TC3 - Swimming Pool Jandy - Free user manual and instructions
Find the device manual for free TC3 Jandy in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3-Way Diverter Valve |
| Brand | Jandy |
| Model | TC3 |
| Intended Use | Pool water flow distribution |
| Number of Ports | 3 |
| Port Size | 2 inches (50 mm) slip socket |
| Pipe Connections | Socket union for solvent welding |
| Body Material | High-impact PVC |
| Seal Material | EPDM rubber O-ring seals |
| Maximum Operating Pressure | 50 psi (3.4 bar) |
| Maximum Operating Temperature | 110°F (43°C) |
| Handle Type | Ergonomic PVC handle with positive stop |
| Position Control | Dual-position stop (between ports) |
| Dimensions | 7.5 x 7.5 x 6 in (19 x 19 x 15 cm) |
| Weight | 2.5 lb (1.1 kg) |
| Installation | Direct glue into PVC line, no threading |
| Maintenance | Inspect and lubricate O-rings annually |
| Repair Parts | Replacement handle, lid, O-rings, plunger |
| Safety | Do not exceed rated pressure or temperature |
| Fits | Standard 2-inch pool plumbing |
Frequently Asked Questions - TC3 Jandy
What is the Jandy TC3 used for?
The Jandy TC3 is a 3-way diverter valve designed to direct the flow of pool water through different equipment, such as the pump, filter, heater, or solar system.
What size pipe does the Jandy TC3 fit?
The valve has 2-inch slip socket connections, which are standard for most residential swimming pool plumbing.
How do I install the TC3 valve?
Apply PVC primer and cement to the pipes and insert them into the valve sockets. Allow 24 hours for the glue to cure before pressurizing the system.
What is the maximum pressure and temperature?
It is rated for up to 50 psi and 110°F (43°C). Do not exceed these limits to avoid damage.
How does the three-way control work?
The handle rotates to align the internal plunger, allowing water to flow from one port to either of the two others, or split between them, depending on the plunger position.
How do I maintain the TC3 valve?
Periodically lubricate the O-rings with silicone-based grease and inspect them for wear. Replace if damaged.
Can the TC3 be used in a saltwater pool?
Yes, the PVC body and EPDM O-rings are compatible with saltwater and standard pool chemicals.
What replacement parts are available for the TC3?
Replacement handles, lids, O-rings, and plungers are available from Jandy authorized dealers.
How do I install a replacement handle?
Remove the screw on top, pull off the old handle, align the new handle with the plunger slot, and tighten the screw.
Does the valve come with unions for easy removal?
No, it has slip (socket) connections that must be glued directly to the PVC lines. To remove it, you need to cut the pipe.
User questions about TC3 Jandy
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Swimming Pool in PDF format for free! Find your manual TC3 - Jandy and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC3 by Jandy.
USER MANUAL TC3 Jandy
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Jandy
Model : TC3
Category : Swimming Pool