Heat Bag 1.0 - Electric heating LENZ - Free user manual and instructions

Product Type	Electric heating bag for shoes and textiles
Brand	LENZ
Model	Heat Bag 1.0
Intended Use	Preheating and drying of shoes, gloves, socks, hats and other textiles
Heating Mats Included	1x 240VAC heating mat, 1x 12VDC car heating mat
Mains Power Supply	240V~ / 50Hz
Mains Power Consumption	90W
Car Power Supply	12V DC
Car Power Consumption	50W
Safety Features	Overheating protection, temperature control
Operation Time	Heating starts after 1/2 hour; textiles warmed after a few hours (overnight)
Important Usage Restriction	Do not use the 240VAC and 12VDC mats simultaneously
Ventilation	Ventilation openings at the top must not be covered during use
Cleaning	Remove mats first; clean the bag with a damp cloth only
Child Safety	Not suitable for children under 36 months; older children only under adult supervision
Operating Environment	Indoor, closed, dry rooms only
Standards	CE compliant; complies with relevant EU regulations

Frequently Asked Questions - Heat Bag 1.0 LENZ

What is the LENZ Heat Bag 1.0 used for?

The Heat Bag 1.0 is designed for preheating and drying of shoes, gloves, socks, hats and other textiles. It includes two heating mats: one for 240VAC mains and one for 12VDC car use.

Can I use both heating mats at the same time?

No, you must never use the 240VAC heating mat and the 12VDC car heating mat simultaneously. This is strictly forbidden for safety reasons. Use only one mat at a time.

Is the Heat Bag 1.0 safe for children?

The device is not suitable for children under 36 months. Children aged 8 and older may use it under adult supervision. Always keep children away from the device while it is operating.

How long does it take to warm up shoes?

The heating effect starts after half an hour. After a few hours, ideally overnight, the shoes or textiles are fully warmed up. Always follow the recommended operating time.

How should I clean the heat bag?

Before cleaning, disconnect the mats from the power supply and remove them from the bag. Use only a damp cloth to clean the bag. Never immerse it in water or use harsh cleaners.

What should I do before using the heat bag in a car?

First, disconnect the heat bag from the 240VAC mains. Only then connect it to the 12V car power. Also, always disconnect the unit from the power supply when the engine is not running.

Can I put wet or snowy items inside?

You should remove snow, ice, water and dirt from the products before placing them into the heat bag. This prevents damage and ensures efficient drying.

What safety features does the Heat Bag 1.0 have?

It includes overheating protection and temperature control to prevent excessive heat. Additionally, never cover the ventilation openings and do not leave the device unattended while switched on.

Can I dry synthetic materials in the heat bag?

Do not place products in the heat bag if they are not suitable for temperatures above 55°C. Check the warning labels on your items to ensure they are safe for use in a heating bag.

How should I dispose of the product?

Dispose of the product and its packaging in an environmentally-friendly way according to local regulations. Do not throw it in household trash; take it to a collection site for electrical waste.

USER MANUAL Heat Bag 1.0 LENZ

Manufacturer's address:

Operating Instruction

ENGLISCH

content

SAFETY INSTRUCTIONS....2

TECHNICAL SPECIFICATIONS ....3

SAFETY FUNCTIONS....3

FUNCTION DESCRIPTION....3

IMPORTANT INSTRUCTIONS FOR USE ....3

OPERATING 3

CLEANING NOTES....3

DISPOSAL 4

INTRODUCTION

Congratulations on your purchase of this heat bag 1.0.

Please read the operating instructions carefully before operating the device.

Please retain these instructions and pass them on to other users.

PACKAGE CONTENTS

1 heat bag 1.0

1 heating mat 240VAC

1 heating mat 12VDC (car version)

SAFETY PRECAUTIONS

• This device can be used by children 8 years of age and older as well as by individuals with reduced physical, sensory or mental abilities or lack of experience and know-how, if they are supervised or have been instructed in the safe handling of the device and understand the resulting dangers. Children may not use this device as a toy. Children may not perform cleaning or maintenance work, unless they are supervised.
  • Not suitable for children under the age of 36 months. (a)
  • Children may only use the product under the supervision of an adult.
• Children should be supervised to make sure that they are not using the device as a toy.
• Please read the operating instructions carefully. (b)
• This device is only designed for drying shoes and textiles, which have not been cleaned with flammable substances.
• The device may not be used to warm animals.
• Check that your supply voltage is compatible with the voltage specifications of the unit. If yes, switch on the unit.
• Make sure that the unit is not wet (e.g. by spray water) and do not use it if your hands are wet. Always disconnect the unit from the power supply after use.
• Use this device only in closed, dry rooms.
• If the cable or housing parts are damaged, send the unit to a specialized repair facility.
• Repairs to electrical equipment may only be carried out at specialized repair facilities. Incorrect repairs can cause substantial dangers for the user.
• Never wind the power cable around the heatbag.
• When not in use, store the unit dry.
• Do not leave this device switched on while unattended.
• The unit must not be used for any purpose other than its intended use.
• Devices with a rated voltage of 12 V DC may only be supplied with safety extra-low voltage in accordance with the marking on the device.

(a)

(b)

TECHNICAL SPECIFICATIONS

heating mat 240VAC: 240V\~ / 50Hz 90W

heating mat 12VDC: 12V--- / DC 50W (Car Version)

SAFETY FUNCTIONS

• Overheating protection
• Temperature control

FUNCTION DESCRIPTION

- For preheating and drying of shoes, gloves, socks, hats and other textiles.

IMPORTANT INSTRUCTIONS FOR USE

Attention:

• The heat mat 12VDC must be placed above the 240VAC heating mat, to get best heating performance.
• It is not allowed to use the 240VAC heating mat and the 12VDC heating mat(car) at the same time.
• During operation, ensure that the ventilation openings at the top of the bag not be covered.
• Do not place products in the heatbag, if not suitable for temperatures above 55° C. (read warning notes on the products)
• Remove snow, ice, water and dirt from the products, before place into the heatbag.
• Always disconnect the unit from the power supply when the engine isn't running.

OPERATING

Place the products in the heat bag and close the zip.

Connect the heating pocket to the 240VAC mains.

The heat effect will start after 1/2 hour, after another few hours the products are warmed up. (overnight)

Before further use of the heater bag in the car, first disconnect the heat bag from the 240VAC mains, only then connect to the 12V car power.

CLEANING NOTES

The mats must be disconnected from the mains.

Remove the heating mats from the heat bag before cleaning.

Use damp cloth only for cleaning the heat bag.

DISPOSAL

If the product can no longer be used, please dispose of it and its packaging in an environmentally-friendly way that is in accordance with current regulations.

Do not throw the product away with normal household trash. Instead, dispose of the parts at a collection site for electrical waste. (c)

Packaging materials are raw materials and can be recycled. For this reason, please recycle the packaging.

Please contact your local authority for more information.

Information subject to change.

This product complies with the relevant EU regulations and guidelines.

CE

Manufacturer's address: