicators above blink and the SenseBoil® function does not start.

www.electrolux.com Problem Possible cause Remedy and a number come on. There is an error in the hob. Deactivate the hob and ac‐ tivate it again after 30 sec‐ onds. If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the prob‐ lem continues, speak to an Authorised Service Centre. You can hear a constant beep noise. The electrical connection is Disconnect the hob from incorrect. the electrical supply. Ask a qualified electrician to check the installation.

8.2 If you cannot find a

solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet. PNC 949 596 973 00

220 - 240 V / 400 V 2N 50 - 60 Hz

7.2 kW

9.2 Cooking zones specification

Cooking zone Nominal pow‐ er (maximum heat setting) [W] PowerBoost [W] The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.

For optimal cooking results use cookware no larger than the diameter in the table.

10. ENERGY EFFICIENCY

10.1 Product information according to EU 66/2014 valid for EU

market only Model identification KIS62449 Type of hob Built-In Hob Number of cooking zones

Heating technology Induction Diameter of circular cook‐ Left front ing zones (Ø) Left rear Right front Right rear Energy consumption per Left front cooking zone (EC electric Left rear cooking) Right front Right rear Energy consumption of the hob (EC electric hob)

181.2 Wh / kg

EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance The energy measurements referring to the cooking area are identified by the markings of the respective cooking zones.

10.2 Energy saving

You can save energy during everyday cooking if you follow below hints.

When you heat up water, use only the amount you need. If it is possible, always put the lids on the cookware. Before you activate the cooking zone put the cookware on it. Put the smaller cookware on the smaller cooking zones. Put the cookware directly in the centre of the cooking zone. Use the residual heat to keep the food warm or to melt it.

11. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

www.electrolux.com Kochzone Vorne Hin‐ links ten links P 20 P 25 P 30 P 35 P 40 P 45 P 50 P 60 PNC 949 596 973 00

220 - 240 V/400 V 2N, 50 - 60 Hz

7.2 kW

www.electrolux.com Energieverbrauch pro Kochzone (EC electric cooking) P 72 — 7200 W P 15 — 1500 W P 20 — 2000 W P 25 — 2500 W P 30 — 3000 W P 35 — 3500 W P 40 — 4000 W P 45 — 4500 W P 50 — 5000 W P 60 — 6000 W