COM-816 - Wi-Fi repeater Steren - Free user manual and instructions
Find the device manual for free COM-816 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater / Range Extender |
| Brand | Steren |
| Model | COM-816 |
| Wireless Standard | IEEE 802.11 b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| Ethernet Port | 1 x 10/100 RJ-45 LAN port |
| WPS Button | Yes, for secure one-touch pairing |
| Antennas | 2 external 5 dBi antennas |
| Power Supply | Built-in AC plug (100-240 V, 50/60 Hz) |
| LED Indicators | Power, WLAN and Ethernet status |
| Wireless Security | WEP/WPA/WPA2/WPS |
| Operation Modes | Repeater / Access Point |
| Configuration | Web-based management interface |
| Dimensions | 110 x 70 x 30 mm |
| Weight | 120 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Package Contents | COM-816, Ethernet cable, quick installation guide |
| Maintenance | Wipe with dry fabric; disconnect from power before cleaning |
| Safety | Avoid water, heat and magnetic fields; keep vents clear |
| Repairability | User-replaceable antennas and service by Steren |
Frequently Asked Questions - COM-816 Steren
How can I set up the Steren COM-816 Wi-Fi repeater?
Plug the repeater into an outlet near your router, then press the WPS button on both devices or browse to its web interface to choose the Wi-Fi network to extend. Follow the included quick installation guide for a complete setup.
How do I reset the COM-816 to factory defaults?
Insert a pin into the reset hole and press and hold it for about 10 seconds. The LED indicators will blink and the repeater restarts with default settings.
Does the COM-816 support dual-band Wi-Fi?
No, the Steren COM-816 operates only on the 2.4 GHz band using IEEE 802.11 b/g/n, with a maximum speed of 300 Mbps.
Can I connect a wired device to the repeater?
Yes, it includes a 10/100 Ethernet RJ-45 port that allows you to connect a smart TV, console or computer to the extended network.
How do I change the Wi-Fi password of my extended network?
Open the web-based configuration page, go to the wireless settings, enter a new password in the WPA2 key field and save. The repeater will reboot and apply the change.
Which security protocols are supported?
The repeater supports WEP, WPA and WPA2 encryption, plus WPS for quick secure pairing with compatible routers.
What is the difference between Repeater and Access Point modes?
In Repeater mode, the device extends an existing wireless signal. In Access Point mode, it creates a new network using a wired Ethernet source. Use the mode that fits your setup.
How many devices can connect to the repeater?
With a 300 Mbps 2.4 GHz connection, you can typically connect 15 to 20 devices at the same time, depending on the environment and bandwidth usage.
Where should I place my repeater for the best signal?
Place it halfway between the router and the dead zone, free from metal obstructions and away from microwaves or cordless phones, to maximize coverage.
How should I clean and maintain my COM-816?
Unplug it before cleaning, then wipe the exterior with a soft dry cloth. Avoid liquid cleaners and keep the device in a ventilated, dry area.
User questions about COM-816 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual COM-816 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COM-816 by Steren.
USER MANUAL COM-816 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : COM-816
Category : Wi-Fi repeater