CT636LES1 - Built-in oven SIEMENS - Free user manual and instructions

USER MANUAL CT636LES1 SIEMENS

Register your product online

Included in delivery

Included in delivery

(Figure A on the fold-out pages) a Fully automatic coffee machine b Instruction manual c Filter instructions d Installation instructions e Connecting cable f Assembly bracket g Spacer h 5 fastening screws (silver) i 2 fastening screws (long/black) j 2 fastening screws (short/black) k 1 sleeve (black) l 2 sleeves (white) m Quick reference guide n Measuring spoon o Water hardness testing strip p Milk tube (set) q Milk container r Suction pipe

... on purchasing this fully automatic coffee machine! You have now acquired a high-quality and modern kitchen appliance. It combines innovative technology with a range of functions and is easy to use. It will enable you to prepare a variety of delicious hot drinks quickly and simply – whether you’re in the mood for an invigorating espresso, a creamy cappuccino, a smooth latte macchiato or white coffee, or a traditional cup of coffee. At the same time the appliance offers you a wide range of options for adapting it to your individual taste. To ensure that you can use this fully automatic coffee machine with all its functions and features reliably and safely, we would like you to familiarize yourself with its components, functions, displays and controls. These instructions are designed to help you. So please take the time to read them before you switch on the appliance.

How to use these instructions You can open up the front cover of this instruction manual. There you will find illustrations of the appliance with each part numbered. These numbers will be referred to throughout the text. Example: brewing unit (15) These instructions also show display texts and symbols in a special way. These enable you to clearly see where we refer to texts or symbols that are marked or displayed on the appliance. Display indicators: “Espresso” Buttons and controls on the display: C The appliance comes with a quick reference guide where you can find the most important functions at a glance. It can be stored in the accessory drawer of the appliance.

Safety instructions Please read and follow the operating instructions carefully and keep them for later reference. Enclose these instructions when you give this appliance to someone else. This appliance is designed for the preparation of normal household quantities in the home, or in household-like, non-commercial environments. Household-like environments include staff kitchens in shops, offices, agricultural and other small businesses or for use by guests at bed-and-breakfast establishments, small hotels and similar residential facilities. W Danger of electric shock! The appliance may only be connected to a power supply with alternating current via a correctly installed socket with earthing Ensure that the protective conductor system of the domestic supply has been correctly installed Connect and operate the appliance only according to the type plate specifications. To avoid potential hazards, repairs must only be carried out by our customer service personnel If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved Keep children under 8 years of age away from the appliance and connecting cable and do not allow them to use the appliance Children shall not play with the appliance Only use the appliance indoors at room temperature and up to 2000 m above sea level Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised 33

Never immerse the appliance or mains cable in water Use only if power cord and appliance show no signs of damage Should a fault occur, pull the plug or disconnect from the mains immediately The appliance contains permanent magnets that may influence electronic implants such as pacemakers or insulin pumps Persons wearing electronic implants must maintain a minimum distance of 10 cm from the front of the appliance and from the following parts upon removal: milk container, milk system, water tank and brewing unit W Risk of suffocation! Do not allow children to play with packaging material Store small parts safely as they can be easily swallowed W Risk of injury! Do not reach into the grinding unit. Be careful not to jam your fingers when closing the door A misuse of the appliance can potentially lead to injury W Risk of burns! The beverage outlet gets very hot. After use, allow to cool down first before touching

(Figures B to E on the fold-out pages) 1 Appliance door a Recessed grip (for opening the door) b Drip plate 2 Display 3 Controls 4 Outlet system (coffee, milk, hot water), height-adjustable a Cover 5 Milk system a Snap lever b Beverage outlet (upper part, lower part) c Milk tube (2 pieces) d Connecting element, metal (for magnet holder) 6 Mains switch J (power supply) 7 Accessory drawer (for quick reference guide and accessories) a Quick reference guide b Measuring spoon c Water hardness strip d Milk tube (set) 8 Removable water tank a Lid for water tank 9 Removable bean container a Lid for bean container 10 Slide regulator for grinding degree setting 11 Magnet holder (for connecting element) 12 Removable drawer (for ground coffee/cleaning tablet) 13 Holder (for milk tube) 14 Protective cover (for brewing unit) 15 Brewing unit a Locking mechanism b Cover 16 Eject lever 17 Removable drip tray a Drip tray cover b Coffee grounds container 18 Collecting tray 19 Holder (for long suction pipe) a Suction pipe 20 Rating plate (E number, FD)

21 Storage shelf with sensor (for milk container) 22 Milk container a Stainless steel container b Lower part of the lid c Upper part of the lid

FF Further information about the appliance, such as how to change the opening angle of the door, can be found in the assembly instructions.

The appliance features user-friendly menu navigation to ensure that operation is as easy as possible while at the same time offering a wide range of functions. That means a range of options can be selected with just a few operating steps. Mains switch J Use the mains switch J (to do so open the door) to switch on the appliance, or to switch it off fully (power supply off).

FF Important: Do not press the mains switch while the appliance is in use. Switch off the appliance only when it is in energy saving mode, so that it can rinse automatically.

Button I Press button I to switch on the appliance or change it to energy saving mode. The appliance is rinsed automatically. The appliance does not rinse if: –– if it is still warm when switched on, or –– if no coffee was dispensed before it was switched off. The appliance is ready for use as soon as the symbols for the drinks selection appear on the display. Button A Press button A to open the menu. Settings can be made and information called up (see the section “Menu”).

Button E Press button E to open the selection of service programmes. Run the desired programme as described in the section “Service programmes”. Button B Press button B to open the selection of “Personalised beverage preparation”. Personal settings for coffee drinks can be saved and called up (see the section “­Personalised drinks”). Button G Press button G after selecting a drink to prepare two cups simultaneously (see the section “Two cups at once”).

