COM-865+ - Wi-Fi repeater Steren - Free user manual and instructions
Find the device manual for free COM-865+ Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater / Range Extender |
| Brand | Steren |
| Model | COM-865+ |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| Number of Antennas | 2 external antennas |
| Antenna Gain | 5 dBi |
| Ports | 1x 10/100 Mbps Ethernet (RJ-45) |
| Security Protocols | WEP, WPA-PSK, WPA2-PSK |
| Setup Method | WPS button or web-based configuration |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Dimensions (approx.) | 112 x 73 x 38 mm |
| Weight (approx.) | 125 g |
| LED Indicators | Power, WLAN, LAN |
| Buttons | WPS / Reset |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% - 90% RH (non-condensing) |
| Compatibility | Works with any Wi-Fi router or access point |
| Cleaning | Disconnect power and wipe with a dry, soft cloth |
| Safety Precautions | Do not expose to water, heat, or direct sunlight |
| Repair and Parts | No user-serviceable parts; contact authorized Steren service center |
Frequently Asked Questions - COM-865+ Steren
How do I reset the Steren COM-865+ Wi-Fi repeater?
Press and hold the Reset button on the side of the device for about 5 seconds until the LED indicators blink. This restores factory defaults and clears all custom settings.
How do I set up the repeater using WPS?
Press the WPS button on your router, then within two minutes press the WPS button on the COM-865+. The indicator will turn solid when the connection is established. If WPS is unavailable, use the browser-based setup.
What is the maximum wireless speed?
The repeater supports 300 Mbps on the 2.4 GHz band, ideal for HD streaming, gaming, and everyday browsing. Real speeds may vary depending on environment and internet plan.
Can it work with any router?
Yes, the COM-865+ is compatible with any Wi-Fi router or access point that supports IEEE 802.11b/g/n. It extends your existing 2.4 GHz network without requiring additional cables.
Does it support 5 GHz networks?
No, this model operates only on the 2.4 GHz frequency. For dual-band use, consider a different Steren repeater that supports both 2.4 GHz and 5 GHz.
How can I improve the Wi-Fi coverage?
Place the repeater halfway between your router and the dead zone, within 50% range. Avoid metal objects, microwaves, and walls. Ensure the WLAN LED is at a stable level indicating a strong signal.
What do the LED indicators mean?
The Power LED shows the device is energized. The WLAN LED indicates wireless connection status: blinking during pairing, solid when linked. The LAN LED blinks when an Ethernet cable is connected and data is transferred.
How do I configure it via a web browser?
Connect to the default Wi-Fi network of the repeater (often COM-865+), open a browser, and enter http://192.168.10.1 or the address indicated in the manual. Log in and follow the setup wizard to select your main network and enter its password.
Is it compatible with all internet service providers?
Yes, the repeater is ISP-independent. It only repeats the Wi-Fi signal from your existing router, so it works with DSL, cable, fiber, or any internet service as long as a Wi-Fi router is present.
How should I clean and maintain the device?
Disconnect the repeater from power before cleaning. Use a soft, dry cloth to remove dust. Do not use liquids, abrasive cleaners, or sprays. Keep vents unblocked and avoid operating in dusty or humid environments.
User questions about COM-865+ Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual COM-865+ - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COM-865+ by Steren.