BV 2500 - Garden vacuum ATIKA - Free user manual and instructions

USER MANUAL BV 2500 ATIKA

Garden vac, blower, shredder

Operating Manual - Safety instructions - Spare parts

Page 16

Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here.

Keep the instructions in a safe place for future use.

Contents

Symbols machine / operating manual	9
Extent of delivery	9
Proper use	9
Residual risks	10
Safe working	10
Start-up	11
Working instructions	12
Working with the garden vac	12
Care and maintenance	13
Storage	13
Possible Problems	14
Guarantee	14
Technical data	15
Declaration of Conformity	114
Spare parts	116

Symbols machine

Carefully read operator's manual before handling the machine. Observe instructions and safety rules when operating.

Danger - objects may be thrown out at high speed when motor is running. Keep people, pets and domestic animals out of the danger area.

Shut off engine and remove power cord before performing cleaning, maintenance or repair work.

Wear eye and ear protection.

Protect against moisture.

Symbols operating manual

Threatened hazard or hazardous situation. Not observing this instruction can lead to injuries or cause damage to property.

Important information on proper handling. Not observing this instruction can lead to faults in the machine.

User information. This information helps you to use all the functions optimally.

Assembly, operation and servicing. Here you are explained exactly what to do.

Extent of delivery

After unpacking, check the contents of the box

That it is complete
Check for possible transport damage

Report any damage or missing items to your dealer, supplier or the manufacturer immediately. Complaints made at a later date will not be acknowledged.

1 preassembled unit of equipment
1 collecting bag
1 operating manual

Operating Times

Please consider the individual country specifications.

Proper use

• The garden vac/blower/shredder is only suitable for light, dry materials, such as leaves and garden waste such as grass, small twigs and pieces of paper.
• The vacuuming, blowing and shredding of heavy materials, such as metal, stones, branches, fir cones or broken glass is explicitly forbidden.
• Never use the machine in areas with harmful dust and liquids or as a wet vacuuming machine, because of the risk of physical injury.
• Any other use than for vacuuming, blowing and shredding is not allowed.
• The garden vac/blower/shredder is only designed for private use in accordance with its proper purpose.
• Regarded as machine for private gardens and allotments are those units which are not employed in public grounds, parks, sports grounds, and in agriculture and forestry.

• Every other form of use is considered improper use. The manufacturer accepts no liability for any damages resulting from improper use, and any risk is in this case borne solely by the user.

• The intended usage also includes compliance with the operating, servicing and repair conditions prescribed by the manufacturer and following the safety instructions included in the instructions.

• The relevant accident prevention regulations for the operation as well as the other generally acknowledged occupational medicine and safety rules must be complied with.
• Unauthorised modifications at the garden vac will exempt the manufacturer from any liability for damages of any kind arising from this.
• Only persons who are familiarised with the device and informed about possible risks are allowed to prepare, operate and service this device. Repair works may only be carried out by us or by a customer service agent nominated by us.
• The machine may not be used in a potentially explosive environment or be exposed to the rain.

Residual risks

! Even if used properly, residual risks can exist even if the relevant safety regulations are complied with due to the design determined by the intended purpose.

Residual risks can be minimised if the "Safety information" and the "Intended usage" as well as the whole of the operating instructions are observed.

Observing these instructions, and taking proper care, will reduce the risk of personal injury or damage to the equipment.

• Failure to observe the safety precautions can lead to injury to the operator or damage to property.
  Stones and soil may be thrown off.
• Risk from electricity, by using non-standard electrical connections.
• Touching live parts of opened electrical components.
• Impairment of hearing when working on the machine for longer periods of time without ear protection.

In addition, in spite of all the precautionary measures taken, non-obvious residual risks can still exist.

Safe working

When improperly handled a garden vac may be dangerous. If electrical tools are used, the fundamental safety precautions must be met to preclude the risks of fire, electric shock and injuries to persons.

Before commissioning this product, read and keep to the following advice. Also observe the preventive regulations of your professional association and the safety provisions applicable in the respective country, in order to protect yourself and others from possible injury.

Pass the safety instructions on to all persons who work with the machine.
i Keep these safety instructions in a safe place.

• Make yourself familiar with the equipment before using it, by reading and understanding the operating instructions.
• Do not use the machine for unsuitable purposes (see "Normal intended use" and "Working with the vacuum cleaner").
• Ensure that you have stand in a secure standing position and maintain your balance at all times. Do not bend forwards.

