AE29-06C - Bluetooth speaker Acoustic Energy - Free user manual and instructions

Product Type	Active Bluetooth Speaker System
Brand	Acoustic Energy
Model	AE29-06C
Power Output	2 x 10 W RMS
Drive Units	Full range, woven glass, low distortion
Frequency Response (±3 dB)	70 Hz - 18 kHz
Bluetooth Version	V1.2
Bluetooth Profile	A2DP
Wireless Range	Up to 10 m (open field)
Speaker Impedance	8 Ohms
Dimensions (W x H x D)	387 x 155 x 130 mm
Weight	2.25 kg
Power Source	Mains adapter (AC)
Standby Mode	LED blinks green; auto standby after 10 minutes
Pairing Passcode	8888
Auxiliary Input	3.5 mm mini jack (rear)
Controls	Large silver knob (power/volume), Multi-Function Button (MFB)
LED Indicators	Green (power), red/green flashing (pairing), orange (abnormal)
Speaker Separation	Detachable speakers from amplifier unit for flexible placement
Cable Management	Built-in cable unwinds from the rear of each speaker
Maintenance	Clean with a soft dry cloth; avoid moisture and solvents
Safety Compliance	Recyclable per WEEE directive; do not dispose of as household waste
Spare Parts & Repair	Contact Acoustic Energy or an authorized service center
Included Components	2 satellite speakers, amplifier unit, mains adapter, user manual

Frequently Asked Questions - AE29-06C Acoustic Energy

How do I pair my Bluetooth device with the AE29-06C?

To pair for the first time, turn on the speaker by rotating the large silver knob. Then press and hold the Multi-Function Button (MFB) for about 8 seconds until the LED flashes red and green. On your device, search for the "Acoustic Energy AE29-06C" in Bluetooth settings and select it. When prompted, enter the passcode 8888. The LED will blink 5 times to confirm a successful connection.

Can I connect a wired audio source to the AE29-06C?

Yes, plug a 3.5 mm audio cable into the mini jack input on the rear of the amplifier unit. Use the volume knob to adjust the level. Note that connecting a wired source automatically disconnects any Bluetooth device; remove the jack to re-enable Bluetooth.

Why is my AE29-06C not entering pairing mode?

Ensure the speaker is in standby mode (LED blinking green slowly). Then press and hold the MFB for 8 seconds until the LED flashes red and green. If this doesn't work, check that the speaker is powered and not already connected to a Bluetooth source. If an issue persists, try restarting the speaker.

How do I switch back to Bluetooth after using a wired connection?

Simply remove the 3.5 mm mini jack from the rear input. The system will automatically return to Bluetooth mode and reconnect to the last paired device. If it doesn't, you may need to press the MFB to reconnect.

What does a steady orange LED mean?

A steady orange LED indicates an abnormal standby condition, such as overheating or a connection fault. Turn off the speaker, unplug it for a few minutes, then power it back on. If the issue persists, contact Acoustic Energy support.

Can I separate the two speakers for a better stereo image?

Yes, the satellite speakers can be detached from the amplifier unit. Hold the speaker and slide it away from the amplifier. The connecting cable will unwind. This allows you to place the speakers up to 1 meter apart (the cable length) for improved stereo separation and soundstage.

How do I turn on the AE29-06C?

Connect the mains adapter and rotate the large silver knob on the front to the on position. The LED will show a steady green light for 3 seconds, then blink green slowly, indicating it's in standby mode ready to pair or play.

How do I reset the AE29-06C to factory settings?

There is no dedicated reset button. To clear all paired devices, press and hold the MFB in standby mode for about 10 seconds until the LED flashes quickly. This will delete the pairing list. You may need to enter pairing mode again to connect your device with passcode 8888.

What is the ideal placement for the AE29-06C?

Place the speakers on a stable, level surface, at ear height if possible. Keep the amplifier unit within 10 meters of your Bluetooth source for reliable connectivity. Avoid placing the speakers near metal objects or thick walls that can block the signal.

How should I clean and maintain the AE29-06C?

Wipe the exterior with a soft, dry cloth to remove dust. Do not use water, abrasive cleaners, or solvents. Ensure all cables are disconnected before cleaning. The woven glass driver can be gently dusted with a soft brush. Do not expose the speaker to excessive moisture or direct sunlight.

USER MANUAL AE29-06C Acoustic Energy

1. to communicate the sizeo Bluetooth device that was last used. press the MFB once when in standby mode.
2. To play a hard wired source such as a digital music (MPS etc) player, simply communicate the source in to the mini jack converter or the rear of the unit and adjust the volume knob until it's at the level you want. Please note that this will disconnect the Bluetooth device and the mini-jack will have to be removed to turn to Bluetooth connection!
   e. This can be repeated if you would like to pair with an alternative device at any time.

d. Once you have successfully paired the speakers and your device, the LED will blink 5 times.

c. Enter the pass-code, which is 8888.

found it: see your devices (e.g. manual for more detail on this.

on your Bluetooth device and pair with it once you've

b. Search for the Stereo Bluetooth Speaker system

a. Hold down the MFB for approximately 8 seconds until the LED flashes red/green.

1. To connect an A2DP stereo Bluetooth device for the first time:

2. Turn on via the large silver knob on front – The LED light should flash green slowly, showing that the unit is in standby mode.

the speakers forward.

1. Separate the speakers from the amplifier unit if required - the capable simply unwinds from the back of the speakers. The speakers can be disconnected from the amplifier unit by holding it and sliding

2. Plug in the mains adapter.

Products that depict the crossed-out wheeled bin logo cannot be disposed of as domestic waste but must be taken to a facility capable of recycling them and appropriately handling any waste by-products. Contact your local authority for details of the nearest tech facility.

Product Name	Size: Bluetooth Speaker
Model Number	AE92-06C
Type	Size: Active Bluetooth Speaker System
Power Output	2 x 10 W
Drive Unit	Full range, low distraction, woven glass
Frequency response +/−3dB	7kHz - 18kHz
Dimensions	387 x 155 x 130
Wagon	2.25KG
Bluetooth Standard	V1.2
Bluetooth A2DP Profile	For completely with Bluetooth audio devices for perm stereo audio steering
Thermostical range in open field	1m
Antenna	Internal
Speaker Impedance	8 Ohms

Item	Action	LED Status	Note
Power On	Connect power & turn inputs	Steady Green (for 3 cars)
Standby	Brenn Green	Systan will win with the second added AFR decade last connected AFR decade submanned within 10 minutes
Standby (abnormal) des<|im_start|> Greenland (abnormal) desombronate(ton)	Steady Orange (for 3 cars) submanned within 10 minutes
Paring	in standby mode, press and hold the MFB for 5 seconds	Brenn Green & Red
Period	Brenk Green	Brenk Change mmeas, the system was first standing mode (5 seconds radiay)
Exx Pairing	in parking mode, press and hold MFB for 6 seconds
First row with standby mode	Brenk Green	If moving parts within 2 seconds	This will decrease from building module
Handwired Mode	Plug source not multi-let connector on rear unit	Benz Green	This will decrease from building module

How to use your Stereo Bluetooth Speakers

如何使用您的立体声蓝牙音箱

in our size the institution and the leadership has some scope.