QD-XDP01 - Pressure washer Vevor - Free user manual and instructions
Find the device manual for free QD-XDP01 Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric pressure washer |
| Brand | Vevor |
| Model | QD-XDP01 |
| Maximum working pressure | 130 bar |
| Maximum water flow | 5,5 L/min |
| Power consumption | 1500 W |
| Voltage / frequency | 230 V / 50 Hz |
| High-pressure hose length | 5 m |
| Supply hose length | 2,5 m |
| Dimensions (L × W × H) | 35 × 28 × 27 cm |
| Net weight | 5,2 kg |
| Protection level | IPX5 |
| Feed water temperature | max 40 °C |
| Detergent tank | 0,5 L (integrated) |
| Included nozzles | 2 (direct jet and rotary jet) |
| Main functions | Cleaning vehicles, walls, patios, tools, etc. |
| Maintenance and cleaning | Drain the circuit and clean the water inlet filter after each use |
| Safety | Lockable trigger, thermal circuit breaker, frost protection |
| Spare parts and repairability | Spare parts available from Vevor, high repairability |
| General information | 151-page manual available for free download, multilingual support |
Frequently Asked Questions - QD-XDP01 Vevor
How do I descale or drain the pressure washer?
To drain the circuit, disconnect the high-pressure hose and the water supply, then let the machine run dry for a few seconds. Descaling can be done with a suitable descaler by circulating it through the system, followed by a rinse with clean water.
What type of detergent can I use?
Use only non-acidic foaming detergents specially designed for pressure washers. Pour it into the integrated tank, then adjust the nozzle to low pressure to apply the foam.
The pressure seems low, what should I check?
First check that the water supply is fully open, then inspect the inlet filter for any clogging by impurities. Also make sure the hose is not kinked or blocked, and that the nozzle is not worn.
Can I use the appliance with hot water?
No, this model is designed for cold water only. The maximum water temperature must not exceed 40 °C, otherwise you risk damaging the pump and seals.
How do I clean the appliance filter?
Unscrew the water inlet connector, remove the mesh filter and rinse it under running water. If the filter is dirty, use a soft brush. Put it back after it is completely dry.
The hose comes off during use, what should I do?
Make sure the hose connector is properly engaged in the gun and the machine outlet. Push firmly until it clicks into place (click to lock). If a seal is damaged, replace it to prevent leaks.
What is the length of the power cord?
The power cord is about 3 meters long, which makes it easy to move around the washing area. Use a suitable extension cord if necessary, with a minimum cross-section of 1.5 mm² to avoid power losses.
Is it suitable for washing a car?
Yes, this pressure washer is ideal for car washing. The maximum pressure of 130 bar and the flow rate of 5.5 L/min effectively remove dirt, while using low pressure for detergent and rinsing.
What should I do if the machine does not start?
First check that the machine is plugged in and the outlet works. Then inspect the thermal circuit breaker and the safety button. If the problem persists, have the motor block and electrical connections checked by a professional.
How should I store the appliance after use?
After each use, turn off the water supply, then briefly pull the trigger to release pressure from the circuit. Disconnect the hose and the inlet hose, empty the detergent tank, and dry the surfaces. Store it in a dry place protected from frost.
User questions about QD-XDP01 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual QD-XDP01 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QD-XDP01 by Vevor.