ManualGo.com HK634060XB - Hob AEG - Free user manual and instructions
Find the device manual for free HK634060XB AEG in PDF.
Download the instructions for your Hob in PDF format for free! Find your manual HK634060XB - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HK634060XB by AEG.
USER MANUAL HK634060XB AEG
How to install your AEG Radiant Hob - Worktop installation
3.5 Beskyttelsesboks
How to install your AEG Radiant Hob - Worktop installation
3.5 Beschermingsdoos
Zachtjes bakken: escalope, kalfsvlees cordon bleu, cutlets, rissoles, worstjes, lever, roux, eieren, pannenkoeken, do‐ nuts.
Zware friet, hash browns, lenden‐ steaks, steaks.
STOP+GO is in werking.
Energieverbruik per kookzone (EC electric cooking)
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support
Register your product for better service: www.registeraeg.com Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop
CUSTOMER CARE AND SERVICE Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice.
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect
installation or usage. Always keep the instructions in a safe and accessible location for future reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children of less than 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
Children should be supervised to ensure that they do not play with the appliance. Keep all packaging away from children and dispose of it appropriately. WARNING: Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts become hot during use. If the appliance has a child safety device, it should be activated. Children shall not carry out cleaning and user maintenance of the appliance without supervision.
WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. WARNING: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility. ENGLISH
CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously.
WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use the appliance before installing it in the built-in structure. Do not use a steam cleaner to clean the appliance. If the glass ceramic surface / glass surface is cracked, switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply. In either case contact the Authorised Service Centre. If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard. WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.
2. SAFETY INSTRUCTIONS
2.1 Installation WARNING! Only a qualified person must install this appliance. WARNING! Risk of injury or damage to the appliance. • •
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with the appliance.
Keep the minimum distance from other appliances and units. Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. Seal the cut surfaces with a sealant to prevent moisture from causing swelling. Protect the bottom of the appliance from steam and moisture. Do not install the appliance next to a door or under a window. This prevents hot
cookware from falling from the appliance when the door or the window is opened.
If the appliance is installed above drawers make sure that the space, between the bottom of the appliance and the upper drawer is sufficient for air circulation. The bottom of the appliance can get hot. Make sure to install a separation panel made from plywood, kitchen carcass material or other non-flammable materials under the appliance to prevent access to the bottom. The separation panel has to cover the area under the hob completely.
2.2 Electrical Connection
WARNING! Risk of fire and electric shock. • • • •
All electrical connections should be made by a qualified electrician.
The appliance must be earthed. Before carrying out any operation make sure that the appliance is disconnected from the power supply. Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot. Use the correct electricity mains cable. Do not let the electricity mains cable tangle. Make sure that a shock protection is installed. Use the strain relief clamp on the cable. Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to a socket. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable. The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
ENGLISH Connect the mains plug to the mains socket only at the end of the installation.
Make sure that there is access to the mains plug after the installation. If the mains socket is loose, do not connect the mains plug. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.
WARNING! Risk of injury, burns and electric shock. • • • • • • • • • •
Remove all the packaging, labelling and protective film (if applicable) before first use.
This appliance is for household (indoors) use only. Do not change the specification of this appliance. Make sure that the ventilation openings are not blocked. Do not let the appliance stay unattended during operation. Set the cooking zone to “off” after each use. Do not put cutlery or saucepan lids on the cooking zones. They can become hot. Do not operate the appliance with wet hands or when it has contact with water. Do not use the appliance as a work surface or as a storage surface. If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock. When you place food into hot oil, it may splash. WARNING! Risk of fire and explosion
Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
The vapours that very hot oil releases can cause spontaneous combustion. Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. WARNING! Risk of damage to the appliance.
Do not keep hot cookware on the control panel.
Do not put a hot pan cover on the glass surface of the hob. Do not let cookware boil dry. Be careful not to let objects or cookware fall on the appliance. The surface can be damaged. Do not activate the cooking zones with empty cookware or without cookware. Do not put aluminium foil on the appliance. Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface. This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.
2.4 Care and cleaning
Switch off the appliance and let it cool down before cleaning.
Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
To repair the appliance contact the
Authorised Service Centre. Use original spare parts only. Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
WARNING! Risk of injury or suffocation. • • •
Contact your municipal authority for information on how to dispose of the appliance.
Disconnect the appliance from the mains supply. Cut off the mains electrical cable close to the appliance and dispose of it.
Clean the appliance regularly to prevent the deterioration of the surface material.
3. INSTALLATION WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the information below from the rating plate. The rating plate is on the bottom of the hob.
3.2 Built-in hobs Only use the built-in hobs after you assemble the hob into correct built-in units and work surfaces that align to the standards.