• Be observant. Attend to what you do. Start working with rationality. Do not use the device when you are tired or under the influence of drugs, alcohol or medicaments. One moment of carelessness when using the device can result in serious injuries.

• Wear suitable work clothes:

• do not wear loose-fitting clothes or jewellery; they can catch in moving parts.
  Gloves and nonskid footwear

• Trousers to protect the legs

• Wear protective clothing:

• safety goggles
  ear protection (Sound intensity level at workplace can exceed 85 dB (A))

• Within his area of work the operator is responsible for third parties.

• Children and youngsters less than 16 years of age and people who have not read the operating manual must not operate the machine.
• Keep children away from machine.
• Never operate the machine if other persons are in the immediate vicinity.
• The user is responsible for accidents with other people or their property.
• Never leave the saw unattended.
• Do not overload the machine! You work better and safer in the given performance range.
• Only operate the machine with complete and correctly attached safety equipment and do not alter anything on the machine that could impair the safety.
• Faulty or damaged parts in the device must be replaced immediately.
• Do not spray machine with water (this is hazardous due to live components).

• Switch the machine off and remove the mains plug from the socket when

• carrying out repair works

• carrying out servicing and repair works, removal of faults

• checking the leads to see whether these are caught up or damaged

• changing over from vacuuming to blowing
• transporting
• leaving unattended (even during short interruptions)
• unusual noises and vibrations

Thoroughly maintain your garden vac:

• Make sure that the ventilation apertures are free.
• Keep handles dry and free of oils and grease.

• Follow the maintenance instructions and the instructions for spool exchange.

• Check the machine for possible damage

• Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function

• Check whether the parts are damaged. All parts must be correctly installed and fulfil all conditions to ensure perfect operation of the saw
• Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use.

• Damaged or illegible safety warning labels should be replaced immediately.

• Store the unused machine in a dry locked place away from the reach of children.

Electrical safety

• Design of the connection cable according to IEC 60245 (H 07 RN-F) with a core cross-profile section of at least

3 x 1.5 mm² for cable lengths up to 25m
3 x 2.5 mm² for cable lengths over 25m

• Longer power supply cables will cause a drop in voltage. The motor will not be able to provide its maximum performance and the operation of the machine will be impaired.
• The coupling in the connection lead must be splashproof.
• When laying the connecting attachments, be sure that they do get crushed or bent, and that the plug-and-socket connection does not get wet.
• Do not use the cable for purposes for which it is not meant. Protect the cable against heat, oil and sharp edges. Do not use the cable to pull the plug from the socket.
• Regularly check the extension cables and replace them if they are damaged.
• Do not use any defective connection cables.
• When working outdoors, only use extension cables especially approved and appropriately labelled for outdoor use.
• Do not set up any provisional electrical connections.
• Never bypass protective devices or deactivate them.
• Only hook up the machine by means of a fault-current circuit breaker (30 mA).

The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or one of our customer service points. Local regulations - especially regarding protective measures - must be observed.
Repairs to other parts of the machine must be carried out by the manufacturer or one of his customer service points.

Use only original spare parts. Accidents can arise for the user through the use of other spare parts. The manufacturer is not liable for any damage or injury resulting from such action.

Start-up

• Check that the machine is completely and correctly assembled.
• Before using the shredder, make sure each time that there are no faulty connections (tears, cuts, etc.)
• there are no damage at the machine
  all screws are tight
• check the hydraulic system for any possible leaks

Mains connection

• Compare the voltage given on the machine model plate e.g. 230 ~V with the mains voltage and connect the machine to the relevant and properly earthed plug.
• Only use connection cables with sufficient diameters.
• Do not use any defective connection cables.
• Connect the machine via a 30mA fault current safety switch.

Fuse protection: 10 A

Mounting of the extension cable

1. Plug the female connector of the extension cable on the male connector of the switch-connector combination.
2. Thread the extension cable through the pull relief device as a loop and hang it up.
3. Make sure that the extension cable has enough free motion.

Switch on

Do not use any device where the switch can not be switched on and off. Damaged switches must be repaired or replaced immediately by the customer service.

