COM-785+ - Wi-Fi repeater Steren - Free user manual and instructions
Find the device manual for free COM-785+ Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Wi-Fi Repeater |
| Brand | Steren |
| Model | COM-785+ |
| Wireless standard | IEEE 802.11 b/g/n |
| Frequency band | 2.4 GHz |
| Maximum data speed | 300 Mbps |
| Antenna type | Internal dual antenna |
| Ethernet ports | 1 x 10/100 LAN port |
| Buttons | WPS / Reset button |
| LED indicators | Power, WLAN, LAN, WPS |
| Power supply | AC 100–240 V, 50/60 Hz (built-in) |
| Dimensions (W x H x D) | 10.2 x 7.6 x 3.8 cm (approx.) |
| Weight | 80 g (approx.) |
| Network compatibility | IEEE 802.11 b/g/n devices |
| Security encryption | WEP, WPA, WPA2 |
| Operating range | Up to 50 m indoors (depending on environment) |
| Installation | Plug into a wall outlet and pair via WPS |
| Maintenance | Clean with a dry, soft cloth |
| Safety warnings | Avoid water exposure; do not cover |
| Package contents | Wi-Fi repeater, user manual |
Frequently Asked Questions - COM-785+ Steren
How do I set up my COM-785+ repeater?
To set up your repeater, first plug it into a wall outlet in the same room as your router. Wait for the power LED to turn on. Press the WPS button on your router, then within 2 minutes press the WPS button on the repeater. The connection will be established automatically. Alternatively, you can use a browser to access the repeater's configuration page via a wired connection.
What does the WPS button do?
The WPS (Wi-Fi Protected Setup) button simplifies connecting the repeater to your router. When pressed on both devices, they automatically exchange security settings and pair without needing to enter a password manually. It's the fastest way to set up the repeater.
How can I reset the repeater to factory settings?
To reset the COM-785+, insert a pin or paperclip into the Reset hole and hold it for about 5 seconds while the device is powered on. The LEDs will blink, and the repeater will restart with the default factory settings. You may need to reconfigure it afterwards.
What is the default IP address or login for the repeater?
The default IP address for the Steren COM-785+ is typically 192.168.10.1. You can access the configuration page by connecting your computer to the repeater via Ethernet and typing this address into a browser. The default username and password are usually both admin (check the manual for exact credentials).
Can the repeater work with any router?
Yes, the COM-785+ is compatible with any router that supports IEEE 802.11 b/g/n on the 2.4 GHz band. It functions as a client and rebroadcasts the signal, so it will work with most standard Wi-Fi routers from ISPs and retail brands.
Why is my Wi-Fi speed slower when using the repeater?
A repeater typically halves the maximum wireless speed because it uses the same frequency band for both receiving and transmitting. This is a normal behavior. To minimize the impact, place the repeater halfway between your router and the area with weak signal. Also ensure that the signal from the router to the repeater is strong.
How do I know if the repeater is working properly?
The WLAN LED indicates the Wi-Fi status. If it is solid or blinking, the repeater is transmitting its own network. The LAN LED lights up when a wired device is connected. A signal strength LED (if present) shows the connection quality to the router; green indicates good, red indicates poor.
Is it compatible with internet providers?
Yes, the repeater is not tied to any specific internet provider. It works with any modem, router, or gateway that provides a standard Wi-Fi signal. It simply extends the existing network, so your internet service remains unchanged.
Can I plug it in a power strip?
Yes, the COM-785+ can be plugged into a power strip, but avoid sharing it with high-powered devices that may cause electrical interference. For the best performance, plug it directly into a wall outlet to ensure stable power and adequate heat dissipation.
How do I clean and maintain the repeater?
To clean the repeater, unplug it first and wipe the exterior with a soft, dry cloth. Do not use water, cleaning agents, or abrasive materials. Regular cleaning prevents dust buildup, which can block airflow and cause overheating. Ensure the vents are never covered.
User questions about COM-785+ Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual COM-785+ - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COM-785+ by Steren.
USER MANUAL COM-785+ Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : COM-785+
Category : Wi-Fi repeater