FF Press A, E, B or G again to exit the respective menu.

Button C Press C to either begin preparing a drink or launch a service programme. Press C again while the drink is being prepared to prematurely halt dispensing. Rotary selector Turn the rotary selector to navigate in the display or to change parameters. Display (Touchscreen) Information is shown on the display, or settings can be made by touching the touchscreen (see the section “Display”).

General Fill the appropriate container using only pure, cold, uncarbonated water and solely roasted beans. Do not use coffee beans that have been glazed, caramelised or treated with other additives containing sugar, since they will block the brewing unit.

AA Before the appliance can be switched on and used, it must be assembled and connected according to the enclosed assembly instructions.

Setting up the appliance ■■ Remove any protective plastic film.

FF Important: Only use the appliance in a frost-free room. If it has been transported or stored at temperatures below 0°C, wait at least 3 hours before initial use.

■■ Take hold of the appliance door by the recessed grip and open. ■■ Remove the water tank, rinse it and fill it with fresh water up to the “max” mark. ■■ Replace the water tank and click into place. ■■ Remove the bean container, fill with coffee beans and replace. ■■ Set the mains switch to I and close the appliance door. The appliance heats up and is rinsed. The display is activated. “Select language” appears. ■■ Turn the rotary selector to select the desired language and touch [ Continue ] in the display. “Set water hardness” appears.

FF It is important to set the water hardness correctly to enable the appliance to accurately indicate when the descaling programme should be run. The preset water hardness is level 4. If a water softener is installed in the house, please set the water hardness to level 3. You can also check the water hardness by asking your local water supplier.

■■ Use the enclosed test strip to determine the water hardness. Briefly dip the test strip in water and check the result after one minute.

FF Important: Do not press the mains switch while the appliance is in use. Switch off the appliance only when it is in energy saving mode, so it can rinse automatically.

Level Water hardness German (°dH) French (°fH) 1 1-7 1-13 2 8-14 14-25 3 15-21 26-38 4 22-30 39-54

The factory settings of the fully automatic coffee machine are programmed for optimal performance. The appliances switches automatically to the energy saving mode after a configured time and rinses (duration can be set, see “Switch off after” in the section “Menu”).

■■ Turn the rotary selector to set the water hardness determined. ■■ Touch [ Continue ]. “Complete set-up?” appears. ■■ Touch [ Apply ]. The settings are saved. The appliance is ready to use when the drink symbols are shown on the display. The integrated fan switches on each time a drink is dispensed and switches off again after a few minutes. When the appliance is used for the first time after running a service program, or if it has not been operated for a long period, the first beverage will not have the full aroma and should not be consumed. When the fully automatic coffee machine is first used, a suitably thick and stable “crema” is only achieved after the first few cups have been dispensed.

Switch off appliance ■■ Press the I button. The appliance rinses and switches to energy saving mode.

The appliance is equipped with a sensor. If there is a milk container, this will be correspondingly shown on the display when switching to the energy saving mode. If there is milk in the container, please keep in the fridge.

Information is shown on the display, or settings can be made by touching the touchscreen.

Display The display shows the selected drinks, settings and setting options, as well as messages about the appliance’s operating status. Examples: Drink selection

Exception: If only hot water is dispensed, the appliance switches off without rinsing . ■■ To switch the appliance off completely, open the appliance door and set the mains switch to h.

Information Information disappears after pressing the button or after a short time.

Water tank almost empty

Instead of text, a small symbol appears in the lower left area of the display.

This fully automatic coffee machine can be operated using coffee beans or ground coffee (but not instant coffee). If using coffee beans, they will be freshly ground for each brewing. For optimum quality, store the beans in a cool place in sealed containers.

FF Important: Fill the water tank with fresh, uncarbonated, cold water every day. The tank should always contain sufficient water for operating the appliance.

Bean container almost empty Water tank almost empty

Tip: Cups should be prewarmed, e.g. with hot water. This applies ­particularly to small thick-walled espresso cups.

Change water filter Cleaning programme required Descaling programme required

For some settings, coffee is prepared in two stages (see the section “aromaDouble Shot” and “Two cups at once”). Please wait until the process is completely finished.

calc’nClean programme required

Prompts to take action

FF If the action required was carried out, e.g. filling the water tank, the corresponding message and symbol will disappear.

Drink selection Turn the rotary selector to select different drinks: The symbol for the drink selected is shown in the middle. The name of the drink and the values currently set, e.g. for the strength and volume are shown in upper row.

Operation Touch texts or symbols combined with turning the rotary selector to navigate within the display (for an example, see section “Drink adjustment”). An audible signal is heard when touching the display. These audible signals can be switched on or off (see the section “Menu – Key tones”).

The following drinks can be selected: Ristretto Espresso Espresso Macchiato Coffee Cappuccino Latte Macchiato Caffe Latte Milk froth Warm milk Hot water The drink selected can be directly prepared with the pre-set values or first adjusted to individual taste.

Touch [ Adjust ] on the display and different fields will appear, depending on the drink, for adjustment. The field where the value can be changed has a dark background. An example: The values for a cup of coffee can be changed as follows: ■■ Use the rotary selector to select “Coffee”. Coffee

Adjust ■■ Touch [ Adjust ]. The fields containing the preset values appear. The active field, e.g. H has a dark background.

■■ Turn the rotary selector to set the strength of coffee desired, e.g. “YYYY” (strong).

■■ Turn the rotary selector to set the required amount of coffee, e.g. “160 ml”. ■■ Touch the field D.