3.3 Connection cable
The hob is supplied with a connection cable.
To replace the damaged mains cable, use the cable type: H05V2V2-F which withstands a temperature of 90 °C or higher. Contact an Authorised Service Centre. The connection cable may only be replaced by a qualified electrician.
If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances.
Find the video tutorial "How to install your
AEG Radiant Hob - Worktop installation" by typing out the full name indicated in the graphic below. www.youtube.com/electrolux www.youtube.com/aeg
How to install your AEG Radiant Hob - Worktop installation
If you use a protection box (an additional accessory), the protective floor directly below the hob is not necessary. The protection box accessory may not be available in some countries. Contact Customer Support
You cannot use the protection box if you install the hob above an oven.
4. PRODUCT DESCRIPTION
4.1 Cooking surface layout 1
4.2 Control panel layout
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
ON / OFF To activate and deactivate the hob.
Lock / Child Safety Device
To lock / unlock the control panel.
STOP+GO To activate and deactivate the function.
To activate and deactivate the outer ring.
Heat setting display
To show the heat setting.
Timer indicators of cooking zones
To show for which zone you set the time.
To show the time in minutes.
To activate and deactivate the outer ring.
To select the cooking zone.
To increase or decrease the time.
To set a heat setting.
The cooking zone is deactivated.
The cooking zone operates.
The dot means a change by half of a heating level.
Automatic Heat Up operates. There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / Child Safety Device operates. Automatic Switch Off operates.
4.4 Residual heat indicator
As long as the indicator is on, there is a risk of burns from residual heat.
The indicator zone is hot.
appears when a cooking
The indicator may also appear:
for the neighbouring cooking zones even if you are not using them, when hot cookware is placed on cold cooking zone, when the hob is deactivated but the cooking zone is still hot.
The indicator disappears when the cooking zone has cooled down.
5. DAILY USE WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch for 1 second to activate or deactivate the hob.
all cooking zones are deactivated, you do not set the heat setting after you activate the hob, you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates.
Remove the object or clean the control panel. you do not deactivate a cooking zone or change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and the time after which the hob deactivates: Heat setting ,1-2
The hob deactivates after
5.3 The heat setting
to increase the heat setting. Touch
to decrease the heat setting. Touch and at the same time to deactivate the cooking zone.
5.4 Activating and deactivating the outer rings
You can adjust the surface you cook to the dimension of the cookware.
To activate the outer ring: touch the sensor field. The indicator comes on. To deactivate the outer ring: touch the sensor field until the indicator goes out.
5.5 Automatic Heat Up
If you activate this function you can get a necessary heat setting in a shorter time. The function sets the highest heat setting for some time and then decreases to the correct heat setting. To activate the function the cooking zone must be cold. To activate the function for a cooking zone: touch
until the correct heat setting
comes on. After 3 seconds
To deactivate the function: touch
• Count Down Timer You can use this function to set the length of a single cooking session. First set the heat setting for the cooking zone, then set the function. To set the cooking zone: touch repeatedly until the indicator of a cooking zone appears. To activate the function or change the time: touch or of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash, the time counts down. To see the remaining time: touch to set the cooking zone. The indicator of the cooking zone starts to flash. The display shows the remaining time. To deactivate the function: touch the cooking zone and then touch
remaining time counts down to 00. The indicator of the cooking zone disappears.
You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting.
When the countdown ends, an acoustic signal sounds and 00 flashes. The cooking zone deactivates.
To stop the sound: touch
Set the heat setting first.
To activate the function: touch . comes on for 4 seconds. The Timer stays on.
You can use this function when the hob is activated and the cooking zones do not operate. The heat setting display shows
To deactivate the function: touch previous heat setting comes on.
When you deactivate the hob, you also deactivate this function.
To activate the function: touch
touch or of the timer to set the time.
When the time finishes, an acoustic signal sounds and 00 flashes.
5.9 Child Safety Device
To stop the sound: touch
To activate the function: activate the hob
To deactivate the function: touch
then touch . The remaining time counts down to 00.
The function has no effect on the operation of the cooking zones.
This function sets all cooking zones that operate to the lowest heat setting.
When the function operates, you cannot change the heat setting. The function does not stop the timer functions.
To deactivate the function: touch previous heat setting comes on.
. Do not set any heat setting. Touch
for 4 seconds. the hob with
To deactivate the function: activate the hob with
. Do not set any heat setting. Touch
comes on. Deactivate
To override the function for only one cooking time: activate the hob with
comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you deactivate the hob with
comes on. Deactivate
5.7 STOP+GO To activate the function: touch comes on.
This function prevents an accidental operation of the hob.
the function operates again.
