BK40H - Loudspeaker FOSTEX - Free user manual and instructions
Find the device manual for free BK40H FOSTEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Loudspeaker |
| Brand | FOSTEX |
| Model | BK40H |
| Speaker Design | 2-way bass reflex |
| Frequency Response | 40 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 90 dB / 1 W / 1 m |
| Recommended Amplifier Power | 20 - 100 W per channel |
| Drivers | 165 mm woofer, 25 mm dome tweeter |
| Dimensions (W x H x D) | 200 x 320 x 250 mm |
| Weight | 4.5 kg per speaker |
| Enclosure Material | MDF with vinyl veneer |
| Connectivity | Binding post terminals |
| Placement | Bookshelf or stand-mounted |
| Shielding | Magnetically shielded |
| Power Handling (Peak) | 200 W |
| Cabinet Finish | Black vinyl |
| Usage | Hi-Fi stereo, home theater |
| Care and Cleaning | Wipe with a soft dry cloth |
| Safety Warning | Keep away from water and heat sources |
| Repair and Service | Contact authorized FOSTEX service center |
Frequently Asked Questions - BK40H FOSTEX
How should I connect the FOSTEX BK40H to my amplifier?
Use high-quality speaker wire and connect the binding posts to your amplifier's speaker terminals, ensuring correct polarity (+ to +, - to -).
What amplifier power is recommended for the BK40H?
An amplifier delivering between 20 and 100 watts per channel is recommended. Avoid excessive distortion to prevent speaker damage.
Where should I place the BK40H speakers for best sound?
Place them on sturdy stands or bookshelves at ear level, at least 20 cm from the rear wall to optimize bass response and stereo imaging.
Can I use the BK40H in a home theater system?
Yes, the BK40H works well as front or rear channels in a small to medium home theater setup with a subwoofer.
How do I clean the speakers safely?
Use a soft, dry microfiber cloth to gently remove dust from the cabinet and grille. Do not use water or abrasive cleaners.
What is the impedance and sensitivity of the BK40H?
The nominal impedance is 8 ohms, and sensitivity is 90 dB / 1 W / 1 m, making them an easy load for most amplifiers.
Are the BK40H speakers magnetically shielded?
Yes, they are magnetically shielded, allowing placement near CRT televisions without interference (not necessary for modern LCD/OLED TVs).
Can I wall-mount the BK40H?
It is not recommended to wall-mount this bookshelf speaker as it may compromise bass performance; using stands is preferable.
What type of speaker cable should I use?
Use 16-gauge or thicker speaker wire for runs up to 10 meters, and ensure connections are secure to avoid sound degradation.
What should I do if one speaker produces no sound?
Check all connections, swap the speaker cable from left to right to isolate the issue. If the problem persists, contact customer support for repair.
User questions about BK40H FOSTEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual BK40H - FOSTEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BK40H by FOSTEX.
USER MANUAL BK40H FOSTEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FOSTEX
Model : BK40H
Category : Loudspeaker