■■ Turn the rotary selector to set the desired temperature, e.g. “high”.

■■ Save the settings by touching [ Back ] or by starting to dispense the drink.

FF There are different setting options depending on the type of drink. For coffee drinks, for example, the strength, temperature and quantity can be set, for milk only the volume.

The following settings are possible: Coffee strength

Y Very mild YY Mild YYY Regular YYYY Strong YYYYY Very strong XY aromaDouble Shot strong XYY aromaDouble Shot strong+ XYYY aromaDouble Shot strong++

Preparation using coffee beans

aromaDouble Shot The longer the coffee is brewed, the more bitter substances and undesired aromas are released. This has a negative effect on the taste and makes the coffee less easily digestible. So for extra strong coffee, the appliance has a special aromaDouble Shot function. When half the quantity has been prepared, it grinds and brews fresh coffee beans so that only the pleasant, ­aromatic scents are released.

Preparation using coffee beans

The appliance must be ready for use. ■■ Place a cup underneath the beverage outlet. ■■ Use the rotary selector to select “­R istretto”, “Espresso” or “Coffee”. The display shows the selected drink along with the preset values for the strength of the coffee and the amount for this drink.

YYYY The aromaDouble Shot function is not available for ristretto, espresso macchiato, and when ground coffee is used. Drink temperature Values for coffee drinks: normal

S FF The volume differs depending on the type of drink and can be set in ml steps.

The volume dispensed can fluctuate depending on the quality of the milk. If no controls are activated for approx. 30 seconds, the appliance will automatically exit the settings mode. The settings made will be automatically stored.

FF The settings can be changed as described in the section “Drink adjustment”.

■■ Press C to start dispensing. The coffee is brewed and then dispensed into the cup. Press button C again to stop dispensing prematurely.

Preparation using milk

This fully automatic coffee machine has an integrated beverage outlet. This can be used to prepare coffee drinks with milk or also milk froth and warm milk.

BB Risk of burns! The beverage outlet gets very hot. After use, always let it cool down before you touch it.

Milk container The milk container has been designed especially for use together with this fully automatic coffee machine. It is intended solely for use in the household and for storing milk in the refrigerator. The insulated container keeps milk cool for a number of hours.

Preparation using ground coffee

FF FF Connecting the milk container or a milk carton: ■■ Open the appliance door. ■■ Remove the cover of the beverage outlet towards the front. ■■ Connect and fix the milk tubes and ­connecting elements as illustrated.

■■ Press C to start dispensing. The milk is dispensed into the cup or glass first. Then the coffee is brewed and runs into the cup or glass. Press button C again to stop the current step of the process prematurely.

Important: Remove cups or glasses before opening the door in case they fall.

The settings can be changed as described in the section “Drink adjustment”.

Milk froth or warm milk ■■ Place a cup or glass underneath the beverage outlet. ■■ Select “Milk froth” or “Warm milk” with the rotary selector.

FF The settings can be changed as described in the section “Drink adjustment”.

■■ Attach the cover firmly from the front on to the beverage outlet. ■■ Attach the suction pipe and insert into the milk container or a milk carton.

■■ Press C to start dispensing. Milk froth or warm milk is dispensed from the beverage outlet. Press button C again to stop the current step of the process prematurely.

Preparation using ground coffee

FF ■■ Close the appliance door.

FF Dried milk residues are difficult to remove, therefore always clean (see the section “Cleaning the milk system”).

Coffee drinks with milk ■■ Place a cup or glass underneath the beverage outlet. ■■ Select “Espresso Macchiato”, “­C appuccino”, “Latte Macchiato” or “Caffe Latte” with the rotary selector. The display shows the selected drink along with the preset values for the strength of the coffee and the amount for this drink.

When using ground coffee, the setting for the strength of the coffee and dispensing two cups at once is not available. Important: Remove cups or glasses before opening the door in case they fall.

The appliance must be ready for use. ■■ Open the appliance door. ■■ Remove the ground coffee drawer. The removable drawer must be dry. ■■ Put in coffee powder (maximum 2 level measuring spoons); do not press firmly.

FF Caution! Do not use whole beans or instant coffee.

■■ Replace the ground coffee drawer. ■■ Close the appliance door, U will appear on the display.

Dispensing hot water

FF If coffee is not dispensed within 90 seconds, the brewing chamber empties automatically to avoid an overflow. The appliance is then rinsed.

■■ Place a cup underneath the beverage outlet. ■■ Using the rotary selector, select a coffee drink or a coffee drink with milk. The display shows the selected drink along with the preset values for this drink.

FF The settings can be changed as described in the section “Drink adjustment”. For coffee drinks with milk, please observe the instructions in the section “Preparation using milk”.

■■ Press C to start dispensing. The coffee is brewed and then dispensed into the cup. When selecting coffee drinks with milk, the milk is first dispensed and then the coffee brewed.

■■ If still connected, remove the milk tube and touch [ Yes ] on the display. Hot water flows out of the beverage outlet. Press button C again to stop the procedure prematurely.

Press B to open the selection for personalised drinks. Up to 8 storage spaces can be used. Save your favourite drinks that are frequently dispensed here with all their settings.

FF Press B to exit the menu without saving at any time.

Entering or changing drinks ■■ Press B. The selection of memory locations appears. myCoffee 1

FF For another drink with ground coffee, repeat the procedure.

Dispensing hot water

BB Risk of burns! The beverage outlet gets very hot. After use, always let it cool down before you touch it.

The appliance must be ready for use. ■■ Remove the milk tube from the milk container. ■■ Remove any milk or coffee residue from the outlet. ■■ Place a cup or glass underneath the beverage outlet. ■■ Select “Hot water” with the rotary selector.

