UNIVERSELLE 4 - Universal remote RCA - Free user manual and instructions

USER MANUAL UNIVERSELLE 4 RCA

Battery Installation 3

Programming Your Universal Remote

TV 4

TV Codes 4-5

VCR. 6

VCR Codes. 6-7

Cable Box. 8

Cable Box Codes 9

Programming With Code Search 9

Retrieval Codes 10

TV Menu. 11

Sleep Feature 12

Trouble Shooting. 13

Help Line 13

Button Description

INDICATOR LIGHT

The Indicator Light flashes to show that the remote is working.

POWER

The POWER button operates the same as your original remote Note: Some RCA, GE and ProScan models require you to press the device button to turn the device on and the POWER button to turn the device off.

CODE SEARCH

Used to program the remote or to search through codes.

TV, VCR, & CABLE

The TV, VCR, and CABLE buttons are used to select the device you want to control.

REW, PLAY, FWD, REC, STOP, & PAUSE

The REW, PLAY, FWD, REC, STOP, & PAUSE buttons operate the same as on your original VCR remote. You must press the REC button twice to begin recording.

TV·VCR

The TV VCR button operates the TV VCR function of your VCR.

ENTER

The ENTER button is used to complete channel selection for some brands of TV. It is also used to complete the code entry process.

VOL & CHAN

The VOL (Volume) and CHAN (Channel) buttons increase or decrease the channel numbers or volume.

MUTE

To MUTE the volume on the TV.

PREV CH

PREV CH allows you to go to the previous channel you selected. Operates the same as Last Channel, Go Back or Recall button on your original remote.

0-9

The number buttons operate the same as on your original remote, and are used for entering device codes or channel numbers.

MENU

The MENU button calls up the TV set up menu.

SLEEP

The SLEEP button allows you to set a time to turn off the TV automatically.

Battery Installation

Your Universal Remote requires 2 new AAA alkaline batteries.

To install the batteries:

1. On the back of the remote, push and slide the cover off.
2. Match the batteries to the + and - marks inside the battery case, then insert the batteries.
3. Press and slide the battery cover back into place.

Note: Reprogramming may be required after batteries are removed.

Programming For TV

1. Manually turn on the TV.

Find the three-digit code for your TV in the code list below.

1. Press and hold the CODE

SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.

CODE SEARCH

INDICATOR LIGHT

1. Press and release the TV button (The INDICATOR LIGHT will blink then remain lit).
2. Enter the code using the Number Buttons.

After your code is entered, the INDICATOR LIGHT will turn off.
5. Aim the remote at your TV and press the POWER button. Your TV should turn off.

Note: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 9.

1. With your TV on, press CHAN+. If the TV responds, no further programming is required.
2. Enter your code here for easy reference.

TV	(BLINK)
①	②
④	⑤
⑦	⑧
	⑨
	⑩
	(OFF)

TV Code List

Abex 172
Admiral .001, 173
Adventura 174
Aiko. 016
Akai. 002
Alleron. .046
Amtron .038
Anam National 003, 038
AOC .006, 005, 004, 007
Audiovox. 038
Belcor .004
Bell & Howell .001, 083, 162
Bradford .038
Brokwood .004
Candle .004, 006, 008, 174
Celebrity 002
Citizen .016, 171, 004, 006, 008
038,105,174,177
Colortyme .004,006
Concerto .004, 006
Contec / Cony.012, 013, 038
Craig .038
Crown .038, 171
Curtis Mathes 171,000,004
006,015,105,162

CXC 038
Daewoo.016, 190, 005
171,004,006,017,127
Daytron. 004, 006, 171
Dimensia. 000
Dumont. .004, 151
Dynatech. .004
Electroband. 002
Electrohome .004, 006, 002, 003
019,022
Emerson .030, 171, 191, 004
038, 046, 006, 012, 023, 024,025
026, 027, 028, 029, 031, 032, 033
034, 035, 036, 037, 039, 041, 042
043,044,047,123,124,162 177
178
179
Envision .004,006Fisher.042-042-051-169-189
Fisher....048,049,051,162,180 FujiTu: 016
Fujitsu 046
Funsei 038, 046
Futurec. 038,046 Futuretec 038
Futuretec. 058 GE .000,054,003,004,006
022.052.055.087.164.165
166,167,168,181
Gibraltar .004, 151

