CHRONOS - BROCHURE - Sanitary accessories FRANKE - Free user manual and instructions

USER MANUAL CHRONOS - BROCHURE FRANKE

Franke Sissons products are covered in part or wholly by the following Approvals and Standards: on lan 1509001:2000 Ares Franke Sissons Ltd, Carrwood Road, Sheepbridge, Chesterfield S41 9QB, England Tel +44 (0)1246 450255, Fax +44 (0)1246 451276, Email ws.uk@franke.com, www.franke-sissons.co.uk, www.franke-ws.com

Dryer, Soap Dispensers CHRONOS Picture / Diagram Code / Description All dimensions in mm Hand Dryer Hand dryer for wall mounting, electronic warm air hand dryer, made of stainless steel, surface satin finished, material thickness 1.2mm, Infrared sensor activity for non-touch operation, sensor range adjustable from 100 to 300mm, cable and plug not included. Electrical data: 230V, 50Hz Total output: 2200W Heating: 2100W Motor: 100W motor with 2850rpm Blower output: 274m3/h Aïir velocity: 15.5m/s 314x175x216 ARTH310 Soap Dispenser Wall mounted liquid soap dispenser made of stainless steel with a machine pressed lid, welded body and cylinder lock with standard Franke key. The dispenser is for wall mounting and incorporate a 1 litre polyethylene container which is suitable for liquid and antiseptic soaps and lotions - satin finish. Screws and dowels are included. 200x85x130 BS618 Extras: SO1L Liquid soap 1 litre (minimum order quantity 6 pe) S010L Liquid soap in a canister, 10 litres Battery Operated Touch Free Soap Dispenser Electronic soap dispenser for wall mounting, made of stainless steel, surface satin finished, material thickness 0.8mm, cylinder lock and standard Franke key, Infrared sensor for non-touch operation, needs six standard AA 1.5 V batteries, red flashing battery indicator light, 800ml soap tank, incl. stainless steel screws and dowels. 295x140x131 CHRX625

Soap & Paper Dispensers CHRONOS Picture / Diagram [Code / Description All dimensions in mm Worktop Soap Dispenser Made of chromium plated brass and incorporates a replaceable 1 litre polyethylene container for use with liquid soap. The dispenser is for basin or counter top installations and can be filled from above if required. Installation hole diameter required is S 22mm. 9 44x85, spout 140 SD80 Extras: SO1L Liquid soap 1 litre (minimum order quantity 6 pc) So10L Liquid soap in a canister, 10 litres Paper Towel Dispenser Wall mounted paper towel dispenser made of stainless steel with a single piece deep drawn lid, welded container, stainless steel continuous piano hinge and cylinder lock with Franke standard key - satin finish. The paper towel dispenser has capacity of 500 - 800 towels depending on the type and their folding and is fitted with an anti jamming device, recommended paper: two part Z-convolution. Screws and dowels are included. 290x115x438 BS600P Folded paper tissues, one pack (= 168 pieces), available only in one box with 20 packs. Electronic Paper Towel Dispenser Electronic paper towel dispenser for wall mounting, made of stainless steel, surface satin finished, material thickness 0.8mm, deep drawn cover with cylinder lock and standard Franke key, Infrared sensor activity for non-touch operation, integrated tear-off edge, needs four standard D 1.5 V batteries, maintenance free mechanic and easy paper roll change mechanism, for rolls with max. width 210mm and max. diameter 220mm, paper length adjustable to 200, 250 and 300mm, incl. stainless steel screws and dowels. 225x290x390 CHRX630

Mirrors A heavy duty mirror made of 1.5mm thick stainless steel with a reflective polished surface and concealed theft resistant fixings. Screws and dowels are included. 400x8x300 M400HD 500x8x400 M500HD 600x8x500 M600HD A medium duty mirror made of 1.5mm thick stainless steel with a reflective polished surface. Screws and dowels are included. 500x1.5x400 CHRH501 600x1.5x500 CHRH601 Waste Bin Wall mounted waste bin made of stainless steel with standard lock, 26 litres. 360x460x170 BS605 Waste Bin Wall mounted waste bin made of stainless steel with a material thickness of 0.9mm. The container is for wall mounting and has a 24 litre capacity - satin finish. Screws and dowels and lock are included. 290x160x520 CHRX605