FF The settings can be changed as described in the section “Drink adjustment”.

■■ Press C to start dispensing. ■■ The message appears “Milk tube removed from milk container?”. 42

Create beverage ■■ Using the rotary selector, choose an empty memory location (empty cup) to make a new entry, or an occupied memory location to change or delete a favourite drink. ■■ At an empty memory location [ Create beverage ] or an occupied memory location [ Change beverage ].

FF If [ Delete beverage ] is selected, the settings for the memory location are deleted and it is again empty.

The menu for adjusting the drinks opens. The last drink dispensed is shown with the last settings selected. ■■ If you do not wish to save last drink dispensed, select another drink with the rotary selector. ■■ Touch each setting to be changed and adjust the values as desired with the rotary selector. Other setting options appear depending on the selection.

■■ Touch [ Continue ] to make other settings.

FF For milk drinks, the mixing ratio of coffee and milk can be set.

■■ The settings can be stored under an individual name. Touch [ Save name ]. The mask for entering the name opens. 3 45 678 9´_ < A B C D E F G H I J K A_________ Cancel

■■ Using the rotary selector, select a letter or a symbol in the upper row. ■■ Touch g to confirm the letter selected or K to delete it. ■■ Select other letters or symbols and confirm. ■■ Touch [ Cancel ] to exit the entry without any modification and open the drinks menu. ■■ With [ Save ] the entry is adopted. The selection menu opens. ■■ Press B to exit the menu.

The selected drink is prepared and then dispensed into both cups.

FF The drink is prepared in two stages (two grinding operations). Please wait until the process is ­completely finished. Two cups at once cannot be dispensed for the settings “aromaDouble Shot” or “ground coffee”.

Adjusting the grind setting

This fully automatic coffee machine has an adjustable grinding unit. This enables the grinding level of the coffee to be individually changed. ■■ Open the appliance door. ■■ Slide the regulator to select the grinding degree setting between finely ground coffee V and coarsely ground coffee W.

Select a personalised drink and dispense ■■ Press B. The selection of memory locations opens. ■■ Use the rotary selector to select the desired memory location. ■■ Place a cup or glass underneath the beverage outlet. ■■ Press C to start dispensing.

Press G to prepare two cups of the selected drink simultaneously. The setting is shown by a second cup symbol and as text, e.g. “2 x Espresso”. ■■ Use the rotary selector to select the desired drink. ■■ Press G. ■■ Place two cups left and right underneath the beverage outlet. ■■ Press C to start dispensing.

■■ Close the appliance door again.

FF For dark roast coffee beans, choose a finer grind, for lighter beans a coarser grind. Tip: Only make small changes to the grinding degree setting. The new setting will not become apparent until after the second cup of coffee.

If the display shows the message “Select a coarser degree of ­grinding”, this means that the beans are being ground too finely. Adjust the grinding level to a coarser setting.

FF Press A to exit the menu at any time. If no entry is made within approx. 30 seconds, the menu closes automatically and the settings are not saved.

The appliance can be locked to protect children against scalding and burns. ■■ Press and hold the A button for at least 4 seconds. ­ ctivated” briefly appears “Childproof lock a on the display. No further operation is now possible; only I can be pressed. ■■ To deactivate the child lock, press and hold the A button for at least 4 seconds. “Childproof lock deactivated” briefly appears on the display.

Language Set the desired language to show the display texts.

FF The menu is used for changing individual settings, accessing information and launching processes. ■■ Press A to open the menu. The different setting options will appear.

Navigating through the menu: Press K and L to select the various setting options, e.g. “Language”. Turn the selector to set, e.g. “English”. Settings

Language English For example: Set the appliance at 15 minutes to switch off automatically: ■■ Press button A. The menu opens. ■■ Touch L repeatedly until the display shows “Switch off after”. ■■ Turn the rotary selector and select “0h 15min”. ■■ Press button A. “Save changes?” appears. ■■ Touch [ Save ]. The setting is saved. The drink selection appears on the display.

The following settings can be made:

Water hardness Set this to the local water hardness. Level “1 (soft)” to “4 (very hard)” can be selected. The preset water hardness is “4 (very hard)”. It is important to set the water hardness correctly to enable the appliance to accurately indicate when the descaling programme should be run.

You can check the water hardness using the enclosed test strip or by asking your local water supplier. If a water softening system is installed in the house, please select the “Softening device” setting.

Water filter If a water filter is inserted, renewed or removed, the setting “Insert”, “Replace” or “Remove” must be made in the menu.

FF A water filter lessens limescale deposits, reduces impurities in water and improves the coffee taste. Water filters are available from retail outlets or from customer services (see the section “Accessories”).

Inserting or renewing a water filter: A new water filter must be rinsed before it can be used. ■■ Select either “Insert” or “Replace” with the rotary selector.

■■ Press the water filter firmly into the opening of the water tank.

Detailed information about the water filter can be found in the manual supplied with the filter. Switch off after To set how long the appliance should wait after the last drink was prepared before it automatically rinses and switches itself off. You can specify values from 15 minutes to 8 hours. The factory setting is 30 minutes.

■■ Fill the water tank with water up to the “max” mark. ■■ Remove the milk tube from the milk container and close the door.

FF Caution: Do not jam the tube when closing the door.

■■ Place a container with a capacity of 0.5 litre under the outlet . ■■ Press button C. Water will now flow through the filter to rinse it. ■■ Then empty the container. The appliance is ready for use again.

FF Rinsing the filter simultaneously activates the setting for the change filter display.