TV Code List Continued

Goldstar	.005, 156, 004, 006
...172, 012, 019, 056, 057, 058
...155, 171
Grundy	.171, 038, 046
Hallmark	.004, 006
Harvard	.038
Hitachi...059, 004, 148, 006 012
...013, 060, 061, 135, 136, 137
...138, 139, 140, 141, 142, 143
...144, 145, 146, 150, 179
IMA	.038
Infinity	.062
Janeil	.174
JBL	.062
JCB	.002
JC Penny ...000, 054, 005, 171
004, 052, 006, 172, 008 020 058
...063, 064, 072, 087, 105, 181
Jensen	.004, 006
JVC...159, 013, 012, 182, 054
060, 065, 066, 067, 123 157, 158
Kawasho	.002, 004, 006
Kenwood	.004, 006, 019
Kloss Novabeam .068, 069, 174
...183
KTV...171, 038, 177, 070
Loewe	.062
Logik	.083
Luxman	.004, 006
LXI...000, 062, 006, 073, 162
...181, 049, 072
Magnavox...062, 004, 006, 130
...134, 183, 008, 019, 068, 069
...075, 076, 077, 088, 131, 132
...133, 219, 235
Majestic	.083
Marantz	.004, 006, 062
Megatron	.006, 059
Memorex	.083, 006 001
...082, 162
MGA	.005, 004, 006
...079, 082, 019, 022, 051, 080
Midland	.054, 151, 171
...172, 181
Minutz	.052
Mitsubishi	.005, 004, 006
...125, 082, 081, 019, 022, 051
...079, 080, 135
Montgomery Ward	.083
Motorola	.003, 173
MTC...005, 004, 105, 006
Multitech	.038
NAD	.006, 185, 072
NEC...005, 004, 006, 003
Nikko	.006, 016
NTC	.016
Onwa	.038
Optimus	.185
Optonica	.095, 173
Orion	.191, 035
Panasonic...170, 054, 062, 003
Philco...062, 005, 004, 006, 183
...008, 012, 019, 003, 068, 069
...075, 077
Philips...062, 004, 075, 008, 019
...003, 012, 068, 069, 076, 086
...087, 088
Pilot	.004, 171
Pioneer	.004, 006
...090, 091, 092, 136, 179, 185
Portland	.016, 005, 171
...004, 006
Price Club	.105
Prism	.054
Proscan	.000, 181
Proton...004, 006, 012, 093
Pulsar	.151
Pulser	.004
Quasar	.003, 054, 070
Radio Shack / Realistic	.000
...095, 171, 004, 038, 006, 012
...049, 162
RCA...000, 100, 005, 003, 004
...006, 007, 019, 096, 098, 099
...101, 102, 103, 129, 179, 181
...188, 190, 203, 233

Runco	.151
Sampo	.004, 006, 171, 172
Samsung	.171, 004, 005, 105
.006, 012, 015, 017, 019, 104	.106, 172
...	.191
Sansui	.048, 080, 004, 180, 162
...	.169, 049
Scotch	.006
Scott	.004, 038, 046, 006, 012
...	.024, 035
Sears	.000, 048, 189, 004, 046
...	.006, 013, 019, 049, 051, 066
...	.072, 109, 110, 162, 180, 181
Sharp	.173, 095, 171, 004, 006
...	.012, 029, 111, 112, 113, 122
Shogun	.004
Signature	.001, 083
Simpson	.008
Sony	.002, 218
Sounddesign	.004, 038, 046, 006
...	.008
Squareview	.189
SSS	.004, 038
Starlite	.038
Supreme-Macy	.174
Supreme	.002
Sylvania	.062, 004, 006, 088
...	.076, 116, 008, 019, 068, 069
...	.075, 077, 161, 183
Symphonic	.038, 189, 033
Tandy	.173
Tatung	.003
Technics	.054
Techwood	.004, 006, 054
Teknika	.016, 005, 171, 004
...	.006, 008, 012, 013, 038, 046
...	.076, 082, 083, 105, 170
Tera	.004, 012, 093
TMK	.004, 006
Toshiba	.105, 162, 160, 161
...	.049, 072, 109, 118
Totevision	.171
Universal	.052, 087
Victor	.066, 182
Vidtech	.004, 005, 006
Viking	.174
Wards	.000, 062, 095, 005
...	.004, 046, 052, 006, 083, 001
...	.019, 024, 033, 068, 069, 075
...	.076, 087, 088, 119, 120
Yamaha	.004, 005, 006, 019
Zenith	.051, 083, 004, 152
...	.151, 153, 154, 217

Programming For VCR

1. Manually turn on the VCR.

Find the three-digit code for your VCR in the code list below.

1. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.

2. Press and release the VCR button (The INDICATOR LIGHT will blink then remain lit).

3. Enter the code using the Number Buttons.

After your code is entered, the INDICATOR LIGHT will turn off.

1. Aim the remote at your VCR and press the POWER button. Your VCR should turn off.

Note: If your VCR does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 9.

1. With your VCR on, press CHAN+. If the VCR responds, no further programming is required.

2. Enter your code here for easy reference.

VCR Code List

Admiral	.001
Adventura	.026
Aiko	.027
Aiwa	.026
Akai	.008, 113, 112, 003
.005, 007, 111
American High	.021
Asha	.013
Audio Dynamics	.009, 010
Audiovox	.014
Bell & Howell	.011
Beaumark	.013
Broksonic	.031, 025, 012
Calix	.014
Candle	.014, 013, 015, 018
.016, 017, 019
Canon	.021, 022
Cahehart	.020, 110
Carver	.062
CCE	.027, 061
Citizen	.014, 013, 027, 015
.016, 017, 018, 019
Colortyme	.009
Colt	.061

Craig	.013, 014, 023, 061
Curtis-Mathes	.022, 013, 115
.024, 000, 009, 016, 018, 021
Cybernex	.013
Daewoo	.027, 025, 015, 017
.019, 026, 028, 110
Daytron	.110
DBX	.009, 010
Dimensia	.000
Dynatech	.026
Electrohome	.014, 029
Electrophonic	.014
Emerson	.014, 025, 026, 065
.041, 015, 012, 021
.024, 029, 030, 031
.032, 033, 034, 036
.037, 038, 039, 040
.042, 044, 045, 046
.047, 105, 113, 116
.117, 130
Fisher	.011, 023, 052, 048
.049, 050, 051, 118
Fuji	.021, 119
Funai	.026

VCR Code List Continued

Garrard	.026
GE .000, 022, 013, 115
Goldstar .053, 021, 120
Harman Kardon .009
Harwood .061
Headquarter .011
Hitachi .055, 120, 056, 057
..107, 111
HI-Q .023
Instant Replay .021
JCL .021
JC Penny .014, 011, 022, 013
..009, 118, 060, 107
..010, 021
Jensen .055, 056, 111
JVC .009, 010, 011, 018
..111, 123
Kenwood .009, 010, 123, 111
..011, 016, 018
KLH .061
Kodak .014, 021
Lloyd .026
Logik .061
LXI .014
Magnavox .022, 062, 104, 063
..021, 108, 124
Magnin .013
Marantz .062, 011, 010, 016
..009, 018, 021, 022, 064
Marta .014
Masushita .021
MEI .021
Memorex .026, 014, 104, 001
..011, 013, 021, 022, 023
MGA .029, 065, 113
MGN Tech .013
Midland .053
Minolta .055, 056, 107
Mitsubishi .065, 055, 072, 029
..056, 066, 067, 068
..069, 070, 071, 073
..074, 106, 113, 123
Montgomery Ward .001, 075
Motorola .001, 021
MTC .013, 026
Multitech .013, 016, 026
..053, 061
NEC .064, 076, 011, 010
..079, 009, 018, 078
..111, 123
Nikko .014
Noblex .013
Olympus .021
Orion .031
Optimus .001, 014
Optonica .096
Panasonic .109, 021, 022, 125
..126, 127
Pentax .016, 055, 056
..107, 120
Pentex Research .018
Philco .022, 062, 063, 021
Philips .062, 096, 022
..021, 124
Pilot .014
Pioneer .055, 010, 080
..081, 123
Portland .016, 017, 019, 110
ProScan .000
Protec .061
Pulsar .104
Quarter .011
Quartz .011
Quasar .021, 022, 125
RCA .089, 000, 055, 022
..091, 003, 013, 021
..056, 082, 083, 084
..085, 086, 087, 088
..090, 107, 115, 120, 125
Radio Shack / Realistic .022
..014, 001, 011, 013
..023, 021, 026, 029
..049, 050, 096