Working instructions

Before commencing work, ensure the following:

• The machine may only be operated by persons over the age of 16 years, and who have read and understood these operating instructions.
• Wear your safety gear (goggles/vizor, gloves) for protection from possible injuries.

• Make sure to have a safe and tidied up work area. Remove from the working area objects which might be thrown off.
  Before starting your work make sure that:

• no other persons or animals stay within the working area,
  you can always step back without any barriers,
  you have always a secure standing position.

• Never aim the suction/blowing pipe at people or animals. Never blow objects in the direction of people of animals.

• Spectators must observe safety clearance of min. 5 m.
• Beware of swirling and flying objects. Be particularly aware of recoiling effects from brickwork or house walls (e.g. stones).
• Do not operate the machine with wet hands or during damp weather.
• Always ensure that the connection lead runs back away from the machine. Otherwise there is a risk of stumbling, slipping or falling.
• Never use the machine

without the bag,

• without closing the zip fastener of the bag

Always keep the ventilation apertures free.

If persons who have blood circulation problems are too often exposed to vibrations damages to the nervous system or to blood vessels may occur.

You can reduce vibrations

• by thick and warm working gloves,
• shorter working time (have longer breaks).

See a doctor if your fingers swell, you don't feel well or your fingers become numb.

Switching on/off

Before using the machine, ensure that the bag has been fitted, is not damaged or worn and the zip fastener has been closed.

Instructions for using as vac/shredder

1. Move the changeover switch to the vac/shredding setting.

2. Hold the machine firmly at the handle and place the belt over your shoulder. Adjust the belt so that the machine can be carried comfortably and safely.

3. Switch the machine on.

4. Move the machine slowly and evenly over the material. Do not press it into the leaves.
5. The suction power decreases when the bag is full. Switch the machine off and disconnect from the mains. Open the zip fastener and empty the bag.
6. After finishing work, move the changeover switch to the blowing setting to remove any remains from the suction/blowing pipe.

Take up leaves in good time! - It is advisable to take up fallen leaves when the weather is dry and as soon as they have fallen. Wet leaves are a problem, together with leaves that have already begun to rot or are on big piles.

Instructions for use as blower

1. Move the changeover switch to the blowing setting.
2. Hold the machine firmly at the handle and place the belt over your shoulder.

Adjust the belt so that the machine can be carried comfortably and safely.

1. Switch the machine on.
2. Move the suction/blowing pipe in generous swaying movements uniformly a few centimetres over the ground, moving from one side to the other.

Garden vac with speed control

This version has adjustable motor speed and therefore adjustable vacuuming and blowing.

The speed is fully variable from 6000 rpm to 13000 rpm.

Working with the garden vac

What can I vacuum and blow?

YES

light, dry materials, e.g. dry leaves and garden waste such as grass, small twigs and pieces of paper

NO

heavy materials such as metal, stones, branches, fir cones or broken glass

Do not use the machine to vacuum or blow any burning, explosive or smoking items such as cigarettes, matches or hot ash.
Do not vacuum or blow any liquids, in particular flammable liquids such as fuel. Do not use the machine in the vicinity of such substances.

Care and maintenance

Before each maintenance and cleaning work :

• switch off device
• wait until the cutting thread is stationary.
• pull out main plug

For maintaining and cleaning, removed security devices must unconditionally be mounted properly and proved again.

Use only original parts. Other parts can result in unexpected damages and injuries.

Maintenance and repair work beyond this is only allowed to be carried out by the manufacturer or authorized service staff.

Please proceed as follows to preserve the functioning ability of your garden vac.

• Clean all movable parts on a regular basis.
• Remove dust and dirt with a cloth or a brush.
• Do not clean the machine with running water or high-pressure cleaners.
• Do not use solvents for the synthetic parts (petrol, alcohol, etc.) as these can damage the synthetic parts.

Cleaning the bag

Empty the bag every time after it has been used.

1. Shake the bag thoroughly.
2. Turn it inside out and brush the bag out thoroughly.
3. Wash the bag when extremely soiled or at least once a year, by hand in mild soap suds.

If the zip fastener is stiff, rub dry soap into the zip.

For your own safety, regularly check the bag for any signs of damage. Always replace a damaged bag immediately.

Storage

Remove the mains plug from the socket.

• Store unused equipment in a dry, locked place out of the reach of children.

• Place the protective cap (19) onto the thread knife (20).
  Before a longer storage observe the following in order to prolongate the service life of the machine and to guarantee a smooth running operation:

• thoroughly clean the machine

Possible problems

Problem	possible cause	remedy
Motor won't start	⇒No mains power (power failure)⇒Connection lead defect⇒Motor or switch defect	⇒Check fuse (10 A)⇒Replace lead or have lead checked (electrician)Never use defect lead⇒To solve the problem, contact the manufacturer or an authorised company (see customer service list)
Material is not sucked in properly (reduced vacuuming power)	⇒Machine is clogged or blocked⇒Bag too full⇒Speed setting too low (only for garden vacs with fully variable speed control)⇒Extension cable too long, or cross-section too small. Socket too far away from main connection, and cross-section of connection lead too small.	⇒Empty bag⇒Adjust to higher speed⇒Extension cable at least 1,5 mm2, maximum 25 m long. Cross-section of at least 2,5 mm2in longer cables.

Guarantee

• The machine is guaranteed for a period of 2 years from the date of purchase/delivery against faults due to material or manufacturing errors.
• The guarantee is rendered invalid in the event of any damage caused due to improper use or handling, improper packaging when returning the machine or failure to observe the operating instructions.
• Faulty parts must be returned to our works carriage-paid. The decision on free replacement of faulty parts will be made at our discretion.
• The guarantee does not cover normal wear of the shredder turbine and bag.
  Any guarantee work will be carried out by the manufacturer. Our express approval must be obtained before having any such work carried out by another company.
• The guarantee only remains valid provided that original replacement parts are used.
• All plastic parts are marked for pure grade recycling. Please contact the manufacturer for recycling machines which can no longer be used. The manufacturer will inform you of the current recycling costs.
• We reserve the right to make technical changes in the course of technical progress.

Technical data

Model	2100	2200	2300	2400	2500
Motor power P1	2100 W	2200 W	2300 W	2400 W	2500 W
Motor	AC-motor 230 V ~ 50 Hz
Speed n without speed control	13000 min-1
Speed n with speed control	6000 – 13000 min-1
Blowing air flow (max. air velocity)	270 km/h
Suction power (max. air flow)	840 m3/h
Hand arm vibration (as per EN 1033/DIN 45675)	avhw = < 2,5 m/s2
Bag (volume)	35 / 45 Liter
Weight	4,4 kg
Sound power level LWA (as per 2000/14/EG)	measured sound pressure level 100 dB (A) guaranteed sound pressure level 101 dB (A)
Sound pressure level LPA (as per 2000/14/EG)	80 dB (A)

I Iotpe6JIeHne Toka I: 10 A

IopKJIIOUeHne ydINHITeNbHoro Ka6eJra

1. Bctabbte MyfTy ydInHtBnHO ka6eJy B wTekep 6Ioka BblKnOuTaB- wTekep.
   2.CloXnB neTneuHnHTeHbI KabeIb, npocHyTe erO uepe3 npncnoc6JIeHne IJpa3rpy3Kn Ka6eIa OT cIN TjXeHnI NOBcBte YdHnHtEJIbHbI Ka6eIb.

3.CneIte 3a TEM, YTO6bl yDINHITeJIbHbIKa6eJIb IMeI IOCTaOHTyIIOPT.

BkJIIOUeHne

3aIpeuaeTcNcIOJIb3OBA Tb CTaHOK, BbIKNoUaTeJIb KOTOPOro He BKIOUaETCr N He BbIKIOUaETCr NobpeXdEHbIe BbIKIOUaTeI NdoJXhbl He3aMeIITteBHO peMOHTnPOBaTbcr NII 3aMeHrTbcr cepBucHO cnyKboi.

pa6oyme yka3aHnra

Дя МAKCIMaJIbHO BO3MOxHOrO CHIXKeHnЯ риcka Пolyчehня Травм Heo6xOdImO NepeД Haayalom pa6ot ВылOLHHTb CNeIyUOuNe yKa3aHnЯ ПОТХнke Бe3OpaNCHocTn:

3a npeucaetc BBOINTb HAcTOnuN CTaHOK B 3KcPnPyatauNo Do Tex Nop, Noka He npOHTaHa HAcTOnuJa INCTpyKUPO EKCpNPyatauN, He CO6JIHOeHbI BCE pRnBeDeHHbIe yKa3aHnI N CTAHOK He CMOHTnPoBaH B COOTBETCTBnC OINSCAHnEM!
- Y6paHNo IIN pa6ooye MeCTo? YdaIInTe I3 pa6ooye 3OhbI npEIMeTbI, KOTOpBle MOrYt 6bITb OTbPOwHeBIs aNnapaTOM.
- Перах началов pa60ы удостоверьтсь в том, уTO: -В рбочи зоне.net Дугх Людени ИлижИВOTьx -y Bac ectb ectb BO3MOЖHOCtь 6ecпряТCTBEнHO OToITn Ha3aI -y Bac obecne�но надекхhoe CToryee NOLOKhene.
Bcerda coepknte BeHTnJIaHNoHHbIe IeJIu B YnCTOM COCTOHN

Bn6paunIO moXHO yMeHbIHTb.

TOJCTbIMTteJIbIMpa6OuIMpyKaBUNaM

3a cuet yctpoiCTBa YactbIX dIINTEJhBIX nepepbIBOB. Ecnn Baun panbci OTeKNI, Bby CyBCTByeTe HeDOMORAHe nn panbci IOTepraII NcYBCTBHTelbHocTb, o6paNTecb K Brpuy.

BkJIoucheHne / BbIKJIoucheHne

HnkOrda He 3KcPnyaTnpyIte yCtpoiCTBO 6e3 npnemHoro MeuKa, C He3aCTeRHyTbIM 3aMKOM "MOHnei" npnemHoro MeuKa.

Yka3aHnI NO NcNoJIb3OBAHnIO MExaHn3Ma B KaueCTBe IHeBMaTHuYeCKOrO c6OpHnKa n H3MeJIbUHTeJIa

1. ПocTаБТe песключateЛь B пОLOжЕнe c6opa- иЗМeЛьЧЕнЯ.
2. Kpenko B3aB yctpoiCTBO 3a pyky, Hadehbe Tnpeyo peMeHb DnA HOseHn HOseHn TaKIM O6pa3OM, Yn HadexHoe HOseHne yctpoi
3. BключITE yctpoiCTBO.
4. Медлесно и равноррно вори te yctpoiCTBOM haCo6npaembIM mATEpnaJOM. He BxKMaTe yctpoiCTBO BJIUCTBY.
5. Пюизводптельноctь BCасьИВаня yMeиьшаETСЕ, ecnnpiemнь MeшOK Hanonнен. БыклочITE yCTpoIcTBO n3BJIeKInTe CTeByIO StTeNCEЛьHyO BUNKy n3 PO3eTKn.PacCTerHNTe 3aMOK "MOJHHO" n ONOPOXHNTe npiemнь MeшOK.

Iocne BbINOJIHeHnpa6oT NOCTaBTe nepeKJIIOUaTeJIb B IIOJoxeHnpe pa3dYBaHn, yTO6bl YdaJIntb OCTaTKN N3 BCacbIBaIOSei/DyTbeBOI Tpy6bl.

CBoeBpeMeHNo npOn3BOJnTe noD6op JnCTBbl! - PeKomeHdyETcra cObpaTb JnCTBy nO BO3MOXHOCTn B cyxuO nOrOy n KAK MOxHO cKopee nocJe JnCTOnaJa. Y6npaTb MOKpyo JnCTBy 3aTpYdHNTEJIbHo. To Xe OTHCNTcN K JInCTbMy, yXe HaxOJaUIMcR B IpoUcCE pa3IIOXKeHn NnIc Bo6paHHbIM B 6OJIbUne KyuN.

Yka3aHnI NO IcNoIb3OHNIO yCTPOiCTBa B KaueCTBe pa3dYBaTeJIa

1. NocTaBbTe nepeKJIouaTeJIb B nIoJxHeIe pa3dYBaHnI.
   2.Kpenko B3aB yctpoiCTBO 3a pyky,HaedeHbTe Ha pIneyo peMeHb dIy HOseHn. OtperynpuYte peMeHb IJn HOseHn TAKM O6pa3OM, YTO6bl ObecneuBaIocb ydo6hoe HAdexHoe HOseHne yctpoiCTBa.

1. MeIeHNO npabHomepHo nepemaeaTe BCaCbIBaHouyO/DyTbeBy Tpy6y Ha BblrHyToi pyKe C OJHO CTOpOHbI B DpyTuB HecKoJIbKIn CaHTmEtpax OT 3eMnI.