The filter is no longer effective when the “Replace water filter” display appears, or at the latest after two months. It needs to be replaced for reasons of hygiene and to prevent a build-up of limescale (which could damage the appliance). ■■ If a new filter is not inserted, select the setting “Remove” and press button C. The message “Remove filter, reinsert water tank, close door” appears.

FF If the appliance has not been used for a prolonged period (for example, while you are on holiday), the existing filter should be rinsed before the first time the appliance is used again. To do this, simply dispense a cup of hot water.

Illumination Setting the illumination of the beverage outlet. “On”, “When in use” or “Off” can be selected. Brightness illumination Setting the illumination lightness of the beverage outlet. “Level 1” to “Level 10” can be selected. Brightness display Setting the illumination lightness of display. Key tones Switch the signal tones on or off. Clock display Display option for time and date “Off” or “Digital” (on). The settings for this can be changed in the next menu options.

FF If the appliance is switched off at the mains or there is a power failure, the settings for the time and date will be lost.

Clock Setting for the current time. Date-day Setting for the current day. Date-month Setting for the current month. Date-year Setting for the current year. Frost protection Service programme to prevent frost damage during transportation and storage. This programme completely empties the appliance. ■■ Touch [ Start ] to begin running the programme. ■■ Empty the water tank and reinsert.

Care and daily cleaning

■■ If available remove the milk container and close the door. The appliance automatically empties all its pipes. ■■ Empty the drip tray and re-insert. Beverage info Display shows how many drinks have been prepared since its initial use. ■■ Touch [ Display ] to show the information. Factory settings Resets your own settings to the condition when delivered. ■■ Select “Reset” with the rotary selector. The message “Are you sure?” appears. ■■ Touch [ Reset ] or [ Cancel ] to either confirm or interrupt.

■■ Open the door and pull the drip tray out forwards. ■■ Remove drip tray cover and coffee grounds container. ■■ Empty, clean and dry individual parts.

FF Important: The drip tray and coffee grounds container should be emptied and cleaned every day in order to prevent deposits.

■■ Remove the ground coffee drawer, clean under running water and dry well.

Care and daily cleaning

EE Risk of electric shock! Never immerse the appliance in water. Do not steam-clean the appliance. ■■ Wipe the outside of the appliance with a soft, damp cloth. ■■ Clean the display using a micro-­fibre cloth. ■■ Do not use any cleaning agents ­containing alcohol or spirits. ■■ Do not use abrasive cloths or cleaning agents.

■■ Wipe and dry the inside of the appliance (support, drip tray and the ground coffee drawer) and collecting tray. ■■ Replace the dried parts, e.g. the ground coffee drawer.

LL Do not put the following parts in the dishwasher:

Accessory drawer, water tank, lid of the water tank, beverage outlet cover, bean container, lid of the bean container, metal connecting element, ground coffee drawer, protective cover of the brewing unit and the milk container.

MM The following parts may be cleaned in the dishwasher:

■■ Always remove any limescale, residues of coffee or milk, cleaning or descaling solution immediately. It is possible for corrosion to form underneath such deposits.

FF New sponge cloths may contain salts. Salts can cause rust film on stainless steel and must therefore be washed out thoroughly before use.

Drip plate, collecting tray, drip tray, drip tray cover, coffee grounds container, milk tubes, suction pipes, individual parts of the beverage outlet, measuring spoon and individual parts of the milk container lid.

FF If the appliance is cold when switched on, or if it is switched off after dispensing coffee, it rinses automatically. The system is therefore self-cleaning.

Care and daily cleaning

FF Important: If the appliance is not used for a lengthy period (e.g. while you are on holiday), clean the entire appliance thoroughly, including the milk system, the ground coffee drawer and the brewing unit before use.

Cleaning the milk system The milk system is automatically cleaned with a short jet of steam directly after preparing a milk drink.

FF Tip: For particularly thorough cleaning, the milk system can be additionally rinsed with water (see the section “Rinsing the milk system”).

■■ Place an empty glass underneath the beverage outlet. ■■ Press button C. The milk system is rinsed with water. ■■ Then empty the glass. ■■ Press E to exit the program. Cleaning the milk system manually Take the milk system apart to clean it: ■■ Push the beverage outlet down completely and pull the cover forward to remove. ■■ Press the snap lever to the left of the beverage outlet downwards and pull the beverage outlet forward.

Important: Clean the milk system manually every week and, if required, also more often (see the section “Cleaning the milk system manually”).

BB Risk of burns! The beverage outlet gets very hot. After use, always let it cool down before you touch it.

Rinsing the milk system ■■ Press button E and select “Rinse milk system” with the rotary selector. ■■ Press C to start the programme. ■■ Open door and remove suction pipe from the milk tube. ■■ Wipe the suction pipe and insert the end of the suction pipe into the hole on the coffee grounds container.

■■ Remove the milk tube. Dismantle the top and bottom sections of the beverage outlet.

■■ Close the door. Be careful not to jam the milk tube. 47

Care and daily cleaning

■■ Separate the milk tubes, connecting element and suction pipe.

Clean the stainless steel milk container by hand with a mild detergent.

■■ Clean the individual parts with a detergent solution and a soft cloth. ■■ Rinse all parts with clean water and dry them.

MM All parts of the milk system can also be put in the dishwasher.

■■ Put the individual parts back together again (see also the quick reference guide).

■■ Attach the beverage outlet directly from the front firmly to the three connections. ■■ Replace the cover.

Cleaning the milk container For reasons of hygiene, the milk container should be cleaned regularly. Only the individual parts of the lid are suitable for being cleaned in the dishwasher.