Radix	.014
Randex	.014
Ricoh	.128
Runco	.104
Samsung .013, 015, 112, 053
Sanky .001, 104
Sansui .010, 092, 111, 123
Sanyo .011, 013, 023
Scott .025, 065, 015, 012
Sears .014, 055, 011, 023
Shintom .014, 055, 011, 023
Shogun .013, 021, 028, 048
Signature .049, 050, 051, 056, 107
Sharp .001, 095, 017, 029
Shintom .094, 096, 097
Shintom .056, 061, 098
Shogun .013, 021, 028, 048
Signature .001
Singer .021, 061, 128
Sony .099, 119, 098
STS .021, 107
Sylvania .022, 062, 026, 065
... .021, 063, 065, 124
Symphonic .026
Tandy .011
Tashiko .014
Tatung .111
Teac .026, 085, 111
Technics .021, 109
Teknika .026, 022, 014, 129
... .021, 100
TMK .013, 024, 047
Toshiba .015, 055, 049, 051
... .065, 116
Totevision .013, 014
Unitech .013, 014
Vector Research .009, 010
... .015, 016
Victor .010
Video Concepts .009, 010
... .015, 016, 113
Videosonic .013
Wards .026, 022, 013, 055
... .001, 061, 014, 015
... .021, 023, 029, 056
... .096, 101, 102, 103
... .107, 116
XR-1000 .021, 026, 061
Yamaha .009, 010, 011
... .018, 111
Zenith .104, 119, 098, 128

Programming For Cable Box

1. Manually turn on the Cable Box. Find the three-digit code for your Cable Box in the code list below.
2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the CABLE button (The INDICATOR LIGHT will blink then remain lit).
4. Enter the code using the Number Buttons.
   After your code is entered, the INDICATOR LIGHT will turn off.
5. Aim the remote at your Cable Box and press the POWER button. Your Cable Box should turn off.
   Note: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 9.
6. With your Cable Box on, press CHAN+. If the Cable Box responds, no further programming is required.
7. Enter your code here for easy reference.

CODE SEARCH	INDICATOR LIGHT
CABLE	(BLINK)
①	② ③
④	⑤ ⑥
⑦	⑧ ⑨
	⑩
	(OFF)

Cable Box Code List

ABC 001,003,004

005,006,007

Antronix 008, 009

Archer. 008, 009, 010, 011

Cabletenna 008

Cableview. 008

Century 011

Citizen. 011

Colour Voice. 012, 013

Comtronics .015

Contec .016

Eastern 017

Garrard .011

GC Electronics .009

Gemini 018,019

General Instru .049,001,003

Hamlin .035

Hitachi 003

Jasco .011

Jerrold .049, 001, 003, 005

.007,018,023,024,046

Magnavox. 025

Movie Time. 027, 028

NSC 027,028

OAK .029,016

Panasonic. 000, 048

Philips .011, 012, 013, 019

1025,030,031,032

Pioneer. 034, 033

RCA. 000, 047, 049

Realistic. 009

Regal. .022, 035

Regency. 017

Rembrandt .003

Samsung 034

Scientific Atlanta. 006, 036

037,038

Signal .018

Signature .003

Sprucer 000

Standard Component. 039

Starcom .001, 007, 018

Stargate 018

Starquest .018

Tocom. 004, 023

Tusa .018

TV86. 027

Unika .008, 009, 011

United Cable. 001

Universal 008,009,010,011

View Star .015, 016, 025, 027

Zenith .050, 051

Programming With Code Search

If your TV, VCR, or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below.

1. Turn on the device you wish to program.
2. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
3. Press and release the device button for the device you are programming (TV, VCR or CABLE). The INDICATOR LIGHT will blink once then remain lit.
4. Press and release POWER until your device turns off.

Important: You may have to press POWER up to 200 times.

1. When your device turns off, press the ENTER button, the INDICATOR LIGHT will go off.

CODE

SEARCH

INDICATOR

LIGHT

(BLINK)

POWER

ENTER

(OFF)

Retrieving Codes

If you need to find the three-digit code for your TV, VCR or Cable Box after your device is set-up using Code Search, use this procedure.

1. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
2. Press and release the device button for the device's code you are retrieving (TV, VCR or CABLE). The INDICATOR LIGHT will blink once then remain lit.

