Compact 1 - Speaker Acoustic Energy - Free user manual and instructions

Product type	Two-way bookshelf loudspeaker
Brand	Acoustic Energy
Model	Compact 1
Tweeter driver	28 mm fabric dome
Mid/Bass driver	100 mm paper cone
Power handling	100 W RMS
Frequency response	65 Hz - 28 kHz (±3 dB)
Sensitivity	88 dB/W
Impedance	8 ohms (6 ohms minimum)
Cabinet material	18 mm MDF with internal bracing
Port design	Rear-firing low turbulence reflex port
Dimensions (H x W x D)	220 x 150 x 200 mm
Weight per speaker	3.2 kg
Finish options	High gloss piano black, Vermont walnut vinyl
Mounting options	Wall bracket supplied, stand or shelf placement
Accessories included	Foam bungs, rubber feet, wall brackets
Warranty	3 years
Recommended use	Stereo hi-fi, home cinema surround

Frequently Asked Questions - Compact 1 Acoustic Energy

How should I position the Compact 1 speakers for best sound?

Place the speakers so the tweeters are at ear level when seated. Keep them 6 to 18 inches from the rear wall and ideally equidistant from each other as to the listening position. Remove the grilles for critical listening and use the supplied foam bungs if the speakers must be close to walls or corners.

Can I wall-mount the Compact 1 speakers?

Yes, the wall bracket is supplied with the speakers. Ensure the bracket is securely fixed to a wall capable of supporting the weight. You can also place the speakers on a dedicated stand or shelf using the provided rubber discs for coupling.

What amplifier power is recommended for the Compact 1?

The Compact 1 handles 100 W RMS and has a sensitivity of 88 dB/W. A typical hi-fi amplifier delivering between 10 and 100 watts per channel into 8 ohms is well suited.

How do I connect the speakers to my amplifier?

Switch off the amplifier first. Connect the positive terminal (red) on the amp to the red terminal on the speaker, and the negative terminal (black) to the black terminal. After wiring, turn the volume down, power on, and gradually increase to the desired level.

What finishes are available for the Compact 1?

The Compact 1 is available in high gloss piano black or Vermont walnut vinyl. The real-wood veneer or high-gloss finish is designed to blend into modern interiors.

How should I clean and maintain the Compact 1?

Use a soft, dry cloth to wipe the cabinet. Avoid solvent-based cleaners and abrasive materials. Do not expose the speakers to direct sunlight or excessive humidity to prevent damage to the finish.

What is the warranty period for the Compact 1?

Acoustic Energy provides a 3-year warranty against original defects in materials and workmanship from the date of purchase. Retain your purchase receipt and contact your dealer for warranty claims.

Can I use the Compact 1 for home theater?

Yes, the Compact 1 is ideal for stereo and home cinema applications. Its compact size makes it easy to integrate as front, center, or surround speakers in a small to medium room.

What are the exact dimensions and weight of the Compact 1?

Each speaker measures 220 x 150 x 200 mm (H x W x D) and weighs 3.2 kg.

Why should I use the foam bungs in the rear ports?

The foam bungs are supplied to tune the bass output. If the speakers are placed close to a rear wall, in corners, or on a bookshelf, inserting them reduces port airflow and prevents the bass from becoming boomy.

USER MANUAL Compact 1 Acoustic Energy

(AE)

ACOUSTIC ENERGY

COMPACT-1

OWNERS MANUAL

Introduction

Congratulations on choosing the Acoustic Energy Compact 1 - a high-power, ultra-compact two-way loudspeaker capable of outstanding audio performance.

With its neutral character, exceptional power handling and low distortion, the Compact 1 is suitable for many rooms and systems alike. Flexible with positioning, the Compact 1 speakers are happy to be installed on dedicated stands, wall mounted (with supplied bracket) or placed on a shelf or unit.

Finished in real-wood veneer or high gloss black, the Compact 1 is designed to fit into the modern home environment with minimal visual impact or fuss. Smart and elegant, the Compact 1

Positioning

The Compact 1's are very flexible with regard to positioning and are designed to work well wherever they are located within the listening environment. There are however some basic guidelines that should be followed (where possible) for optimum performance:

The tweeters (high frequency drivers) should ideally be at ear level when the listener is seated and for serious listening the grilles are best removed where practical.

Rigid support is necessary for the speakers to deliver optimum dynamic response and detail, the rubber dics provided should also be used on the bottom of the speaker enclosures to ensure good coupling with the surface on which they are mounted (4 per speaker, one towards each corner).

Room positioning: The Compact 1's work best between 6"-18" from the rear wall, ideally the same distance from each other as they are from the listening position. If using them closer to the wall, corners or on a shelf/bookcase it may be preferable to use the foam bungs supplied in the rear ports to avoid the bass becoming "boomy".

Experiment and listen to what works best for you, trust your own ears and judgement.

Connection

Check that your amplifier is switched off before installing your loudspeakers. Failure to do so may result in speaker or amplifier damage.

The positive cable from the amplifier positive (or red) terminal should connect with the positive (red) terminal on the loudspeaker. Similarly the negative cable should connect the amplifier negative terminal (black) to the negative terminal (black) on the loudspeaker.

After wiring up, lower the volume to the minimum, switch on the amplifier, select the signal source and then raise the volume to the listening level required.

(diagram for illustration purposes only)

Specifications

Tweeter: 28mm Fabric Dome

Mid/Bass Driver: 100mm Paper Cone

Power Handling: 100 Watts RMS (continuous undistorted input)

Frq Response: 65Hz-28kHz (+/- 3dB)

Sensitivity: 88 dB/W

Impedance: 8 ohm (6 ohm minimum)

Cabinet: Multiple brace, pressure loaded 18mm MDF with rear-firing low turbulence reflex port

Weight: 3.2kg per speaker

Dimensions: 220 x 150 x 200mm (H/W/D)

Finish: High gloss piano black or Vermont walnut vinyl

Warranty

Your Acoustic Energy Compact 1 loudspeakers are guaranteed against original defects in materials, manufacture and workmanship for 3 years from the date of Purchase. Please retain all original packaging materials for possible future use.

We suggest that you complete the details of purchase now and keep this information in a safe place for future reference.

Under this warranty Acoustic Energy agrees to repair any defect or, at the company's discretion, replace the faulty component(s) without charge for parts or labour. This warranty does not imply any acceptance by Acoustic Energy or its agents for consequential loss or damage and specifically excludes fair wear and tear, accident, misuse or unauthorised modification.

This warranty is applicable in the United Kingdom only and does not in any way limit the customer's legal rights. Claims and enquiries under the warranty for AE products purchased outside the UK should be addressed to the local importers or distributors.

If you have reason to claim under the warranty please contact your dealer in the first instance.

Dealer's name: ....

Date of purchase: ....

Serial numbers: ....

ACOUSTIC ENERGY LTD

16 Bridge Road,

Cirencester,

Gloucestershire,

GL7 1NJ

Tel: [phone]

Fax: [phone]

Email: [e-mail]