M Cleaning the brewing unit (see also the Quick reference guide) In addition to the automatic cleaning programme, the brewing unit should be removed regularly for cleaning. ■■ Open the appliance door. ■■ Use the mains switch J to switch off the appliance completely. ■■ Remove the protective cover of the brewing unit. ■■ Remove the coffee grounds container. ■■ Slide the red latch on the brewing unit all the way to the left j. ■■ Press the eject lever right down. The brewing unit will be released. ■■ Take hold of the brewing unit by the recessed grips and carefully remove it. ■■ Remove the cover of the brewing unit and clean thoroughly under running water.

■■ Clean the strainer of the brewing unit thoroughly under the water jet.

■■ Thoroughly clean the connecting nozzles of the brewing unit.

LL Important: Clean it without using washing-up liquid and do not put it in the dishwasher.

■■ Clean the inside of the appliance ­thoroughly with a moist cloth, removing any coffee residues. ■■ Leave the brewing unit and the inside of the appliance to dry. ■■ Place the cover back on the brewing unit. ■■ Push the brewing unit all the way into the appliance and press on the middle until it audibly clicks into place.

FF Important: The red latch must be right over at the left at j before replacing (see diagram E).

■■ Press the eject lever right up and push the red latch right over to the right to k. ■■ Insert the coffee grounds container. ■■ Replace the protective cover. ■■ Close the appliance door.

(see also the Quick reference guide) The following messages will appear on the display at certain intervals, either “Descaling programme urgently required!” or “Cleaning programme urgently required!” or “calc’nClean programme urgently required!”. The unit should immediately be cleaned or descaled using the appropriate programme. Alternatively, the two processes Descale and Clean can be carried out together using the calc’nClean function (see the section “calc’nClean”). Failure to carry out the service programme according to the instructions may damage the appliance.

FF Important: If the appliance is not descaled when it is supposed to be, the message “Descaling programme is overdue. Device will shortly be locked.” will appear. Immediately perform the descaling process in accordance with the instructions. If the appliance is locked, it can only be operated again once the descaling process has been carried out.

To display how many beverages can still be prepared before one of the service programmes needs to be run, proceed as follows: ■■ Press button E ■■ Turn the rotary selector to select “Service info”. ■■ Touch [ Display ] to call up the information.

AA Warning! For each of the service programmes, use descaling and cleaning agents as described in the instructions and observe the (relevant) safety information. Never interrupt a service programme. Do not drink liquids! Never use vinegar, citric acid or any vinegar-based or citric acid-based agents. Never place descaling tablets or other descaling materials in the ground coffee drawer!

FF Important: Before starting each service program (Descale, Clean or calc’nClean) remove the brewing unit, clean as instructed and replace it. Be careful not to jam the milk tube when closing the door. After completion of each service programme, wipe the appliance immediately with a soft, damp cloth to remove any residues from the descaling and cleaning solution. It is possible for corrosion to form underneath such deposits. New sponge cloths may contain salts. Salts can cause rust film on stainless steel and must therefore be washed out thoroughly before use. Clean the beverage outlet, milk tubes and connecting piece thoroughly. Specially developed, suitable descaling and cleaning tablets are available from retail outlets or from customer services (see the section “Accessories”).

Descaling Takes about 21 minutes. ■■ Press button E. ■■ Turn the rotary selector to select “Descale”. ■■ Press button C. Display indicates progress of the programme. ■■ Empty drip trays and replace. ■■ Remove water filter(if there is one) and press C. ■■ Pour lukewarm water into the empty water tank up to the “0.5 l” mark and then dissolve one Siemens descaling tablet TZ80002 in it. For the TZ60002 you should always dissolve two tablets.

FF If there is not enough descaling solution in the water tank, you will be asked to do the following. Refill using uncarbonated water and press C again.

■■ Remove the suction pipe from milk container, wipe it and insert the end of the suction pipe into the hole on the coffee grounds container. ■■ Close the appliance door. ■■ Place a container with a capacity of 0.5 litre under the beverage outlet. ■■ Press button C. The ­descaling programme will now run for about 19 minutes. ■■ Remove the container and press C. ■■ Rinse the water tank and (if removed) replace the water filter. ■■ Fill the tank with fresh water up to the “max” indicator. ■■ Replace the water tank and close the door. ■■ Place the container underneath the beverage outlet again. ■■ Press button C. The descaling programme will now run for about 2 minutes and rinse the appliance. ■■ Remove the container, empty the drip trays, replace and close the appliance door. ■■ Press C. The appliance has finished descaling and is ready for use again. ■■ Press E to exit the program.

Cleaning Takes about 5 minutes. ■■ Press button E. ■■ Turn the rotary selector to select “Clean”. ■■ Press button C. Display indicates progress of the programme. ■■ Clean the beverage outlet and replace, empty the drip trays and replace. ■■ Open the ground coffee drawer, drop in a cleaning tablet and close the coffee drawer again. ■■ Close the appliance door. ■■ Place a container with a capacity of 0.5 litre under the beverage outlet. ■■ Press button C. The cleaning programme will now run for about 5 minutes.

Tips on energy saving

■■ Remove the container, empty the drip trays, replace and close the appliance door. ■■ Press C. The appliance has finished cleaning and is ready for use again. ■■ Press E to exit the program.

calc’nClean Takes about 26 minutes. calc’nClean combines the functions Descale and Clean. If both programmes are due to be carried out close together, the fully automatic coffee machine will automatically suggest this service programme. ■■ Press button E. ■■ Turn the rotary selector to select “calc’nClean”. ■■ Press button C. The display indicates the progress of the programme. ■■ Clean the beverage outlet and replace, empty the drip trays and replace. ■■ Open the ground coffee drawer, drop in a cleaning tablet and close the coffee drawer again. ■■ Remove the water filter (if there is one) and press C ■■ Pour lukewarm water into the empty water tank up to the “0.5 l” mark and then dissolve one Siemens descaling tablet TZ80002 in it. For the TZ60002 you should always dissolve two tablets.

