TLS106 - Washing machine SMEG - Free user manual and instructions
Find the device manual for free TLS106 SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing machine |
| Brand | SMEG |
| Model | TLS106 |
| Capacity | 10 kg |
| Maximum Spin Speed | 1400 rpm |
| Display | LED display |
| Number of Programs | 16 |
| Key Programs | Cotton, Synthetics, Delicates, Wool, Hand Wash, Rapid 15' |
| Energy Efficiency Class | E |
| Noise Level (Wash) | 60 dB |
| Noise Level (Spin) | 75 dB |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Weight | 72 kg |
| Power Supply | 220-240 V, 50 Hz |
| Water Consumption per Cycle | 49 L |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Drum Material | Stainless steel |
| Motor Type | Inverter motor |
| Installation Type | Freestanding |
| Colour | White |
| Control Type | Electronic dial and buttons |
| Maintenance and Cleaning | Self-cleaning detergent drawer |
| Safety Features | Overflow protection, unbalanced load detection |
Frequently Asked Questions - TLS106 SMEG
How do I install my SMEG TLS106 washing machine?
Installation should be carried out by a qualified technician. Remove all packaging and transport bolts. Connect the water inlet hose to a tap with a pressure of 0.1-1 MPa. Connect the drain hose to a drain point at least 60 cm above the floor. Level the machine by adjusting the feet. Finally, plug it into a grounded socket. Check that the power supply is 220-240 V and 50 Hz.
What should I do if the washing machine does not start?
First, check that the door is closed properly and the child lock is not activated. Make sure the appliance is plugged in and the water tap is open. If an error code appears, consult the manual. Try resetting the machine by turning it off and unplugging it for 1 minute. If the problem persists, contact customer service.
How do I clean the detergent drawer?
Press the release lever to remove the detergent drawer. Rinse it under warm water to remove detergent residue. Use a soft brush for hard-to-reach areas. Clean the drawer compartment with a damp cloth. Do not put the drawer in the dishwasher. For optimal hygiene, clean the drawer every 2-3 months.
What is the maximum spin speed and how can I adjust it?
The maximum spin speed of the SMEG TLS106 is 1400 rpm. You can adjust it by pressing the spin speed button until the desired speed appears on the display. For delicate fabrics, choose a lower speed. The machine automatically selects the appropriate speed for each program.
How can I use the delay start function?
Load the laundry and select a program. Press the delay start button to delay the cycle by 1 to 24 hours. The selected delay time is displayed. Press the start button to activate. The machine will start automatically after the set delay. This is useful to take advantage of lower electricity rates.
What does the error code E10 mean?
Error code E10 indicates a water supply problem. Check that the water tap is fully open and the inlet hose is not kinked. Also, ensure the water pressure is adequate. Clean the filter in the inlet valve. After resolving the issue, restart the machine. If the code appears again, contact support.
Can I wash shoes or pillows in the washing machine?
Yes, but with precautions. Place shoes in a mesh laundry bag and wash using a gentle cycle. Pillows can be washed in pairs for balance. Use a delicate program and reduce spin speed to avoid damage. Do not wash shoes with metallic parts or pillows with memory foam in the machine.
How often should I clean the pump filter?
The pump filter should be cleaned approximately every 3 months to prevent blockages. To clean, switch off the appliance and unplug it. Open the lower panel, place a bowl under the filter, remove the filter and clean it. Ensure the impeller rotates freely. Refit the filter and panel.
Is the SMEG TLS106 energy efficient?
The TLS106 has an energy efficiency class of E on the EU energy label. It consumes about 0.55 kWh per cycle for a standard 10 kg cotton wash. For better efficiency, use the eco program and load the machine fully. Clean the filter regularly to maintain performance.
How can I troubleshoot unbalanced load issues?
Unbalanced load is often caused by washing a single heavy item, like a duvet. Pause the machine and redistribute the laundry evenly. Reduce the load size, mix large and small items, and use a lower spin speed. If the problem continues, check that the machine is level.
User questions about TLS106 SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual TLS106 - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TLS106 by SMEG.
USER MANUAL TLS106 SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : TLS106
Category : Washing machine