COM-890+ - Wi-Fi repeater Steren - Free user manual and instructions
Find the device manual for free COM-890+ Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater |
| Model Number | COM-890+ |
| Wireless Standard | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Antenna Type | Internal |
| Network Interface | 1 x 10/100 Mbps Ethernet Port |
| Security Protocols | WEP, WPA, WPA2 |
| Power Supply | AC 100-240V, 50/60 Hz |
| Dimensions (LxWxH) | 8.5 x 6.2 x 3.5 cm |
| Weight | 120 g |
| LED Indicators | Power, WLAN, LAN |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% - 90% (non-condensing) |
| Compatibility | Works with any Wi-Fi router or access point |
| Setup Method | WPS button browser-based setup |
| Maintenance | Clean with a dry soft cloth following unplugging the device |
| Safety Warning | Avoid exposure to moisture, heat sources, and direct sunlight |
| Repairability | No user-serviceable parts; contact Steren technical support for service |
| Certifications | FCC, CE |
Frequently Asked Questions - COM-890+ Steren
How do I set up my Steren COM-890+ Wi-Fi repeater?
Connect the repeater to a power outlet and press the WPS button on both your router and the repeater. For manual setup, use a computer or smartphone to connect to the repeater's default network, open a web browser, and follow the on-screen instructions.
What is the best location to place the repeater?
Place the repeater halfway between your router and the Wi-Fi dead zone, but within the router's signal range. Ensure it is in an open area away from walls, metal objects, and electronic interference for optimal performance.
Can I use the COM-890+ with any Wi-Fi router?
Yes, the COM-890+ is compatible with most standard routers operating on the 2.4 GHz frequency and supporting the 802.11 b/g/n protocols. It works with both WEP and WPA/WPA2 security settings.
Why is my repeater not connecting to the router?
Verify that your router uses WPA/WPA2 encryption (WEP may not be supported). Move the repeater closer to the router during setup, disable MAC address filtering on the router, and ensure the router's SSID is not hidden. Restart both devices if needed.
Does the repeater support 5 GHz networks?
No, the COM-890+ is a 2.4 GHz only device. It cannot repeat or broadcast 5 GHz signals. If your router uses a dual-band setup, you can still connect to the 2.4 GHz band with the repeater.
How can I restore the repeater to factory settings?
With the device powered on, use a pin or paperclip to press and hold the RESET button located on the side or bottom of the repeater for about 10 seconds. The LED will blink, indicating the restart and reset process.
What is the maximum speed I can expect?
The theoretical maximum is 300 Mbps, but real-world speeds are typically lower due to distance, obstacles, and interference. The actual speed will also be limited by your internet plan and the router's capabilities.
Can I connect devices via Ethernet cable?
Yes, the COM-890+ includes one Ethernet port. You can connect a computer, smart TV, or gaming console to this port to get a wired connection, while the repeater also provides wireless connectivity to other devices.
Is it safe to leave the repeater on 24/7?
Yes, the repeater is designed for continuous operation. It uses low power consumption and includes heat protection. However, it is recommended to unplug it during lightning storms or if you will be away for an extended time.
How do I clean and maintain the repeater?
Always unplug the device before cleaning. Use a soft dry cloth to wipe the outer surface. Avoid using liquids, sprays, or abrasives. Check the LED indicators periodically to ensure it is functioning properly, and update firmware if available.
User questions about COM-890+ Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual COM-890+ - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COM-890+ by Steren.
USER MANUAL COM-890+ Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : COM-890+
Category : Wi-Fi repeater