POOH2009 - Element Point - Free user manual and instructions
Find the device manual for free POOH2009 Point in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Storage Water Heater |
| Brand | Point |
| Model | POOH2009 |
| Capacity | 200 liters |
| Rated Power | 2500 W |
| Voltage | 230 V ~ 50 Hz |
| Temperature Range | 30°C to 75°C (adjustable thermostat) |
| Dimensions (H × Ø) | 150 cm × 60 cm |
| Weight (Empty) | 50 kg |
| Insulation | Polyurethane foam insulation for low energy loss |
| Heating Element | Stepped heating element (resistance) with dry heating system |
| Anode | Magnesium anti-corrosion anode, replaceable |
| Safety Features | Overheat protection, thermal cut-off, high-pressure safety valve |
| Installation | Vertical, wall-mounted or floor-standing |
| Water Connection | 1/2" or 3/4" BSP inlet/outlet connections |
| Energy Efficiency | Thermal resistance class B, heat loss < 120 kWh/year (est.) |
| Maintenance | Check anode annually, drain and descale as required |
| Spare Parts | Replaceable thermostat, heating element, anode, safety valve, gaskets |
Frequently Asked Questions - POOH2009 Point
How do I adjust the temperature on my Point POOH2009 water heater?
The thermostat is located behind the lower access panel. Use a slotted screwdriver to turn the adjustment knob to your desired temperature. The factory setting is usually 65°C. For energy savings, a setting of 55-60°C is recommended. Always disconnect power before adjusting.
What is the capacity of the POOH2009?
The POOH2009 has a storage capacity of 200 liters, suitable for a family of 3 to 4 people.
How often should I replace the magnesium anode?
The magnesium anode should be inspected every year and replaced every 3 to 4 years, depending on water hardness. A worn anode reduces corrosion protection of the tank.
Why is my water heater leaking from the pressure relief valve?
The pressure relief valve may be releasing due to normal expansion or a faulty valve. Check if the valve is working correctly and replace if necessary. If the leak persists, the pressure may be too high – ensure the pressure reducing valve is installed if supply pressure exceeds 5 bar.
How long does it take to heat the full tank?
With a 200-liter tank and a 2500W heating element, the heating time from cold to 65°C is approximately 4-5 hours. Actual time depends on the inlet water temperature.
Can I install the POOH2009 myself?
Installation must be carried out by a qualified professional in accordance with local regulations. Improper installation may result in a safety hazard and void the warranty.
Why is my hot water supply running out quickly?
This can be caused by a malfunctioning thermostat, timed programming settings, or a broken heating element. Also check for an oversized draw or a low tank temperature. If the problem persists, contact a technician.
What should I do if my water heater is not heating?
Check if power is connected, the fuse is intact, and the thermostat is not set too low. The heating element might be burnt out; test and replace if necessary. Always isolate the power supply before any inspection.
How do I drain the water heater?
Turn off power and water supply, connect a hose to the drain valve at the bottom, open the valve and a hot water tap to allow drainage. Re-close the valve after draining.
Does the POOH2009 come with a warranty?
The standard warranty period is 5 years for the tank and 2 years for electrical components. Keep your purchase receipt and local dealer may apply specific terms.
User questions about POOH2009 Point
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Element in PDF format for free! Find your manual POOH2009 - Point and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POOH2009 by Point.