Waste Bins, Dispenser CHRONOS Picture / Diagram [Code / Description All dimensions in mm Waste Bin Wall mounted waste bin manufactured from stainless steel with a material thickness of 0.8mm, fully welded body, stainless steel lid with piano hinge. The container is for wall mounted and has a capacity of 30 litre - satin finish. Screws and dowels are included. 290x200x610 BS603 Waste Bin Wall mounted waste bin made of stainless steel with a deep drawn lid welded container and stainless steel continuous piano hinge - satin finish. The disposal bin incorporates a plastic container with a 3.7 litre capacity and is for the disposal of sanitary towels. Screws and dowels are included. 200x128x295 BS611V Hygienic Bag Dispenser For wall mounting, stainless steel, surface satin finished, material thickness 1.2mm, circular opening for removal of hygienic bags, comners not welded, incl. fixing material and premounted double sided self adhesive tape on the back, incl. acetone rag for surface to be cleaned. 150x92x22 HBD191

Toilet Roll Holders CHRONOS Picture / Diagram [Code / Description All dimensions in mm | Toilet Roll Holder Wall mounted toilet paper roll holder made of stainless steel, thickness 3.0mm, with a theft resistant controlled delivery spindle made of stainless steel, Franke standard lock and key, surface satin finish. The dispenser takes one roll with a maximum 9 120mm diameter. Screws and dowels are included. 150x130x100 CHRX675 Toilet Roll Holder Wall mounted toilet paper roll holder manufactured from stainless steel, thickness 3.0mm, with a theft resistant controlled delivery spindle made of stainless steel, Franke standard lock and key, surface satin finish. The dispenser takes two rolls with a maximum @ 120mm diameter each. Screws and dowels are included. 325x128x100 CHRX676 Toilet Roll Holder Wall mounted toilet paper roll holder with lid made of 0.9mm thick stainless steel; satin finished. The dispenser takes one roll with a maximum 9 130mm. Screws and dowels are included. 145x25x130 BS677

Toilet Roll Holders CHRONOS Picture / Diagram [Code / Description All dimensions in mm Toilet Roll Holder Wall mounted toilet paper roll holder made of 0.8mm thick stainless steel with a single piece pressed lid, welded container and cylinder lock with a Franke standard key - satin finish. The dispenser takes two rolls with maximum 9 115mm with the reserve roll not being visible until it is required when it drops automatically into the dispensing position. Screws and dowels are included. 140x128x295 CHRX672 Small Toilet Roll Holder Small toilet roll holder for wall mounting, made of stainless steel, material thickness 0.9mm, surface work finish, for 1 large role with max. 269mm diameter, Allan key lock, inclusive screws and dowels. 9 269x115 CHRX669 Jumbo Toilet Roll Holder Jumbo toilet roll holder for wall mounting, made of stainless steel, material thickness 0.9mm, surface work finish, for 1 large role with max. 369mm diameter, Allan key lock, inclusive screws and dowels. 9 369x108 CHRX670

Toilet Roll Holder, Soap Dishes, CHRONOS Picture / Diagram [Code / Description All dimensions in mm | Spare Part Roll Holder Spare part roll holder for wall mounting, made of stainless steel, surface satin finish. 280x81 CHRX679 for 2 rolls Soap Dish Wall mounted shelf or soap dish made of stainless steel with a deep drawn ribbed dish - satin finish. 125x90x22 BS646 with holes BS647 without holes Soap Dish Wall mounted shelf or soap dish made of stainless steel with a deep drawn ribbed dish - satin finish. Screws and dowels are included. 195x96x77 BS648

Pictograms, Hooks CHRONOS Picture / Diagram All dimensions in mm [Code / Description Pictograms Pictograms, made of stainless steel. 125x125x1.5 BS630 Gents-WC BS631 Ladies-WC BS632 Disabled-WC Coat Hook Single coat hook for wall mounting, made of chrome-nickel-steel, surface satin finished, 18mm diameter, hidden fixing screw, incl. mounting set. 9 18x60 STRX692 Double Coat Hook Double coat hook for wall mounting, chrome-nickel-steel, surface satin finished, 18mm diameter, hidden fixing screw, incl. mounting set. 9 18x60 STRX694