TDS-75CV - Polisher Vevor - Free user manual and instructions
Find the device manual for free TDS-75CV Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Rotary electric polisher |
| Brand | Vevor |
| Model | TDS-75CV |
| Dimensions (L × W × H) | Approximately 30 × 20 × 15 cm |
| Weight | Approximately 2.5 kg |
| Power supply | Mains: 230 V ~ 50 Hz |
| Power | 750 W |
| Variable speed | 1000 to 3000 rpm |
| Plate diameter | 75 mm |
| Main functions | Polishing, buffing, light sanding |
| Speed variator | With adjustment wheel |
| Protective cover | Yes, removable |
| Power cable | 2-meter length |
| Maintenance and cleaning | Clean with a dry cloth after use, check the carbon brushes |
| Safety | Spindle lock, overload protection |
| Spare parts | Carbon brushes, plate, pads, nuts |
| Repairability | Easy access to carbon brushes and plate holder |
| Included accessories | Side handle, tightening wrench, polishing pads |
| General information | Designed for automotive and bodywork, domestic and professional use |
Frequently Asked Questions - TDS-75CV Vevor
How do I change the plate on my Vevor TDS-75CV polisher?
To change the plate, first unplug the device and lock the spindle using the lock button. Use the supplied wrench to unscrew the central nut. Remove the old plate, place the new one, then tighten it firmly. Make sure the plate is properly centered before using the polisher again.
What speed should I use to polish a car?
We recommend starting at low speed (about 1000 to 1500 rpm) to apply the polishing product. Then gradually increase to 2000-2500 rpm for the final polishing. Keep the machine moving constantly to avoid marking the paint.
How do I replace the motor carbon brushes?
Worn carbon brushes are a common cause of breakdown. Unplug the machine, locate the plastic caps at the rear of the motor, unscrew them, extract the old brushes and insert the new ones. For the TDS-75CV, use carbon brushes of 6.3 × 5.8 mm. Then screw the caps back on and test at no load.
The polisher no longer starts, what should I do?
First check the power supply and the cable. If the cable is damaged, replace it or have it replaced by a professional. Then check the condition of the carbon brushes, because if they are worn, the motor can no longer operate. Finally, check the speed variator and the switch. If the problem persists, contact Vevor after-sales service.
What accessories are compatible with the TDS-75CV?
This polisher uses 75 mm plates with M14 thread. All 75 mm polishing and sanding pads with hook-and-loop fastening are compatible. Also make sure that the bits and discs are intended for a maximum speed of 3000 rpm.
How do I maintain my polisher to extend its lifespan?
After each use, unplug the device and remove the cover to remove dust and product residue with a soft cloth. Clean the ventilation slots to prevent overheating. Regularly check the tightness of the screws and the condition of the carbon brushes. Store the machine in a dry and safe place.
Can this polisher be used on metal or wood?
Yes, with the appropriate accessories. For metal, use polishing pads and specific polishing pastes. For wood, use fine-grit sanding pads and proceed at low speed. Always make sure to use the right accessory for each material to avoid any damage.
The power cable is damaged, can I replace it myself?
If you are experienced, you can replace the cable by opening the housing and disconnecting the three wires. Use a cable of the same section (3 × 0.75 mm²) and respect the colors. If you are not sure, call a qualified electrician to avoid any risk.
What is the power and maximum speed?
The Vevor TDS-75CV develops a power of 750 W and its speed is variable from 1000 to 3000 rpm. This range allows precise work on different surfaces, from applying products to bright finishing.
How should I store the polisher after use?
After cleaning it, coil the cable loosely. Attach a protective pad to the plate to avoid shocks. Place the machine in a clean, dry place, away from moisture and out of reach of children. A dedicated box or drawer is ideal.
User questions about TDS-75CV Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Polisher in PDF format for free! Find your manual TDS-75CV - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TDS-75CV by Vevor.
USER MANUAL TDS-75CV Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : TDS-75CV
Category : Polisher