DC20003 - Dust separator Vevor - Free user manual and instructions
Find the device manual for free DC20003 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Cyclone dust separator |
| Brand | Vevor |
| Model | DC20003 |
| Usage | Carpentry workshop, extraction of sawdust and shavings |
| Connection diameter | 100 mm (4 inches) |
| Tank capacity | 60 L |
| Motor power | 2.2 kW (3 hp) |
| Power supply | 230 V / 50 Hz |
| Airflow rate | 2200 m³/h |
| Noise level | approx. 85 dB(A) |
| Dimensions (L × W × H) | 650 × 450 × 850 mm |
| Weight | 18 kg |
| Material | Lacquered steel |
| Filtration | Pleated cartridge filter |
| Connection | 100 mm hose with adapters for tools |
| Switch | On/Off with thermal protection |
| Main functions | Cyclonic particle separation, extraction combinable with machines and tools |
| Maintenance and cleaning | Drain the tank regularly, clean the filter and check the seals |
| Safety | Do not vacuum liquids, hot ashes or hazardous dusts |
| Spare parts | Filter, seal and tank available separately |
| Repairability | Motor and switch replaceable, easy opening of the housing |
| Warranty | 2 years |
| Certifications | CE |
| Package contents | Separator, tank, hose, adapters, clamps and manual |
Frequently Asked Questions - DC20003 Vevor
Can this separator be used with a router?
Yes, you can connect it to a router using the supplied adapter. The airflow is sufficient to capture most wood dust.
How do I connect the suction hose?
Attach the 100 mm hose to the separator inlet, then use the adapters to connect it to your tool. Tighten the clamps to prevent any air leaks.
When should I empty the tank?
Empty the tank as soon as it is three-quarters full. This helps maintain efficient suction and prevents shavings from accumulating in the filter.
How do I clean the DC20003 filter?
Use compressed air or gently shake the filter to dislodge dust. Do not wash it with water, as this could damage the filter media.
What is the required electrical power?
The device operates on a standard domestic outlet of 230 V / 50 Hz. Make sure the circuit supports at least 10 A.
Can I vacuum water with this separator?
No, this separator is designed only for dry dust. Vacuuming water or liquids can damage the motor and the filter.
Is the separator noisy?
The noise level is approximately 85 dB(A). Wear hearing protection, especially if you work for extended periods nearby.
How do I install the separator in my workshop?
Place it on a stable, flat surface near your machines. Connect the hose to the tool and firmly secure the tank to prevent vibrations.
What accessories are included?
The package includes the separator, the 60 L tank, a hose, adapters, clamps and the user manual. These elements allow immediate installation.
Where can I find spare parts?
You can order spare parts directly from Vevor or via customer service. The most requested parts are the filter, seal and tank.
User questions about DC20003 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dust separator in PDF format for free! Find your manual DC20003 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DC20003 by Vevor.
USER MANUAL DC20003 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : DC20003
Category : Dust separator