Note: For AUX, press AUX then the device button for the code you are retrieving.

1. Press and release CODE SEARCH. The INDICATOR LIGHT will turn off.
2. Starting with 0 on the keypad, press the number buttons in order (0-9) until the INDICATOR LIGHT blinks.
3. The number which causes the INDICATOR LIGHT to blink is the first digit of your code.
4. Repeat step 4 until you have retrieved all three numbers in the code.

CODE

SEARCH

INDICATOR

LIGHT

VCR

CABLE

(BLINK)

CODE

SEARCH

(OFF)

(BLINK)

INDICATOR

LIGHT

Television Menu Function

The TV Menu is used to make changes in the TV settings such as setting color, channels, timers, etc.

Entering the TV Menu Mode:

1. Push the TV button on the remote.
2. Push the MENU button.

This puts the remote in TV Menu Mode. The TV Menu should now be visible on the television. The INDICATOR LIGHT will blink continuously to indicate the remote is now in TV Menu Mode.

While in TV MENU these buttons will function as follows:

VOL +/- buttons will operate as CURSOR RIGHT/LEFT.

CHAN UP/DOWN keys will operate as CURSOR UP/DOWN.

For RCA, GE, & ProScan TVs pushing the MENU button will select the highlighted item. The numeric buttons may also be used to select the MENU choice.

Note: Not all functions in competitive models and brands of televisions may be fully supported.

Exiting the TV Menu Mode:

To exit the Menu Mode and clear the TV screen push the TV button on the remote. The INDICATOR LIGHT should go out indicating the remote is now out of TV Menu Mode and will revert to it's normal mode of operation.

Note: The remote will automatically exit the TV Menu Mode after 10 seconds of inactivity with no buttons being pushed.

Special notes:

1. Because of the wide variety of menu formats, some experimenting may be required.
2. SONY: Pressing the ENTER button while in menu mode returns to previous menu.
3. ZENITH: Push the menu button a second time to move from the SET-UP MENU to the VIDEO MENU.

(BLINK)

Sleep Feature

This feature will turn off your TV at the time you choose from 1 to 99 minutes.

To Program Sleep Feature:

1. Press and hold the SLEEP button. INDICATOR LIGHT will stay lit. Release the SLEEP button.
2. Enter time in minutes using the numerical key pad. Indicator light should go off. (Minutes 1 thru 9: press 0 before the actual number Maximum: 99 minutes)
3. Leave remote aimed at television.(Sleep Feature will not work unless remote is left aimed at television.)

INDICATOR

SLEEP

LIGHT

To Turn Off The Sleep Timer:

Sleep timer program will be cancelled and reset to zero by either of the following:

1. Press and hold SLEEP button until INDICATOR LIGHT blinks or press ON-OFF button, turning TV OFF.

Trouble Shooting

Problem	Solution
Indicator light not blinking when you press any button	A) Replace the batteries with 2 new AAA Alkaline batteries. B) Check that batteries are properly installed.
The Remote does not operate your device	A) Try all the codes listed for your brand. B) Try the Code Search method on page 9.
Not performing commands properly	Start Code Search over again to locate the proper code.
Problems programming a TV/VCR Combo Unit	Try the VCR code for your brand. Some combo units, however, may require both a TV and a VCR code for full operation.
VCR not recording	As a safety feature on your remote, you must press the REC button twice.
Channel up and down do not function on an RCA TV	Due to some designs, the original remote will only perform these functions.
Problems changing channels	If your original remote required ENTER after a channel, press ENTER after you select a channel.
No response after pressing a button	A) Make sure you have new batteries, and you are aiming your remote at your devices. B) Check that batteries are properly installed see page 3.
Sleep feature does not work	Remote must remain aimed at television after sleep is set in order for it to work.

Note: Reprogramming may be required after batteries are removed.

Help Line

If you need additional set-up help please call the Helpline at: 1-800-420-7229

RCA Accessories

The following RCA accessories are available through your RCA dealer or by calling 1-800-338-0376.

RC926 Wireless Phone Jack

Turn Just About Any Electrical Outlet Into A Phone Jack Instantly*

Exclusive technology sends phone signal through the electrical wiring in your home.

No Wiring, No Drilling, No Tools! Installs In Two Simple Steps

STEP1

Plug Base Unit into electrical outlet near an existing phone jack, and connect phone jack to Base Unit with included phone cord.

