UPVH880GJMG - Tumble dryer GE - Free user manual and instructions
Find the device manual for free UPVH880GJMG GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | GE |
| Model | UPVH880GJMG |
| Product type | Heat pump dryer without venting |
| Drying capacity | 9 kg |
| Energy class | A++ |
| Annual consumption | 176 kWh |
| Power supply | 220-240 V ~ 50 Hz |
| Connected load | 700 W |
| Dimensions (H x W x D) | 84.5 x 59.6 x 60.3 cm |
| Net weight | 45 kg |
| Noise level | 65 dB(A) |
| Drying programs | Cotton, Synthetics, Delicates, Wool, Shirts, Jeans, Anti-allergy |
| Humidity sensor | Yes |
| Delayed start | Yes |
| Steam drying | Refreshing steam function |
| Display | Digital LED display |
| Child lock | Yes |
| Overheat protection | Yes |
| Maintenance | Cleaning the lint filter, condenser and water tank |
| Spare parts | Available - Repairability index 7.5/10 |
Frequently Asked Questions - UPVH880GJMG GE
How do I clean the lint filter?
Clean the lint filter after every drying cycle. Open the door, remove the filter located at the bottom of the drum, remove the lint by hand or with a vacuum cleaner, then rinse it under warm water if necessary. A dirty filter reduces efficiency and increases energy consumption.
How do I empty the condensation water tank?
The tank is usually located at the bottom right of the appliance. Pull it towards you, drain the water into a drain, then replace it correctly. Remember to empty it after each cycle or when the indicator signals it.
What should I do if the dryer does not start?
Check that the door is properly closed, that a program is selected, and that the appliance is correctly plugged in. Check the circuit breaker. If the problem persists, consult the manual for troubleshooting error codes.
How do I maintain the condenser?
The condenser should be cleaned regularly, about once a month. Remove the lower filter, unlock the condenser access panel, then rinse it with clean water. Let it dry before reinstalling.
Why does the laundry still come out damp?
This can be due to a clogged filter, a dirty condenser, an overloaded drum, or an unsuitable cycle. Check these points and select a more intensive program or automatic drying with a humidity sensor.
How do I activate the child lock?
Press and hold the 'Child lock' button or the key combination indicated in the manual for 3 seconds. A light indicator confirms activation. Repeat the operation to deactivate.
What is the maximum drying capacity?
The nominal capacity is 9 kg for cotton. Remember that synthetics and delicates require a smaller load, about 4 to 5 kg.
How can I reduce energy consumption?
Spin the laundry well before drying, clean the filter every cycle, use automatic programs with a humidity sensor, and run the dryer during off-peak hours if your plan allows. Low-temperature drying also consumes less.
Can I install this dryer under a worktop?
This model is designed for under-counter installation thanks to its height of 84.5 cm. Allow 2 to 3 cm of space around the appliance for ventilation. Remove the top cover if necessary and follow the dimensions in the manual.
How do I use the delayed start?
Select the program, press the 'Delayed start' button, then choose the number of delay hours with the +/- buttons. Confirm and start the cycle. The machine will start automatically at the chosen time.
User questions about UPVH880GJMG GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual UPVH880GJMG - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UPVH880GJMG by GE.
USER MANUAL UPVH880GJMG GE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GE
Model : UPVH880GJMG
Category : Tumble dryer