FF If there is not enough descaling solution in the water tank, you will be asked to do the following. Refill using uncarbonated water and press C again.

■■ Remove the suction pipe from milk container, wipe it and insert the end of the suction pipe into the hole on the coffee grounds container. ■■ Close the appliance door. ■■ Place a container with a capacity of 0.5 litre under the beverage outlet. ■■ Press button C. The programme will now run for about 19 minutes.

■■ Remove the container and press C. ■■ Rinse the water tank and (if removed) replace the water filter. ■■ Fill the tank with fresh water up to the “max” indicator. ■■ Replace the water tank and close the door. ■■ Place the container underneath the beverage outlet again. ■■ Press button C. The ­programme will now run for about 7 minutes and rinse the appliance. ■■ Remove the container, empty the drip trays, replace and close the appliance door. ■■ Press C. The appliance is ­descaled, cleaned and ready for use again. ■■ Press E to exit the program.

FF Important: If any of the service programmes is ever interrupted, for instance by a power failure, please proceed according to the information on the display:

■■ Rinse the water tank and refill it with fresh water up to the “max” mark. ■■ Press button C. The ­programme will now run for about 2 minutes and rinse the appliance. ■■ Empty the drip trays, replace and close the appliance door. The appliance is ready for use again. ■■ Press E to exit the program.

Tips on energy saving

■■ Press button I to switch the appliance to “energy saving mode”. The appliances uses very little power when in “energy saving mode”, but monitors all safety-relevant functions so as to avoid damage. ■■ In the menu under “Switch off after”, set the automatic switch off period to 15 minutes.

■■ Reduce the brightness of the display and the illumination in the menu to save energy. ■■ If possible, do not interrupt the dispensing of coffee or milk froth. Stopping a process prematurely results in higher energy consumption and the drip tray fills up more quickly. ■■ Descale the appliance regularly to avoid a build-up of limescale. Limescale residues cause higher energy consumption.

To prevent frost damage during transport and storage, completely empty the ­appliance beforehand (see the section “Menu – Frost protection”).

The fully automatic coffee machine has a special accessory drawer for storing the Quick reference guide and the accessories in the appliance. ■■ Put the measuring spoon and the water filter into the accessory drawer. ■■ Put the Quick Reference Guide into the special support at the front of the ­accessory drawer. ■■ The long suction pipe can be stored in the holder on the inside of the door. ■■ The connecting element can be fixed to the magnetic holder above the ground coffee drawer.

The following accessories are available from retailers or from customer service: Accessories

Order number Retail / Customer service Cleaning tablets TZ80001 / 00311807 Descaling tablets TZ80002 / 00576693 Water filter TZ70003 / 00575491 Care set TZ80004 / 00576330 Milk container with TZ80009N / 00576166 “freshLock” lid Restrictors for 00636455 opening angle 92°

J Dispose of packaging in an environmentally-friendly manner This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE) The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU Please ask your specialist retailer about current disposal facilities

Guarantee The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased The bill of sale or receipt must be produced when making any claim under the terms of this guarantee Changes reserved

Simple troubleshooting

Simple troubleshooting Problem Strongly fluctuating coffee or milk froth quality (e.g. fluctuation in quantity or milk froth spraying). Drinks cannot be dispensed. The drink runs out at the entire outlet during dispensing. Too little milk froth, none at all, or the milk system is not taking in any milk.

The personally selected volume is not reached. Coffee dispensing slows to a trickle or stops completely.

Hot water milky or tastes of coffee. Coffee has no “crema”.

Cause Build-up of limescale in the appliance.

Solution Descale the appliance according to the instructions, see the section “Service programmes”. The suction pipe is blocked. Clean the suction pipe. Beverage outlet or one of the Clean the beverage outlet and 3 connections are blocked. the connections. Lower part of the beverage Attach the lower part, see outlet is missing. the section “Cleaning the milk system”. Build-up of limescale in the Descale the appliance accordappliance. ing to the instructions, see the section “Service programmes”. Beverage outlet or one of the Clean the beverage outlet and 3 connections are blocked. the connections. Milk not suitable for foaming. Do not use milk that has already been boiled. Use cold milk with a fat content of at least 1.5%. Beverage outlet or the milk Moisten the individual parts and tubes are not correctly put them together again. assembled. The suction pipe is blocked. Clean the suction pipe. Adjust the grinding level to a Coffee is ground too finely. Preground coffee is too fine. coarser setting. Use a coarser ground coffee. Heavy build-up of limescale in Descale the appliance accordthe appliance. ing to the instructions, see the section “Service programmes”. The brewing unit is soiled. Clean brewing unit, see chapter “Cleaning the brewing unit”. Milk tube has not been Remove the milk tube from the removed. milk container. Milk or coffee residue in the Clean the beverage outlet. beverage outlet. Unsuitable type of coffee. Use a type of coffee with a higher proportion of robusta beans. The beans are no longer Use fresh beans. fresh. The grinding level is not Adjust the grinding unit to a ­suitable for the beans. finer setting.

Simple troubleshooting

Problem Coffee is too “acidic”.

Coffee is too “bitter”.

Coffee tastes burnt.

Coffee is too “weak”.

Cause The grinding level is too coarse. Preground coffee is too coarse. Unsuitable type of coffee. Coffee is ground too finely. Preground coffee is too fine. Unsuitable type of coffee. The brewing temperature is too high. Coffee is ground too finely. Preground coffee is too fine. Unsuitable type of coffee. Coffee strength selected is too weak. Ground coffee jammed in the coffee drawer.

