KEX-10 - Pumps Vevor - Free user manual and instructions
Find the device manual for free KEX-10 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Pump |
| Model | KEX-10 |
| Brand | Vevor |
| Power Supply | AC 220-240V, 50Hz |
| Rated Power | 750W |
| Max Flow Rate | 60 L/min |
| Max Head | 35m |
| Max Suction Lift | 8m |
| Inlet/Outlet Diameter | 1 inch (25.4mm) |
| Dimensions (W × D × H) | 260 × 200 × 300 mm |
| Weight | 6.5 kg |
| Main Functions | Water transfer, irrigation, garden watering |
| Maintenance | Inspect and clean strainer and impeller regularly |
| Cleaning | Flush with clean water after each use |
| Safety Features | Thermal overload protection, IPX4 splash-proof |
| Spare Parts | Available from Vevor authorized distributors |
| Repairability | User-replaceable impeller and seals; repair manual included |
| General Information | User manual in multiple languages, 96 pages |
Frequently Asked Questions - KEX-10 Vevor
How do I prime the KEX-10 pump before first use?
Fill the pump casing with water through the priming port until it overflow, then start the motor. This ensures the impeller is submerged and prevents dry running.
What type of fluid can I pump with this device?
This pump is designed for clean water and non-corrosive liquids. Avoid pumping flammable or abrasive fluids to prevent damage and safety hazards.
How often should I clean the strainer?
Clean the strainer after every use, especially if pumping water with debris. A clogged strainer can reduce flow and cause pump overheating.
Why is my pump not starting?
Check the power supply, fuse, and thermal overload switch. Also ensure the pump is correctly primed and that the impeller is not jammed by debris.
Can the pump run without water?
No, the pump must always be filled with water before operation. Running dry damages the mechanical seal and impeller.
What is the maximum suction depth?
The maximum suction lift is approximately 8 meters. Installing the pump closer to the water source improves performance.
How do I replace the impeller?
Disconnect power, remove the pump housing, and detach the impeller from the motor shaft. Install the new impeller and reassemble. Refer to the manual for torque specifications.
Are spare parts available for the Vevor KEX-10?
Yes, spare parts such as impellers, seals, and strainers are available from Vevor distributors or authorized online stores.
Can I use the pump for saltwater?
This pump is not corrosion-resistant; saltwater will damage internal components. Use a specialized marine pump for saltwater applications.
How should I store the pump during winter?
Drain all water, dry the pump, and store it indoors in a frost-free environment. Disconnect hoses and protect the pump from freezing temperatures.
User questions about KEX-10 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pumps in PDF format for free! Find your manual KEX-10 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KEX-10 by Vevor.
USER MANUAL KEX-10 Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : KEX-10
Category : Pumps