CAU-265 - Welding machine Steren - Free user manual and instructions
Find the device manual for free CAU-265 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Soldering Station |
| Brand | Steren |
| Model | CAU-265 |
| Power Consumption | 60 W |
| Input Voltage | 120 V AC, 60 Hz |
| Temperature Range | 200 - 480 °C |
| Temperature Control | Adjustable knob with analog dial |
| Display | Analog scale |
| Heating Element | Ceramic |
| Included Accessories | Soldering iron, stand, sponge, replacement tip |
| Cable Length | 1.2 m (power cord) |
| Dimensions (approx.) | 15 x 10 x 8 cm (station only) |
| Weight (approx.) | 1.5 kg |
| Housing Material | Heat-resistant ABS plastic |
| Tip Type | Standard chisel tip (replaceable) |
| ESD Safe | Yes |
| Safety Features | Heat-resistant cable, insulated handle, built-in fuse |
| Maintenance | Clean tip with damp sponge; replace tip when worn |
| Compliance | CE, RoHS |
| Warranty | 1 year limited warranty |
| Manual Languages | English, Spanish |
Frequently Asked Questions - CAU-265 Steren
How do I change the soldering iron tip?
Ensure the station is off and unplugged. Allow the tip to cool completely. Gently pull the old tip out of the heating element with pliers if necessary, then insert the new tip firmly until it seats properly.
What is the maximum temperature of the Steren CAU-265?
The maximum temperature is approximately 480 °C (896 °F). Use the adjustable dial to select the desired temperature for your soldering task.
Can I use this station for delicate electronics?
Yes, the temperature control allows you to set low temperatures (around 200 °C) which are suitable for sensitive electronic components. Always use the appropriate tip and avoid prolonged contact.
How do I clean the soldering tip?
While the iron is hot (but not overheated), gently wipe the tip on the damp sponge included with the station. Do not use abrasive materials or files, as they damage the tip coating.
Is the soldering station ESD safe?
Yes, the CAU-265 is designed with ESD-safe materials and a grounded plug, protecting sensitive components from electrostatic discharge during soldering.
What type of tips are compatible with this station?
The CAU-265 uses standard chisel tips with a diameter of approximately 4 mm. Replacement tips are commonly available from Steren or generic suppliers. Ensure the tip fits snugly into the heating element.
Can I leave the soldering station on overnight?
It is not recommended. Turn off and unplug the station when not in use. Leaving it on for extended periods can overheat the tip and reduce its lifespan, and it poses a fire hazard.
What should I do if the station does not heat up?
Check the power cord and outlet. Inspect the ceramic heating element for damage. The built-in fuse may have blown; replace it with an identical rating (e.g., 2A, 250V). If the problem persists, contact Steren support.
How do I adjust the temperature precisely?
The temperature is controlled by a rotary dial on the front panel. Turn it clockwise to increase heat or counterclockwise to decrease. Allow 1-2 minutes for the tip to reach the set temperature.
Is the power cord grounded?
Yes, the CAU-265 is equipped with a three-prong grounded power cord for electrical safety and to provide ESD protection for your work.
User questions about CAU-265 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Welding machine in PDF format for free! Find your manual CAU-265 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CAU-265 by Steren.
USER MANUAL CAU-265 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : CAU-265
Category : Welding machine