TO MOxHO uTO HeIb3a Co6npaTb npa3dyBaTb?

MOXXHO

JerKne n cyxne MaTePnaIbI, HApPImeP, CyXyIO JInCTBy n pactnteJIbHbIe OTXoIbI caIOBOdCTBa: TpaBv, He6OJIbShne BETKn I KIOUcK bymar

HENb3a

TaeJIbe MaTePnaJIbI, HApnIMep, MeTaJI, KAMHIn, CybJa, eNoBbie WnUKN NIN 6NTOE CTeKJIO

3anpeaetc co6npaTb nI npa3dyBaTb c NOMOuDahHoro yctpOCTBa ropAunie, B3pbIOoNacHbIe nIITAKne TJIeOUnie npedMeTbI, KAc CNrapeTbI, CnUKN IINrOpayu 30Jy.

3anpeaetcobnpaBn pa3dyBaTb XndKoCTN, BOC6eHHocTn Takne BOCnIaMeHraUoIuec, KaK 6eH3nH.

Takke 3anpeucaetcnaIOJIb3OBaTB yCTpoIcTBO B6n3n TaKIX MaTePnaIOB.

TexobcnyxmbaHne n oucnTk

IpepeBCEmN abotamn no texHneckomy 06cnyxmbaHIO uOChTke Heo6xoDIMO:

• BbIKJIIOUHTb CTAHOK
  -Дохдатбс оctановский ржушенн.
  -BbItauntb CeTeBOu WTeKepe

3aunthbIe yctpoCTBa, ydaJIeHHbIe IJnI npOBedeHn texhueckoro 6cbnykmbAHn N OcNCTKn, Heo6xoJIMO 6o3aTeJIbHO BHO BVObb yCTaHaBJIbBaTb HaJIeXaUm 6pa3OM n KOHTPOINPOBaTb.

Pa3pe7aetcI NCNoB30BaTb TOJbKO opuHaJIbHbIe 3aIpaCTn. DpyrHe DeTaJIIM MOryT 6bITb npUHOn HnepeDcKa3yEmbIX NOBpeXdEHN I TpaBM.

Bce npyrne pa60tI no Texnueckomy 6cJyXbAHnIO nOuHCTKe, KpOME ONncAHbIX B HAcTOrIeM pa3JeIe, pa3pe7aetCByIINHrTb TOJIbKO I3rTOBNTeJIHO INI npMam, KOtOpBIE IM yNOJHMOUeHbl.

XpaHntb HEnCNoJIb3OBAHHbIe yCTpoIcTba B CyXOM MecTe, 3aMbIkaemOM Ha KJIIOU N HeIOCTyINOM dJa DeTei.

Дл coхраеня pa60tocno6hoctn Пневматческ n c6opнн Heo6xoJMo co6HIOdA t b cIeDyUOuNe npaBnla.

Perylnpno YnCTb BCE Bpaauoueeae TaJIN.
- YdaJIyIe nbIb n 3aIrp3HeHncaIcpETKo IIN KICTOUKOJ.
He nCnoIb3yIte InIyNCTKIMaIINHbIBODoIPOBODHyOBODYnn annapat IIn OChCTKNIOB BbICOKMdABJIeHNEM.
He noIb3yIeTcB pactBOpITeJIaMn (6eH3HOM, cIInpTOM n T.D.) OUnCTK INactMaCCOBbIX DeTaJIeN, pactBOpITeJI MOrYT NOBpeINt b IX.

XpaHeHne

BbItaunTb ceTeBOI wTeKepe.

XpaHntb HeNCnOJIb3OBaHHbIe yCTpoNCTBa B cyXOM MecTe, 3amblKaemOM Ha KJIouY HNeOCTyINHom dJa DeTei.
YCTaHOBtB 3aIHTHoe npncnOco6JIeHne Ha HHTOCHbI HOK.
- IpeepdIINTeBbIM XpaHeHnEM Heo6xOaMBO ueJX npoIeHnCpoka cnyk6bl n ObecneueHn JERKocTn XoJa npu O6cnykBaHn:

• npOBecTn TtuaTeIbHyIO OUnCTKy.

Bo3MOxHbIe HeNCnPaBHOCTN