6. HINTS AND TIPS WARNING!
Refer to Safety chapters.
ENGLISH The bottom of the cookware must be as thick and flat as possible.
Ensure pan bases are clean and dry before placing on the hob surface.
In order to avoid scratches, do not slide or rub the pot across the ceramic glass.
Cookware made of enamelled steel and with aluminium or copper bottoms can cause a colour change on the glassceramic surface.
6.2 Examples of cooking applications
The data in the table is for guidance only.
Keep cooked food warm.
Put a lid on the cookware.
Mix from time to time.
Solidify: fluffy omelettes, baked eggs.
Simmer rice and milkbased dishes, heat up ready-cooked meals.
Add at least twice as much liquid as rice, mix milk dishes halfway through the procedure.
Steam vegetables, fish, meat.
Add a couple of tablespoons of liquid.
Use max. ¼ l of water for 750 g of po‐ tatoes.
Cook larger quantities of food, stews and soups.
Up to 3 l of liquid plus ingredients.
Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts.
Turn halfway through.
Heavy fry, hash browns, loin steaks, steaks.
Turn halfway through.
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
7. CARE AND CLEANING WARNING!
Refer to Safety chapters.
7.2 Cleaning the hob
7.1 General information
Clean the hob after each use.
Always use cookware with a clean base. Scratches or dark stains on the surface have no effect on how the hob operates. Use a special cleaner suitable for the surface of the hob. Use a special scraper for the glass.
Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface.
Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and a nonabrasive detergent. After cleaning, wipe the hob dry with a soft cloth.
Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth.
8. TROUBLESHOOTING WARNING!
Refer to Safety chapters.
8.1 What to do if...
You cannot activate or operate the hob.
The hob is not connected to an elec‐ Check if the hob is correctly connected trical supply or it is connected incor‐ to the electrical supply. rectly.
Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.
You do not set the heat setting for
Activate the hob again and set the heat setting in less than 10 seconds.
You touched 2 or more sensor fields at the same time.
Touch only one sensor field.
Refer to "Daily use".
There is water or fat stains on the control panel.
Clean the control panel.
An acoustic signal sounds and the hob deactivates.
An acoustic signal sounds when the hob is deactivated.
You put something on one or more sensor fields.
Remove the object from the sensor fields.
The hob deactivates.
You put something on the sensor
Remove the object from the sensor field.
Residual heat indicator does not come on.
The zone is not hot because it oper‐ ated only for a short time or the sen‐ sor is damaged.
If the zone operated sufficiently long to be hot, speak to an Authorised Service
Automatic Heat Up does not op‐ erate.
Let the zone become sufficiently cool.
The highest heat setting is set.
The highest heat setting has the same power as the function.
You decreased the heat setting to 0.
Start from 0 and increase the heat set‐ ting.
You cannot activate the outer ring.
ENGLISH First, activate the inner ring by chang‐ ing the heat setting.
There is a dark area on the multiple zone.
The sensor fields become hot.
comes on. and a number come on.
You can hear a constant beep noise.
It is normal that there is a dark area on the multiple zone.
The cookware is too large or you put Put large cookware on the rear zones, it too near to the controls. if possible.
Child Safety Device or Lock oper‐ ates.
Refer to "Daily use".
There is an error in the hob.
Deactivate the hob and activate it again after 30 seconds. If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised
The electrical connection is incor‐ rect.
Disconnect the hob from the electrical supply. Ask a qualified electrician to check the installation.
The second phase of the power sup‐ Check if the hob is correctly connected ply is missing. to the electrical supply. Remove the fuse, wait one minute, and insert the fuse again.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The information about guarantee period and Authorised Service
Centres are in the guarantee booklet.
9.2 Cooking zones specification
Nominal Power (Max heat setting)
Cooking zone diameter [mm]
For optimal cooking results use cookware no larger than the diameter of the cooking zone.
Number of cooking zones
Diameter of circular cooking zones (Ø)
Left rear Right front
Lenght (L) and width (W) of non circular cooking zone
Energy consumption per cooking zone (EC electric cooking)
Left rear Right front Right rear
Energy consumption of the hob (EC electric hob)
* For European Union according to EU
66/2014. For Belarus according to STB 2477-2017, Annex A. For Ukraine according to 742/2019. EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance
You can save energy during everyday cooking if you follow below hints.
When you heat up water, use only the amount you need.
ENGLISH If it is possible, always put the lids on the cookware.
Before you activate the cooking zone put the cookware on it. The cookware bottom should have the same diameter as the cooking zone. Put the smaller cookware on the smaller cooking zones. Put the cookware directly in the centre of the cooking zone. Use the residual heat to keep the food warm or to melt it.