STEP 2

Plug Extension Unit into any other electrical outlet and connect phone to Extension Unit.

Works With:

Coredd Phones

Cordless Phones

Answering Machines

Fax Machines

Computer Modems

Compatible With:

Call Waiting

Call Forwarding

Three-Way Calling

Speed Dialing

Plus Shipping/Handling & Sales Tax

ANT200 Amplified TV Antenna

To receive UHF or VHF stations or serve as a backup for cable outages, purchase the RCA Amplified TV Antenna. Switching between your cable or satellite and your antenna is made easy with an integrated A/B switch. Hooks up to any TV and includes all necessary accessories.

Features include:

• Dipoles tilt and rotate for improved picture
• UHF Loop turn range of 345^
• Gold plated connectors for improved signal conductivity
• Manual Gain Control to Boost Signal
• Five-Year Limited Warranty
• Measures 8% H. X 8% W. X 4% D.

Plus Shipping/Handling & Sales Tax

ANT200

How To Order

To order, see your local RCA retailer. Or:

ORDER BY PHONE:

Have your Visa, MasterCard or Discover Card ready and call the toll-free number listed below. This number should only be used to place orders for the above-listed Accessories.

1-800-338-0376

ORDER BY MAIL:

Complete this order from and mail to: RCA Accessories PO Box 8419 Ronks, PA 17573

Include this completed form with your order.

Description	Model #	Price	Qty.	Total
Wireless Phone Jack	RC926	59.95
Amplified TV Antenna	ANT200	44.95
Sales Tax	We are required by law to collect the appropriate sales tax for each individual state, county, and locality to which the merchandise is being sent.
Shipping and Handling				$5.00
Total Amount Due

Name:

Address:

City/State:

Zip:

Daytime Phone Number:

Check Enclosed Money Order Enclosed

Visa MasterCard Discover

Card Number:

Exp: Signature:

Shipping and handling is charged for all orders.

Please allow 4-6 weeks for mail orders.

90 Day Limited Warranty

Thomson Consumer Electronics warrants that for 90 days from date of purchase this product is free from defects in material and workmanship. If the item is defective within that period, return it at your expense to the dealer from whom it was purchased together with proof of purchase for replacement. This warranty excludes defects or damage due to misuse, abuse, or neglect. The foregoing represents Thomson's sole obligation under this warranty.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For purchases outside the United States, contact your dealer for warranty information

RCA

Help Line (US Only)
If you need additional set-up help, call our toll-free Help Line at 1-800-420-7229.

^6 1999 Thomson Consumer Electronics, Inc.
Trademark(s) ^8 Registered
Marca(s) Registrada(s)

First Class Postage Required

Thomson Consumer Electronics 2000 Clements Bridge Road Deptford NJ. 08096-2011

Attn: Remote Control

Purchase Registration

RCAI

Inside Card

RCU1300 Product Registration

Please complete and return this Purchase Registration Card right away. This information will help us get to know and service our customers better.

1. Mr. Mrs. Ms. Name:

Address:

---

1. Model: RCU1300
2. Date of Purchase/Receipt as Gift: 4. Price: $
3. Age of Purchaser/Gift Recipient:

16-25

26-35

□36-45

46-55

56+

1. What specific need did the Universal Remote help you resolve?

A. Replacing A Lost Remote

B. Replacing A Broken Remote

C. Consolidating Remotes

D. Adding an Extra Remote

1. Where will this remote primarily be used? and with what brand? TV:

VCR: Cable Box:

A. Kitchen

B. Bedroom

C. Family Room/Living Room

D. Other

1. How did you become aware of this remote?

A. Advertisement

B. Salesperson

C. Store Display

D. Received as a Gift

□ E. Friend or Relative

F. Other

---

1. What other brands did you consider buying?

B.RCA

C. One For All

A. None

E. Magnavox

C. One For All

D. Zenith

E. Magnavox

□F.Sony

□G.Other

1. What factors most influenced this purchase? (Check up to 3)

□A. Brand

B. Features

C. Recommendation

D.Price

E. Received as a Gift

□F.Other

What suggestions do you have to improve this product?

Thank you for filling out this card. This information will help us better serve you and others who purchase RCA Consumer Electronics Products. We will not share your information with any other companies.