SC-600 - Measuring instrument Amprobe - Free user manual and instructions
Find the device manual for free SC-600 Amprobe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Digital clamp meter |
| Brand | Amprobe |
| Model | SC-600 |
| Display | Backlit LCD |
| AC voltage | 0.1 mV to 600 V |
| DC voltage | 0.1 mV to 600 V |
| AC current | 0.1 A to 600 A |
| Resistance | 0.1 Ω to 40 MΩ |
| Capacitance | 1 nF to 100 µF |
| Frequency | 0.01 Hz to 10 kHz |
| Main functions | Leakage current measurement, true RMS (TRMS) |
| Electrical safety | CAT IV 600 V, CAT III 1000 V |
| Protection rating | IP40 |
| Power supply | 2 AAA 1.5 V batteries |
| Dimensions (L x W x H) | 230 x 70 x 40 mm |
| Weight | Approximately 300 g |
| Operating temperature | -10 °C to 50 °C |
| Operating humidity | 0 to 80% RH |
| Maintenance and cleaning | Clean with a dry cloth, do not use solvents |
| Calibration frequency | Recommended once a year |
| Included accessories | Batteries, test leads, protective holster |
Frequently Asked Questions - SC-600 Amprobe
How to use the clamp meter to measure current?
Open the clamp jaws and place the conductor inside. Make sure the conductor is well centered. The clamp measures current without interrupting the circuit. Select the AC current (A~) or DC current (A⎓) function according to the type of current.
What is the safety category of the device?
The SC-600 is rated CAT IV 600 V and CAT III 1000 V. This means it can be used on low-voltage installations, including upstream of the electrical panel and on light industrial circuits.
How to change the batteries of the clamp?
Turn off the device, remove the protective holster and locate the battery compartment at the rear. Remove the two used AAA batteries, insert new batteries respecting polarity, then close the compartment. A low battery indicator appears on the screen when replacement is necessary.
What does displaying the value 'OL' on the screen mean?
'OL' stands for 'Overload' (range exceedance). This indicates that the measured value exceeds the selected range. Select a higher range or stop the measurement to avoid damaging the device.
Can DC voltages be measured with this device?
Yes, the SC-600 measures DC voltages up to 600 V. Turn the selector to the V⎓ position and connect the test leads to the appropriate terminals, respecting polarity.
How to perform a resistance measurement?
Before measuring, make sure the circuit is de-energized. Select the Ω function, connect the test leads on either side of the component to be measured, then read the value on the screen. The continuity function is also available with an audible tone if the resistance is below a given threshold.
Does the device have backlighting?
Yes, the SC-600 has built-in backlighting for easy reading in dark areas. Press the dedicated button to turn it on or off.
What is the maximum measurable frequency?
The SC-600 can measure frequencies up to 10 kHz. This function is useful for checking the frequency of AC signals on motors or power supplies.
How to maintain the device to ensure its reliability?
Store the clamp in its protective holster away from dust and moisture. Clean the housing with a dry, non-abrasive cloth. Never use solvents or corrosive products. Have the calibration checked once a year by an accredited laboratory.
What safety precautions should be followed?
Always use test leads in good condition and suitable for the safety category. Never exceed the maximum values indicated on the device. Work on de-energized circuits whenever possible, and wear personal protective equipment when measuring on live installations.
User questions about SC-600 Amprobe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring instrument in PDF format for free! Find your manual SC-600 - Amprobe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC-600 by Amprobe.
USER MANUAL SC-600 Amprobe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Amprobe
Model : SC-600
Category : Measuring instrument