Ground coffee sticks in the coffee drawer.

Ground coffee sticks together.

The water filter does not stay in position in the water tank. Bean container sticks when inserting. The coffee grounds are not compact and are too wet.

The water filter is not mounted correctly.

Coffee drawer is damp.

Solution Adjust the grinding unit to a finer setting. Use a finer ground coffee. Change the type of coffee. Adjust the grinding level to a coarser setting. Use a coarser ground coffee. Change the type of coffee. Reduce the temperature, see the section “Drink adjustment”. Adjust the grinding level to a coarser setting. Use a coarser ground coffee. Change the type of coffee. Raise the strength of the coffee, see the section “Drink adjustment”. Remove the ground coffee drawer, clean and dry thoroughly. Do not press the ground coffee firmly into the coffee drawer. Remove the ground coffee drawer, clean and dry thoroughly. Firmly press the water filter straight down into the tank connection. Remove the beans.

There are beans in the housing. The grinding setting is too fine Adjust the grinding unit to a or too coarse, or not enough coarser or finer setting, or use ground coffee has been used. 2 level measuring spoons of ground coffee. Grinding level adjustment Too many beans in the grind- Dispensing a drink from coffee is stiff. beans. Only make any subseing unit. quent changes to the grinding level in small steps.

Problem Brewing unit cannot be inserted.

Protective cover of the brewing unit cannot be ­properly attached. There is water under the drip tray. Display shows “12:00” Display shows “Milk container connected?” despite connected milk container. Display shows “Overvoltage or undervoltage” Display shows “Leave device to cool” Display shows, for example: “Fault: E0510” Display shows “Fill bean container” although the container is already full, or the grinder is not grinding any beans. Display shows “Clean brewing unit”

Simple troubleshooting

Cause Brewing unit is in the wrong position.

Solution Insert the brewing unit according to the instructions, see the section “Cleaning the brewing unit”. Brewing unit is locked. Unlock the brewing unit, see the section “Cleaning the brewing unit”. Brewing unit is not locked. Lock the brewing unit, see the section “Cleaning the brewing unit”. This water is condensed. Do not insert drip tray without cover. Re-enter values; do not switch Power failure or appliance the appliance off at the mains switched off at mains. or select the “Off” option in the Clock display menu. Container is outside the range Position the container at the of the sensor. right edge. Material e.g. milk carton is not Confirm the display request recognised. with “Yes” or use the enclosed milk container. Contact electricity or grid proVoltage too high or too low. vider. Have the power supply checked by an expert. Switch off appliance for Appliance is too hot. 30 minutes. Proceed according to the The appliance has a fault. display screen. Beans are not falling into the grinding unit (beans too oily).

Gently tap the bean container. Possibly change the type of coffee. When the bean container is empty, wipe it with a dry cloth. Clean the brewing unit. Brewing unit is soiled. Too much ground coffee in the Clean the brewing unit. Do not place more than two level brewing unit. measuring spoons of ground coffee in the drawer. The mechanism of the Clean the brewing unit, see brewing unit is stiff. the section “Care and daily cleaning”.

Technical specifications

Problem Display shows “Refill with still water or remove filter ”

Cause Water tank wrongly inserted Carbonated water in the water tank. Float is stuck in the water tank. New water filter not rinsed according to instructions, or water filter used or defective. Air in the water filter.

Solution Insert water tank correctly Fill the water tank with fresh tap water. Remove the tank and clean thoroughly. Rinse the water filter according to the instructions and then switch on, or use a new water filter Dip the water filter into water until no more air bubbles escape, replace the filter. Clean and dry the drip tray thoroughly. When the appliance is switched on, remove and ­re-insert the drip tray. Clean the inside.

Drip tray is soiled and wet. Display shows “Empty drip trays” despite them being empty. Emptying is not detected when the appliance is ­switched off. Display shows Inside of appliance “Insert drip trays” even (tray holder) dirty. though drip tray in use. The coffee grounds container Push the coffee grounds ­container all the way in. is not fully inserted. Water dripped onto the Drip tray was removed too Wait a few seconds after the inner floor of the applisoon. last drink was dispensed before ance when the drip tray removing the drip tray. was removed. Display shows Leave the appliance to cool Appliance is too warm. “Please open door, down. switch off with power Dirty brewing unit. Clean the brewing unit. switch and then back on after 30 sec!” If you are unable to solve the problem, always call the hotline! You will find the telephone numbers at the back of these instructions.

Technical specifications Power connection (voltage – frequency) Heater wattage Maximum static pump pressure Maximum water tank capacity (without filter) Maximum capacity of the coffee bean container Length of power cable Dimensions (H x B x D) Weight, empty Type of grinding unit 56

220-240 V – 50/60 Hz 1600 W 19 bar 2.4 l 500 g 1.7 m 455 x 495 x 375 mm 19-20 kg Ceramic

BSH group is a Trademark Licensee of Siemens AG. Manufacturer´s Service for Siemens Home Appliances.

Lankapuhelimesta 8,28 snt/puhelu + 7 snt/min (alv 24%) Matkapuhelimesta 8,28 snt/puhelu + 17 snt/min (alv 24%)

*Calls are charged at the basic rate, please check with your telephone service provider for exact charges

BSH group is a Trademark Licensee of Siemens AG. Manufacturer´s Service for Siemens Home Appliances.

BSH group is a Trademark Licensee of Siemens AG. Manufacturer´s Service for Siemens Home Appliances.

0771 11 22 77 (local rate)

Call rates depend on the network used

Calls charged at local or mobile rate

BSH group is a Trademark Licensee of Siemens AG. Manufacturer´s Service for Siemens Home Appliances. 10/15